IPHost Monitor – MIBs for Cisco ONS 15540 ESP

The Cisco ONS 15540 Extended Service Platform (ESP) is a dense wavelength division multiplexing (DWDM) optical transport platform aimed at the Metro DWDM Enterprise market.

SNMP monitoring is widely used by IPHost clients and makes your network monitoring tasks simple.With the IPHost SNMP tool, you can monitor any SNMP objects of theCisco ONS 15540 ESP.You can select a variable to monitor using the built-in MIB browser that provides youwith all variables supported by theCisco ONS 15540 ESP, their current values and descriptions taken from MIBs.

List of Mibs
for SNMP management and monitoring ofCisco ONS 15540 ESP

  • CISCO-APS-EXT-MIB
  • CISCO-APS-MIB
  • CISCO-CDL-MIB
    MIB module for management of the Cisco Discovery Protocol in Cisco devices.
  • CISCO-CDP-MIB
    MIB module for management of the Cisco Discovery Protocol in Cisco devices.
  • CISCO-CONFIG-COPY-MIB
    “This MIB facilitates writing of configuration filesof an SNMP Agent running Cisco’s IOS in the following ways:to and from the net, copying running configurations to startupconfigurations and vice-versa, and copying a configuration(running or startup) to and from the local IOS file system.”
  • CISCO-CONFIG-MAN-MIB
    The MIB represents a model of configuration data that exists in various locations
  • CISCO-ENTITY-ALARM-MIB
    This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the system, including chassis, slots, modules, ports, power supplies, and fans.
  • CISCO-ENTITY-ASSET-MIB
    This MIB module allows you to monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table.
  • CISCO-ENTITY-EXT-MIB
    This MIB is an extension of the ENTITY-MIB specified in RFC2737.
  • CISCO-ENTITY-FRU-CONTROL-MIB
    “The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitorand configure operational status ofField Replaceable Units (FRUs) and other managablephysical entities of the system listed in theEntity-MIB (RFC 2737) entPhysicalTable.FRUs include assemblies such as power supplies, fans,processor modules, interface modules, etc.”
  • CISCO-ENTITY-SENSOR-MIB
    The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable.
  • CISCO-ENTITY-VENDORTYPE-OID-MIB
    This module defines the object identifiers that are assigned to various components on Cisco products, which are used by the entPhysicalTable of the ENTITY-MIB to uniquely identify the type of each physical entry.
  • CISCO-FLASH-MIB
    Flash operations MIB module.
  • CISCO-IF-THRESHOLD-MIB
  • CISCO-IMAGE-MIB
    Router image MIB which identifies the capabilities and characteristics of the image.
  • CISCO-IP-STAT-MIB
    This MIB incorporates objects to provide support for the Cisco IP statistics as implemented in command interfaces.
  • CISCO-MEMORY-POOL-MIB
    MIB module for monitoring memory pools.
  • CISCO-METRO-PHY-MIB
  • CISCO-NTP-MIB
    This MIB module defines a MIB which provides mechanisms to monitor an NTP server.
  • CISCO-OPTICAL-IF-CROSS-CONNECT-MIB
  • CISCO-OPTICAL-IF-EXTN-MIB
  • CISCO-OPTICAL-MONITOR-MIB
  • CISCO-OPTICAL-PATCH-MIB
  • CISCO-OSCP-MIB
  • CISCO-PING-MIB
    This MIB module contains a modified description of the ciscoPingAddress object.
  • CISCO-PROCESS-MIB
    MIB module to describe active system processes.
  • CISCO-PRODUCTS-MIB
    This MIB module defines the object identifiers that are assigned to various hardware platforms, and hence are returned as values for sysObjectID.
  • CISCO-RF-MIB
    This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem.
  • CISCO-RF-SUPPLEMENTAL-MIB
    This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redundant CPU platforms.
  • CISCO-SMI
    The Structure of Management Information for the Cisco enterprise.
  • CISCO-SYSLOG-MIB
    MIB module to describe and store the system messages generated by the IOS.
  • CISCO-TC
    This MIB module defines textual conventions used throughout Cisco enterprise MIBs.
  • CISCO-TCP-MIB
    An extension to the IETF MIB module for managing TCP implementations.
  • ENTITY-MIB
    MIB module for representing multiple logical entities supported by a single SNMP agent.
  • EXPRESSION-MIB
    MIB module for defining expressions of MIB objects for network management purposes.
  • IANA-ADDRESS-FAMILY-NUMBERS-MIB
    This MIB module defines the AddressFamilyNumbers textual convention.
  • IANAifType-MIB
    This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II’s ifTable.
  • IF-MIB
    MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021.
  • OLD-CISCO-SYS-MIB
  • OLD-CISCO-TS-MIB
  • PTOPO-MIB
  • RFC1213-MIB
    This RFC defines the second version of the Management Information Base (MIB-II) for use with network management protocols in TCP/IP-based internets.
  • RFC1253-MIB
  • RFC1398-MIB
    This RFC defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing ethernet-like objects.
  • RFC1595-MIB
  • RMON-MIB
    This Management Information Base contains standard information relating to Remote Network Monitoring.
  • RS-232-MIB
    MIB module for RS-232-like hardware devices.
  • SNMPv2-MIB
    This MIB module defines MIB objects for SNMPv2 entities.
  • SNMPv2-SMI
    This MIB module defines MIB objects for the Structure of Management Information (SMI).
  • SNMPv2-TC
    This MIB module defines MIB objects for SNMPv2 Textual Conventions.
  • TCP-MIB
    MIB module for managing & monitoring TCP implementations.
  • UDP-MIB
    MIB module for managing UDP implementations.

You can startCisco ONS 15540 ESPmonitoring using free 30-day trial version of IPHost Network Monitor right now.Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost’s SNMP monitor can communicate and interact with any SNMP-enabled device.

Free 30-day trial version of IPHost Network Monitor is available. During your trial you can get support by e-mail, please use contact form to send all your inquiries on IPHost Network Monitor features and purchase.

Windows Interface Screenshot Web Interface Screenshot
Windows Interface Screenshot Web Interface Screenshot
 

Download the free trial of IPHost Network Monitor and start to monitor your network and vital applications in a few minutes.



IPHost Network Monitor 5.4 build 14538 of April 21, 2023. File size: 111MB


Comments are closed.