AT-GS950-8-MIB

AT-GS950-8-MIB Download

MIBs list

Private MIB for AT-GS950 Series Switches

IPHost Network Monitor offer an easy way of SNMP monitoring your Allied Telesis network devices, Firewalls, Repeaters.

OID list for AT-GS950-8-MIB

sysSnmpEngineID
An SNMP engine's administratively-unique identifier. In a simple agent, this value is always that agent's own snmpEngineID value. The value can also take the value of the snmpEngineID of a remote SNMP engine with which this user can communicate.
snmpGlobalState
This object is for enabling or disabling SNMP Community function.
sysSnmpUserTable
sysSnmpUserEntry
sysSnmpUserName
A human readable string rsysresenting the name of the user. This is the (User-based Security) Model dependent security ID.
sysSnmpUserAuthProtocol
An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be authenticated, and if so, the type of authentication protocol which is used. An instance of this object is created concurrently wit ...
sysSnmpUserPrivProtocol
An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be protected from disclosure, and if so, the type of privacy protocol which is used. An instance of this object is created concurrentl ...
sysSnmpUserStatus
The status of this concsystual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is 'notReady'. In particular, a newly created row for a user who employs aut ...
sysSnmpGroupTable
sysSnmpGroupEntry
sysSnmpSecurityModel
A human readable string rsysresenting the name of the user. This is the (User-based Security) Model dsysendent security ID.
sysSnmpSecurityName
A human readable string rsysresenting the name of the user. This is the (User-based Security) Model dsysendent security ID.
sysSnmpGroupName
The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an ...
sysSnmpGroupStatus
The status of this concsystual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is 'notReady'. In particular, a newly created row for a user who employs aut ...
sysSnmpGroupAccessTable
sysSnmpGroupAccessEntry
sysSnmpaccessGroupIndex
The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an ...
sysSnmpaccessSecurityModel
In order to gain the access rights allowed by this concsystual row, this securityModel must be in use.
sysSnmpaccessSecurityLevel
The minimum level of security required in order to gain the access rights allowed by this concsystual row. A securityLevel of noAuthNoPriv is less than authNoPriv which in turn is less than authPriv. If multiple entries are equally indexed excsyst for th ...
sysSnmpaccessReadViewName
The value of an instance of this object identifies the MIB view of the SNMP context to which this concsystual row authorizes read access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of th ...
sysSnmpaccessWriteViewName
The value of an instance of this object identifies the MIB view of the SNMP context to which this concsystual row authorizes write access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of t ...
sysSnmpaccessNotifyViewName
The value of an instance of this object identifies the MIB view of the SNMP context to which this concsystual row authorizes access for notifications. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the i ...
sysSnmpaccessStatus
The status of this concsystual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this concs ...
sysSnmpViewTreeTable
sysSnmpViewTreeEntry
sysSnmpviewTreeName
The human readable name for a family of view subtrees.
sysSnmpviewTreeSubtree
The MIB subtree which when combined with the corresponding instance of vacmViewTreeFamilyMask defines a family of view subtrees.
sysSnmpviewTreeMask
The bit mask which, in combination with the corresponding instance of vacmViewTreeFamilySubtree, defines a family of view subtrees. Each bit of this bit mask corresponds to a sub-identifier of vacmViewTreeFamilySubtree, with the most significant bit of th ...
sysSnmpviewTreeType
Indicates whether the corresponding instances of vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask define a family of view subtrees which is included in or excluded from the MIB view.
sysSnmpviewTreeStatus
The status of this concsystual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this concs ...
sysSnmpCommunityTable
sysSnmpCommunityEntry
sysSnmpsnmpCommunityIndex
The unique index value of a row in this table.
sysSnmpsnmpCommunityName
The unique index value of a row in this table.
sysSnmpsnmpCommunityPolicy
A human readable string rsysresenting the corresponding value of snmpCommunityName in a Security Model indsysendent format.
sysSnmpsnmpCommunityStatus
The status of this concsystual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpCom ...
sysSnmpTrapManagerTable
sysSnmpTrapManagerEntry
sysSnmpsnmpTrapManagerName
The locally arbitrary, but unique identifier associated with this snmpNotifyEntry.
sysSnmpsnmpTrapManagerAddress
This object contains a transport address. The format of this address dsysends on the value of the snmpTargetAddrTDomain object.
