report_interval - SNMP monitoring

MIBs list

SNMP OIDs - report_interval

The objects described here can be monitored with the IPHost Network Monitor. You can start SNMP monitoring using free 30-day trial version of IPHost right now.

OID list for report interval

Enterasys Dvmrp Ext If Report Interval
etsysDvmrpExtIfReportInterval 1.3.6.1.4.1.5624.1.2.69.1.2.1.1.7 (defined in enterasys-dvmrp-ext-mib)
The transmit frequency of DVMRP Report messages on this interface. A value of 0 represents an infinite interval and periodic DVMRP Report messages SHOULD not be sent on this interface.
Alcatel Dvmrp Route Report Interval
alaDvmrpRouteReportInterval 1.3.6.1.4.1.6486.800.1.2.1.10.7.1.1.1.2 (defined in ALCATEL-IND1-DVMRP-MIB)
The Route Report Interval determines how often a router will send its complete routing tables to neighboring routers running DVMRP.
Cajun Dvmrp Rte Report Interval
cjnDvmrpRteReportInterval 1.3.6.1.4.1.52.4.43.2.13.1.6 (defined in DVMRP-PRIVATE-MIB)
The DVMRP Route report interval - default to 60.
sys Snoop Report Forward Interval
sysSnoopReportForwardInterval 1.3.6.1.4.1.207.1.4.167.105.2.2.1.7 (defined in AT-GS950-8-MIB)
This timer is used when proxy-reporting is disabled,the switch then has to suppress multiple IGMPv2/ MLDv1 report messages for the same group from being forwarded to the router. This is the interval (in seconds) within which report messages for the same multicast group will not be forwarded. The 'ReportForwardTimer' is per multicast group. This timer is started as soon as a report message for that group is forwarded out. Within this 'ReportForwardInterval' if another report for the same group arrives, that report will not be forwarded.
token Ring Port Soft Error Report Interval
tokenRingPortSoftErrReportInterval 1.3.6.1.4.1.9.5.1.11.14.1.2 (defined in CISCO-STACK-MIB)
station connected to this port will be monitored for excessive soft error reports. If a station reports more than tokenRingPortSoftErrThreshold errors within the sampling period a trap will be issued to the management station(s). Setting a value of 0 will cause no traps to be sent for this port.

MIBs list