Cisco Pseudo Wire Vc Mpls Inbound Entry

1.3.6.1.4.1.9.10.107.1.5.1

A row in this table represents a link between PW VCs (that require MPLS tunnels) and MPLS tunnel for packets arriving from the PSN. This table is indexed by the set of indexes used to identify the VC - cpwVcIndex and an additional index enabling multiple rows for the same VC index. Note that the first entry for each VC can be indexed by cpwVcMplsOutboundIndex equal zero without a need for retrieval of cpwVcMplsInboundIndexNext. An entry is created in this table either automatically by the local agent or created manually by the operator in cases that strict mode is required. Note that the control messages contain VC ID and VC type, which together with the remote IP address identify the cpwVcIndex in the local node. This table points to the appropriate MPLS MIB. In the case of MPLS-TE, the 4 variables relevant to the indexing of a TE MPLS tunnel are set as in Srinivasan, et al, . In case of non-TE MPLS tunnel (an outer tunnel label assigned by LDP or manually) the table points to the XC entry in the MPLS-LSR-MIB as in Srinivasan, et al, . Each VC may have multiple rows in this tables if protection is available at the outer tunnel level, each row may be of different type except for VC only, on which only rows with ifIndex of the port are allowed. INDEX { cpwVcIndex, cpwVcMplsInboundIndex } ::= { cpwVcMplsInboundTable 1 } CpwVcMplsInboundEntry ::= SEQUENCE { cpwVcMplsInboundIndex Unsigned32, cpwVcMplsInboundLsrXcIndex Unsigned32, cpwVcMplsInboundTunnelIndex MplsTunnelIndex, cpwVcMplsInboundTunnelInstance MplsTunnelInstanceIndex, cpwVcMplsInboundTunnelLclLSR MplsLsrIdentifier, cpwVcMplsInboundTunnelPeerLSR MplsLsrIdentifier, cpwVcMplsInboundIfIndex InterfaceIndexOrZero, cpwVcMplsInboundRowStatus RowStatus, cpwVcMplsInboundStorageType StorageType } SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION Arbitrary index for enabling multiple rows per VC in this table. Next available free index can be retrieved using cpwVcMplsInboundIndexNext. ::= { cpwVcMplsInboundEntry 1 } SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION If the outer label is defined in the MPL-LSR-MIB, i.e. set by LDP or manually, this object points to the XC index of the outer tunnel. Otherwise, it is set to zero.