XYLAN-FRAME-RELAY-MIB

XYLAN-FRAME-RELAY-MIB Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the XYLAN-FRAME-RELAY-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the XYLAN-FRAME-RELAY-MIB .

OID list for XYLAN-FRAME-RELAY-MIB

frxPortTable
A table of port layer status and parameter information for the UNI's physical interface.
frxPortEntry
An entry in the table, containing information about the physical layer of a UNI interface.
frxPortSlotIndex
A unique value which identifies this HSM board slot.
frxPortPortIndex
A unique value which identifies this WSM submodule port.
frxPortDescription
A description for this Frame Relay port.
frxPortDefaultBridgingVLAN
The default VLAN for new PVCs that have not been configured for the Bridging Service. A value of zero(0) indicates that unconfigured VCs will not perform a bridging service and will discard all bridged format frames received or transmitted. A non-zero val ...
frxPortDefaultBridgingServiceNumber
If non-zero, this is the unique service number which unconfigured Bridging Virtual Circuits are added to if frxPortDefaultBridgingVLAN is non zero (set to a VLAN ID) and frxPortDefaultBridgingGrouping is set to groupVCsIntoOneVport. This allows an unconf ...
frxPortDefaultRoutingVLAN
The default VLAN for new PVCs that have not been configured for a routing Service. A value of zero(0) indicates that unconfigured VCs will not perform a routing service and will discard all routed format frames received or transmitted. A non-zero value in ...
frxPortDefaultCompressionAdminStatus
This object controls whether or not an unconfigured virtual circuit will attempt (enable) or not attempt (disable) to negotiate for compression.
frxPortDefaultCompressionPRetryTime
The default P-Retry-Time for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9. This object controls the default value for P-Retry-Time for an unconfigured (dynamic) virtual circuit. This obje ...
frxPortDefaultCompressionPRetryCount
The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object controls the default value for P-Retry-Count for an unconfigured (dynamic) virtual circuit. This obj ...
frxPortDefaultBridgingMode
The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY
frxVcControlTable
A table of Frame Relay virtual circuit configuration and control information.
frxVcControlEntry
An entry in the table, containing information about the Frame Relay virtual circuit statistics.
frxVcControlSlotIndex
A unique value which identifies this HSM board slot.
frxVcControlPortIndex
A unique value which identifies this WSM submodule port.
frxVcControlDlci
A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit.
frxVcControlCompressionAdminStatus
This object controls whether or not the virtual circuit will attempt (enable) or not attemp (disable) to negotiate for compression. The current state of compression for the virtual circuit is indicated in frxVcControlCompressionOperStatus
frxVcControlCompressionOperPhase
This object reports the current phase (state) of compression for this virtual circuit if the Compression Admin Status is set to enable. If the compression Admin status is set to disabled, then this object will report as disabled. Otherwise the value refl ...
frxVcControlCompressionPRetryTime
The default P-Retry-Time for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9. This object represents the time in seconds between retransmission of Data Compression Negotiation Control messag ...
frxVcControlCompressionPRetryCount
The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object represents the number of retries before giving up on the negotiation phase and not running compressi ...
frxVcControlBridgingInUse
Determine for NMS Manager to see whether VC is already in-use. 1=InUse, 0=Free.
frxServiceTable
A table of Frame Relay services status and parameter information.
frxServiceEntry
An entry in the table, containing information about the Frame Relay services.
frxServiceSlotIndex
A unique value which identifies this HSM board slot.
frxServicePortIndex
A unique value which identifies this WSM submodule port.
frxServiceNumber
The unique service number for this particular slot/port.
frxServiceTableEntryType
The type of table entry for this Frame Relay Serivce. A static entry is one that is stored in non-volatile memory. A dynamic entry is one that is automatically created for an unconfigured virtual circuit based on the the type of service (bridging or routi ...
frxServiceDescription
A description for this Frame Relay service.
frxServiceType
The service type.
frxServiceOperStatus
The service operational status.
frxServiceAdminStatus
The service adminstration status.
frxServiceVirtualCircuits
The virtual circuits for this service. Interpret this as a 16 bit field per connection: Trunking 1, Bridging 1..255, IP 1..255.
frxServiceVlans
The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, Bridging 1, IP 1
frxServiceBridgingMode
The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY
frxVcStatsTable
A table of Frame Relay virtual circuit statistics information.
frxVcStatsEntry
An entry in the table, containing information about the Frame Relay virtual circuit statistics.
frxVcStatsSlotIndex
A unique value which identifies this HSM board slot.
frxVcStatsPortIndex
A unique value which identifies this WSM submodule port.
frxVcStatsDlci
A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit.
frxVcStatsTxIPOctets
The total number of transmitted octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit.
frxVcStatsTxIPFrames
The total number of transmitted routed IP format frames on this virtual circuit.
frxVcStatsRxIPOctets
The total number of received octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit.
frxVcStatsRxIPFrames
The total number of received routed IP format frames on this virtual circuit.
frxVcStatsTxIPXOctets
The total number of transmitted octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit.
frxVcStatsTxIPXFrames
The total number of transmitted routed IPX format frames on this virtual circuit.
frxVcStatsRxIPXOctets
The total number of received octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit.
frxVcStatsRxIPXFrames
The total number of received routed IPX format frames on this virtual circuit.
frxVcStatsTxBPDUOctets
The total number of transmitted octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit.
frxVcStatsTxBPDUFrames
The total number of transmitted BPDU frames on this virtual circuit.
frxVcStatsRxBPDUOctets
The total number of received octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit.
frxVcStatsRxBPDUFrames
The total number of received BPDU frames on this virtual circuit.
frxVcStatsTxEthernetOctets
The total number of transmitted octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit.
frxVcStatsTxEthernetFrames
The total number of transmitted bridged 802.3 format frames on this virtual circuit.
frxVcStatsRxEthernetOctets
The total number of received octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit.
frxVcStatsRxEthernetFrames
The total number of received bridged 802.3 format frames on this virtual circuit.
frxVcStatsTx8025Octets
The total number of transmitted octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit.
frxVcStatsTx8025Frames
The total number of transmitted 8025 frames on this virtual circuit.
frxVcStatsRx8025Octets
The total number of received octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit.
frxVcStatsRx8025Frames
The total number of received 8025 frames on this virtual circuit.
frxVcStatsTxFDDIOctets
The total number of transmitted octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit.
frxVcStatsTxFDDIFrames
The total number of transmitted FDDI frames on this virtual circuit.
frxVcStatsRxFDDIOctets
The total number of received octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit.
frxVcStatsRxFDDIFrames
The total number of received FDDI frames on this virtual circuit.
frxVcStatsTxCompressedOctets
The total number of transmitted octets (including the Frame Relay Header field) within compressed format frames on this virtual circuit.
frxVcStatsTxCompressedFrames
The total number of transmitted compressed format frames on this virtual circuit.
frxVcStatsRxCompressedOctets
The total number of received octets (including the Frame Relay Header field) within compressed format frames on this virtual circuit.
frxVcStatsRxCompressedFrames
The total number of received compressed format frames on this virtual circuit.
frxVcStatsTxPrecompressedOctets
The total number of octets (including the Frame Relay Header field) prior to compression of data for transmission within compressed format frames on this virtual circuit.
frxVcStatsRxDecompressedOctets
The total number of octets (including the Frame Relay Header field) after decompression of data received within compressed format frames on this virtual circuit.
frxVcStatsRxCompressedDiscards
The total number of received compressed format frames on this virtual circuit that were discarded due to error or lost frames (e.g. out of sequence, decompression errors, etc.)

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list