sysSnmpsnmpTrapManagerSecurityLevel
The Level of Security to be used when generating SNMP messages using this entry.
sysSnmpsnmpTrapManagerStatus
The status of this concsystual row in the SnmpTrapManagerTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpT ...
sysRadiusExtServerTable
The (concsystual) table listing the RADIUS servers with which the client shares a secret.
sysRadiusExtServerEntry
An entry (concsystual row) rsysresenting a RADIUS server with which the client shares a secret.
sysRadiusExtServerIndex
The RADIUS server with whom the client interacts.
sysRadiusExtServerAddress
The IP address of the RADIUS server referred to in this table entry.
sysRadiusExtServerSharedSecret
The secret string which is shared between Server and Client
sysRadiusExtServerResponseTime
The maximum time within which the server has to respond for a request from the client
sysRadiusExtServerMaximumRetransmission
The allowed maximum no. of trials to be tried by a client to get response from the server for a request
sysRadiusExtServerAuthPortNum
The UDP port the client is using to send authentication requests to this server.
sysRadiusExtServerEntryStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this obj ...
sysRadiusExtServerAccPort
The UDP port the client is using to send accounting requests to this server.
ifMaxInterfaces
Specifies the maximum number of interfaces that can be present in the system.
ifMaxPhysInterfaces
Specifies the maximum number of physical interfaces that can be present in the system.
ifAvailableIndex
Shows an ifIndex which is available for creation of any new virtual (non-physical) interface in the system. This ifIndex value can be used for creation of interfaces in the ifMainTable or any media-specif MIB. For creation of physical interfaces, any free ...
ifMainTable
A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a proprietary extension to the standard ifTable and ifXTable. The index to this table has the seman ...
ifMainEntry
An entry containing management information applicable to a particular interface.
ifMainIndex
A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.
ifMainType
The type/protocol of interface. Specification of the object is mandatory for all interfaces. This value should be specified after the row creation in the ifMainTable and before setting any other object in this table. Once the type is specified, it cannot ...
ifMainMtu
The MTU for the interface as shown to the higher interface sub-layer (this value should not include the encapsulation or header added by the interface). If IP is operating over the interface, then this value indicates the IP MTU over this interface. For c ...
ifMainAdminStatus
The desired state of the interface. This object can be set only when the ifMainRowStatus of the interface is active. This object has the semantics of the ifAdminStatus of the standard ifTable. The testing(3) state indicates that no operational packets can ...
ifMainOperStatus
The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported currently. If ifMainAdminStatus is down (2) then ifMainOperStatus would be down (2). If ifMainAdminStat ...
ifMainEncapType
The encapsulation type to be used over the interface. For Ethernet interfaces, the default encapsulation type is ethernetV2(8). The other possible encapsulation is llcSnap(6). If other(1) is specified then an automatic encapsulation type learning method i ...
ifMainBrgPortType
The Bridge port type of this specified externally accessible port. Bridge Port type can be specified only for switch ports and not for router ports. providerNetworkPort - Port Connected to a single Provider. SVLAN Classification is based on only the PVID ...
ifMainRowStatus
A RowStatus variable for addition, deletion and in-activation of the interfaces. Specification of the object is mandatory for all interfaces. When the status is active, the interface is created and ready to use in the respective protocol modules. When the ...
ifIpTable
A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over the network interfaces in the system. This table is a extension to the ifMainTable. The index to ...
ifIpEntry
An entry containing management information applicable to a particular interface over which IP is operating.
ifIpAddrAllocMethod
The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only for PPP and MLPPP interfaces which support obtaining of IP addresses through negotiation. The dynamic(3) option takes an IP address dynamicall ...
ifIpAddr
Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PPP link - not under MP, MP interface and X.25 VC). If the interface is not a network interface th ...
ifIpSubnetMask
Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accsysted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured f ...
ifIpBroadcastAddr
Specifies the IP broadcast address for this interface. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accsysted. If not specified, this object takes the default value based on the class o ...
ifIpForwardingEnable
Specifies whether IP forwarding is enable on this interface. Disabling IP forwarding on an interface will result in packets which are to be forwarded on that interface being dropped and ICMP error messages being generated for the packets.
