caqAclHitCountVlansHigh - Cisco Access Control List QoS Acl Hit Count Vlans High - CISCO-CATOS-ACL-QOS-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

caqAclHitCountVlansHigh

Cisco Access Control List QoS Acl Hit Count Vlans High
1.3.6.1.4.1.9.9.179.1.9.2

A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 2048 to 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if ACL hit count feature is enabled then the bit corresponding to that VLAN is set to '1'. Note that if the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value zero. A NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated when the vlanAclHitCount(0) bit is set to '1' in the caqAclFeatureCpb object.

Back to CISCO-CATOS-ACL-QOS-MIB MIB page.

IPHost Network monitor allows you to monitor caqAclHitCountVlansHigh on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

MIBs list