The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for retry count
- pull Community Retry Count
- pullCommRetryCount 1.3.6.1.4.1.311.1.2.2.2 (defined in WINS-MIB)
This variable gives the retry count in case of comm failure when doing pull replication. This is the max. number of retries that will be done at the interval specified for the Partner before WINS will stop for a certain number (canned) of replication time intervals before starting again. - pw Dot11 Retry Count
- pwDot11RetryCount 1.3.6.1.4.1.890.1.9.6.1.1.2 (defined in ZYXEL-NWA-SERIES)
This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. - atm LAN Emulation Client Max Retry Count
- atmLecMaxRetryCount 1.3.6.1.4.1.800.2.4.8.1.1.15 (defined in XYLAN-ATM-MIB)
C13 Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Count times, after the first LE_ARP_REQUEST for that same frame's LAN destination. - Frame Relay Interface Port Default Compression P Retry Count
- frxPortDefaultCompressionPRetryCount 1.3.6.1.4.1.800.2.8.1.1.1.9 (defined in XYLAN-FRAME-RELAY-MIB)
The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object controls the default value for P-Retry-Count for an unconfigured (dynamic) virtual circuit. This object represents the number of retries before giving up on the negotiation phase and not running compression on the virtual circuit. - Frame Relay Interface Vc Control Compression P Retry Count
- frxVcControlCompressionPRetryCount 1.3.6.1.4.1.800.2.8.2.1.1.7 (defined in XYLAN-FRAME-RELAY-MIB)
The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object represents the number of retries before giving up on the negotiation phase and not running compression on the virtual circuit. - x25 Statistics Retry Count Exceededs
- x25StatRetryCountExceededs 1.3.6.1.2.1.10.5.3.1.24 (defined in rfc1382)
The number of times a retry counter was exhausted. - atp Retry Count Exceededs
- atpRetryCountExceededs 1.3.6.1.2.1.13.10.6 (defined in rfc1742)
The number of times the retry count was exceeded, and an error was returned to the client of ATP. - Network AppleTalk Hosts Retry Count
- nwAtHostsRetryCount 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.2 (defined in ctron-appletalk-router-mib)
Indicates the maximum number of times AppleTalk Routing Services will retry each attempt to resolve a host address. - Network Ip Hosts Retry Count
- nwIpHostsRetryCount 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.1.2 (defined in ctron-ip-router-mib)
Indicates the maximum number of times IP Routing Services will retry each attempt to resolve a host address. - sfps Mobility Statistics Originating Retry Send Count
- sfpsMobilityStatsOrigRetrySendCount 1.3.6.1.4.1.52.4.2.4.2.2.9.2.3.6 (defined in ctron-sfps-resolve-mib)
- sfps Mobility Statistics Gen Request Retry Count
- sfpsMobilityStatsGenReqRetryCount 1.3.6.1.4.1.52.4.2.4.2.2.9.2.3.16 (defined in ctron-sfps-resolve-mib)
- sfps Mobility Statistics Retry Count
- sfpsMobilityStatsRetryCount 1.3.6.1.4.1.52.4.2.4.2.2.9.2.3.44 (defined in ctron-sfps-resolve-mib)
- Token Ring Management Bcn Rec Brd Bypass Retry Count
- tRingMgmtBcnRecBrdBypassRetryCount 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18 (defined in dot5-log-mib)
This object defines the number of times a token ring MIM board, having been bypassed by beacon recovery, will be un-bypassed to determine if the MIM board is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad value. Valid integer values are defined as: 0 ...disable MIM bypass retries 1 - 100 ...retry MIM board un-bypass n times 999 ...retry MIM board un-bypass infinite times Default value is 1. - Token Ring Management Bcn Rec Brd Wrap Retry Count
