WINS-MIB

WINS-MIB Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the WINS-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the WINS-MIB .

OID list for WINS-MIB

parWinsStartTime
Wins start time
parLastPScvTime
Most recent date and time at which planned scavenging took place. Planned scavenging happens at intervals specified in the registry. Scavenging involves changing owned non-refreshed entries to the released state. Further, replicas may be changed to tomb ...
parLastATScvTime
Most recent data and time at which scavenging as a result of administrative action took place
parLastTombScvTime
Most recent data and time at which replica tombstone scavenging took place
parLastVerifyScvTime
Most recent data and time at which revalidation of old active replicas took place
parLastPRplTime
Most recent data and time at which planned replication took place. Planned replication happens at intervals specified in the registry
parLastATRplTime
Most recent data and time at which administrator triggered replication took place.
parLastNTRplTime
Most recent data and time at which network triggered replication took place. Network triggered replication happens as a result of an update notification message from a remote WINS
parLastACTRplTime
Most recent data and time at which address change triggered replication took place. Address change triggered replication happens when the address of an owned name changes due to a new registration
parLastInitDbTime
Most recent data and time at which the local database was populated statically from one or more data files
parLastCounterResetTime
Most recent data and time at which the local counters were initialized to zero
parWinsTotalNoOfReg
This variable indicates the number of registrations received
parWinsTotalNoOfQueries
This variable indicates the number of queries received
parWinsTotalNoOfRel
This variable indicates the number of releases received
parWinsTotalNoOfSuccRel
This variable indicates the number of releases that succeeded
parWinsTotalNoOfFailRel
This variable indicates the number of releases that failed
parWinsTotalNoOfSuccQueries
This variable indicates the number of queries that succeeded
parWinsTotalNoOfFailQueries
This variable indicates the number of queries that failed
parRefreshInterval
This variable indicates the refresh interval. Unit is in milliseconds
parTombstoneInterval
This variable indicates the tombstone interval, Unit is in milliseconds
parTombstoneTimeout
This variable indicates the tombstone timeout. Unit is in milliseconds
parVerifyInterval
This variable indicates the verify interval Unit is in milliseconds.
parVersCounterStartValLowWord
This variable indicates the low word of the version counter that WINS should start with
parVersCounterStartValHighWord
This variable indicates the High word of the version counter that WINS should start with
parRplOnlyWCnfPnrs
This variable indicates whether or not replication should be done with non-configures pnrs. If not set to zero, replication will be done only with partners listed in the registry (except when an update notification comes in)
parStaticDataInit
This variable indicates whether Static data should be read in at initialization and reconfiguration time. Update of any mib variable in the parameters group constitutes reconfigurations
parLogFlag
This variable indicates whether logging should be done. Default behaviour is to do logging
parLogFileName
This variable gives the path to the log file
parBackupDirPath
This variable gives the path to the backup dir
parDoBackupOnTerm
This variable specifies whether WINS should do backup on termination. Setting it 1 holds no meaning unless parBackupDirPath is set also
parMigrateOn
This variable specifies whether static records in the wins database should be treated as dynamic records during conflicts with new dynamic registrations.
dfDatafilesTable
A list of datafiles specified under the Datafiles key in the registry. These files are used for statically initialization of the WINS database
dfDatafileEntry
data file name
dfDatafileIndex
Used for indexing entries in the datafiles table. It has no other use
dfDatafileName
Name of the datafile to use for static initialization
pullInitTime
This variable indicates whether pull should be done at WINS invocation and at reconfiguration. If any pull group's mib variable is set, that constitutes reconfiguration
pullCommRetryCount
This variable gives the retry count in case of comm failure when doing pull replication. This is the max. number of retries that will be done at the interval specified for the Partner before WINS will stop for a certain number (canned) of replication time ...
pullPnrTable
A list of Partners with which pull replication needs to be done
pPullPnrEntry
This is the row corresponding to a partner
pullPnrAdd
This is the address of the remote WINS partner
pullPnrSpTime
This variable gives the specific time at which pull replication should occur
pullPnrTimeInterval
This variable gives the time interval for pull replication
pullPnrMemberPrec
This is the precedence to be given to members of the special group pulled from the WINS. Note: the precedence of locally registered members of a special group is more than any replicas pulled in
pullPnrNoOfSuccRpls
The number of times replication was successful with the WINS after invocation or reset of counters
pullPnrNoOfCommFails
The number of times replication was unsuccessful with the WINS due to comm. failure (after invocation or reset of counters
pullPnrVersNoLowWord
The low word of the highest vers. no found in records owned by this WINS.
pullPnrVersNoHighWord
The high word of the highest vers. no found in records owned by this WINS.
pushInitTime
This variable indicates whether a push (i.e. notification message) should be done at invocation.
pushRplOnAddChg
This variable indicates whether a notification message should be sent when address changes
pushPnrTable
A list of WINS Partners with which push replication is to be initiated
pushPnrEntry
This is the row corresponding to the WINS pnr
pushPnrAdd
Address of the WINS partner
pushPnrUpdateCount
This variable indicates the # of updates that should result in a push message
cmdPullTrigger
This variable when set will cause the WINS to pull from the remote WINS identified by the IpAddress
cmdPushTrigger
This variable when set will cause the WINS to push a notification message to the remote WINS identified by the IpAddress
cmdDeleteWins
This variable when set will cause all information pertaining to a WINS (data records, context information to be deleted from the local WINS. Use this only when owner-address mapping table is getting to near capacity. NOTE: deletion of all information pert ...
cmdDoScavenging
This variable when set will cause WINS to do scavenging.
cmdDoStaticInit
When set WINS will do static initialization using the file specified as the value. If 0 is specified, WINS will do static initialization using the files specified in the registry (can be read-written using Datafile table
cmdNoOfWrkThds
Sets the number of worker threads in WINS
cmdPriorityClass
Set the priority class of WINS to normal or high
cmdResetCounters
Reset the counters. Value is ignored
cmdDeleteDbRecs
This variable when set will cause all date records pertaining to a WINS to be deleted from the local WINS. Note: Only data records are deleted.
cmdDRPopulateTable
This variable can set to retrieve records of a WINS whose Ip address is provided. When set the table is populated right-away
cmdDRDataRecordsTable
This is the table that stores the data records The records are sorted lexicographically by name Note: the table is cached (to save on overhead on WINS) To repopulate the table, set cmdDRDataRecordsTable mib var
cmdDRRecordEntry
was specified when CmdDRRecordsTable was set
cmdDRRecordName
Name in the record
cmdDRRecordAddress
Address(es) of the record. If the record is a multihomed record or a special group, the addresses are returned sequentially in pairs. Each pair is comprised of the address of the owner wins followed by the address of the machine (multihomed)/member (spec ...
cmdDRRecordType
Type of the record
cmdDRRecordPersistenceType
Persistence type of the record
cmdDRRecordState
State of the record.
cmdWinsVersNoLowWord
The low word of the version number counter of the WINS
cmdWinsVersNoHighWord
The high word of the version number counter of the WINS

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list