ifIpAddrAllocProtocol
Specifies the protocol to be used to obtain IP address for this interface. This object is valid only when ifIpAddrAllocMethod is set to dynamic (3). Currently rarp (1) option is not supported. The assigned value will be effective only when the interface ...
ifIvrTable
A list of all the interfaces in the system with IVR related configurations. This table is an extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable.
ifIvrEntry
An entry containing IVR-related information applicable to a interface.
ifIvrBridgedIface
Indicates if this interface is a Bridged interface or not. A value of 'TRUE' indicates that this interface is a Bridged interface and is capable of performing bridging of packets through this interface. A value of 'FALSE' indicates that this interface is ...
ifSetMgmtVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. ...
ifResetMgmtVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanId value in that octet. ...
ifSecondaryIpAddressTable
A list of secondary IP addresses configured over the interfaces registered with IP. This table is a extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. Secondary IpAddress configuration should not ...
ifSecondaryIpAddressEntry
An entry contains the information associated with the secondary(additional) ip address configured to a particular interface.
ifSecondaryIpAddress
Specifies the Secondary IP address associated with the interface
ifSecondaryIpSubnetMask
Specifies the IP Subnet Mask associted with the secondary ip address configuration. The value should be specified only for network interfaces and any valid VLSM is accsysted. If not specified, this object takes the default subnet mask value based on the c ...
ifSecondaryIpBroadcastAddr
Specifies the IP broadcast address associated with the configured secondary IP address. The value should be specified only for network interfaces and any valid broadcast address based on a valid VLSM is accsysted. If not specified, this object takes the d ...
ifSecondaryIpRowStatus
This object is used to manage creation and deletion of rows in this table.
sysRmonEnableStatus
This object defines the sysRmonenable flag for sysRmon
sysRmonHwStatsSupp
This object defines the flag for whether HW supports Etherstatistics or not
sysRmonHwHistorySupp
This object defines the enabled HWhistorysupp flag for sysRmon
sysRmonHwAlarmSupp
This object defines the enabled HWAlarmsupp flag for sysRmon
sysRmonHwEventSupp
This object defines the enabled HWEvent flag for sysRmon
sysLaSystemControl
Start or shutdown Link Aggregation Module in the system When set as 'start',resources required by Link aggregation module are allocated & Link aggregation module starts running. When shutdown, all resources used by Link aggregation module will be released ...
sysLaStatus
Sets the Link Aggregation Module administrative status as enabled or disabled. The module can be enabled only when this object is set to 'enabled'.
sysLaTraceOption
This object is used to enable Trace Statements in Link Aggregation Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, rsysresents a particular level of Trace. The mapping between the bit positions & t ...
sysLaMaxPortsPerPortChannel
This Object specifies the maximun number of ports that can attach to a port-channel
sysLaMaxPortChannels
This Object specifies the maximum number of Port-channels Present in the system
sysLaOperStatus
This read only objects gives actual status of the Link Aggregation Module (Operational status of module). When Module is enabled Link Aggregation protocol starts functioning. When the module is disabled all the dynamically allocated memory will be freed a ...
sysLaActorSystemID
A 6-octet read-write MAC address value used as a unique identifier for the System.
sysLaPortChannelTable
A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection polic ...
sysLaPortChannelEntry
There is one entry in this table for each created port-channel port
sysLaPortChannelIfIndex
The ifIndex of the port-channel(Aggregator's interface index).
sysLaPortChannelGroup
An index that uniquely identifies an entry in this table.
sysLaPortChannelAdminMacAddress
This object is used for configuring MacAddress that is to be used by the port-channel when sysLaPortChannelMacSelection is force. WARNING:The value configured should not conflict with the MAC address of system ports that are not configured to select this ...
sysLaPortChannelMacSelection
Indicates the MAC address selection method for for the port-channel. Dynamic - Port-channel MAC address is chosen as MAC address of an active port in the PortChannel. Force - Port-channel MAC address configured through sysLaPortChannelAdminMacAddress is ...
sysLaPortChannelMode
Current Operating Channel Mode of the port Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). disable(3) - channeling is disabled.
sysLaPortChannelPortCount
The number of ports actually configured to the port-channel
sysLaPortChannelActivePortCount
This object will give the number of ports that are attached to the port-channel and actively carrying data traffic on the link.