- tRingMgmtBcnRecBrdWrapRetryCount 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.20 (defined in dot5-log-mib)
This object defines the number of times a token ring MIM board, having been wrapped left or right by beacon recovery, will be un-wrapped to determine if the MIM board is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad value. Valid integer values are defined as: 0 ...disable MIM bypass retries 1 - 100 ...retry MIM board un-bypass n times 999 ...retry MIM board un-bypass infinite times Default value is 1. - port Bsci Admin Slow Poll Retry Count
- portBsciAdminSlowPollRetryCount 1.3.6.1.4.1.173.7.3.4.1.1.17 (defined in netlink-specific-mib)
before it is put on the slow poll list. - port Bsci Operation NAK Retry Count
- portBsciOperNAKRetryCount 1.3.6.1.4.1.173.7.3.4.2.1.25 (defined in netlink-specific-mib)
send a frame when the receiving device is unable to acknowledge. - l S Sdlc Admin Retry Count
- lSSdlcAdminRetryCount 1.3.6.1.4.1.173.7.3.5.3.1.5 (defined in netlink-specific-mib)
This object is used, only when lSSdlcAdminAutoCall object is yes. This defines the number of times the connection initiation is retried before given up. The value of Zero(0) means to try indefinitely - l S Sdlc Operation Retry Count
- lSSdlcOperRetryCount 1.3.6.1.4.1.173.7.3.5.4.1.5 (defined in netlink-specific-mib)
This object is used, only when lSSdlcAdminAutoCall object is yes. This defines the number of times the connection initiation is retried before given up. The value of Zero(0) means to try indefinitely - bsn AP If Dot11 Retry Count
- bsnAPIfDot11RetryCount 1.3.6.1.4.1.14179.2.2.6.1.3 (defined in AIRESPACE-WIRELESS-MIB)
This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. - bsn AP If Dot11 Multiple Retry Count
- bsnAPIfDot11MultipleRetryCount 1.3.6.1.4.1.14179.2.2.6.1.4 (defined in AIRESPACE-WIRELESS-MIB)
This counter shall increment when an MSDU is successfully transmitted after more than one retransmission. - Cisco ASP Protocol Port Retry Count
- asppPortRetryCount 1.3.6.1.4.1.9.9.55.1.1.1.1.12 (defined in CISCO-ASPP-MIB)
Specifies the maximum number of timers a packet will be retransmitted before the connection with the terminal will be disconnected. - Cisco ATMX Vcl Oam Up Retry Count
- catmxVclOamUpRetryCount 1.3.6.1.4.1.9.9.88.1.2.1.1.3 (defined in CISCO-ATM-EXT-MIB)
Specifies OAM retry count before declaring a VC is up. - Cisco ATMX Vcl Oam Down Retry Count
- catmxVclOamDownRetryCount 1.3.6.1.4.1.9.9.88.1.2.1.1.4 (defined in CISCO-ATM-EXT-MIB)
Specifies OAM retry count before declaring a VC is down. - Cisco Data Collection VFile Transfer Configuration Retry Count
- cdcFileXferConfRetryCount 1.3.6.1.4.1.9.9.312.1.3.1.1.4 (defined in CISCO-DATA-COLLECTION-MIB)
Maximum number of times, transfer has to be retried. If the retry count exceeds this value, then no further attempts will be made. This object's value may be modified at any time. - Cisco Digital Subscriber Line Atm Pvc Oam Retry Up Count
- cdslAtmPvcOamRetryUpCount 1.3.6.1.4.1.9.10.30.1.4.2.1.17 (defined in CISCO-DSL-PROVISION-MIB)
This object indicates the OAM retry count before declaring a VC is up. - Cisco Digital Subscriber Line Atm Pvc Oam Retry Down Count
- cdslAtmPvcOamRetryDownCount 1.3.6.1.4.1.9.10.30.1.4.2.1.18 (defined in CISCO-DSL-PROVISION-MIB)
This object indicates the OAM retry count before declaring a VC is down. - Cisco DSPU Pu Admin Link Retry Count
- dspuPuAdminLinkRetryCount 1.3.6.1.4.1.9.9.24.1.4.1.1.11 (defined in CISCO-DSPU-MIB)
Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU. - Cisco DSPU Pu Operation Link Retry Count
- dspuPuOperLinkRetryCount 1.3.6.1.4.1.9.9.24.1.4.2.1.11 (defined in CISCO-DSPU-MIB)
Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU.