sysLaPortChannelSelectionPolicy
Link selection policy to be used by the port-channel. The selection policies based on the IP address can be set if and only if hardware is present and supported.
sysLaPortChannelDefaultPortIndex
The ifIndex of the default port that gets attached to the aggregator. A value of 0 means there is no default port for this port-channel. If this object is set to 0, it will remove the current default port from the aggregator. To change the default port of ...
sysLaPortTable
A table that contains objects to set the port lacp mode of dot3adAggPortTable.
sysLaPortEntry
Each entry in this table is for each physical port that participates in Link Aggregation which can be either aggregatable or individual. This table is indexed by the PortIndex.
sysLaPortIndex
The ifIndex of the port
sysLaPortMode
This object is used to enable LACP, disable LACP or manually aggregate a port
sysLaPortBundleState
This read-only object is used to display the port state in aggregation upInBndl(0) - The port is operationally up and actively takes part in aggregation. standby(1) - The port is capable of joining in aggregation group, when any of the ports in ...
sysLaPortActorResetAdminState
A string of 8 bits,corresponding to the administrative values of Actor_State as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout),the third bit corres ...
sysLaPortAggregateWaitTime
Duration of the port to attach to the PortChannel.
sysLaPortPartnerResetAdminState
A string of 8 bits,corresponding to the administrative values of Partner_State.The first bit corresponds to bit 0 of Partner_State (LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation),the fou ...
sysLaPortActorAdminPort
The port number used as dot3adAggPortActorPort and is communicated in LACPDUs as the Actor_Port.
sysLaPortRestoreMtu
The Restore mtu stores the original MTU of the port before getting aggregated to port channel. A SET on the MIB object is not allowed for SNMP users. This operation is allowed only during config-save-restore operation , during system initialization.
sysLaPortSelectAggregator
This read-only object is used to display whether the port participates in dynamic aggregator selection. The default will be static aggregation selection. static(0) - The port is involved only in static aggregation. i.e. the port can be a member of on ...
sysPnacSystemControl
Starts or shutdowns PNAC Module in the system. When set as 'start',resources required by PNAC module are allocated & PNAC module starts running. When shutdown, all resources used by PNAC module will be released to the system.
sysPnacAuthenticServer
This object is used to configure for the choice of local or remote Authentication Server to be used by the Authenticator for its authentication services.
sysPnacNasId
This object is the Network Access Server Identifier to be presented before the remote Authentication Server.
sysPnacPaePortTable
A table of system level information for each port supported by the EnterprisePNAC. An entry appears in this table for each port of this system. This table is an extension of dot1xPaePortTable of IEEE 802.1x MIB.
sysPnacPaePortEntry
Configuration as port based or MAC based authentication and Supplicant count on a port. Index to this table is same as that of the dot1xPaePortTable, which is the InterfaceIndex.
sysPnacPaePortNumber
The port number associated with this port.
sysPnacPaePortStatus
The value of the combined Port status.
sysPnacPaeMultiAuthEnable
This object indicates dot1x multi hsot is enabled or disabled.
sysPnacPaeProtocolMode
This object indicates mode is 802.1x or mac based.
sysPnacPaePiggybackMode
This object indicates piggyback mode is enabled or disabled.
sysPnacPaeVlanAssignment
This object indicates vlan assignment is enabled or disabled.
sysPnacPaeSecureVlan
This object indicates Secure vlan is enabled or disabled.
sysPnacModuleOperStatus
This read only objects gives actual status of the PNAC Module (Operational status of module). When Module is enabled PNAC protocol starts functioning. When the module is disabled all the dynamically allocated memory will be freed and PNAC protocol stops f ...
sysPnacASUserConfigTable
This table contains authentication related User configuration information maintained by PNAC local Authentication Server.
sysPnacASUserConfigEntry
Each entry contains User name, Password, Authentication protocol used, Authenticated session timeout and Access ports list of the User seeking authentication.
sysPnacASUserConfigUserName
Identity of the User seeking authentication. A string of not more than 20 printable characters.
sysPnacASUserConfigPassword
The secret Password of the User. A string of not more than 20 printable characters. When read, this always returns a String of length zero.
sysPnacASUserConfigAuthProtocol
The Authentication protocol supported for the User.
sysPnacASUserConfigAuthTimeout
The time in seconds after which the Authentication offerred to the User ceases. Maximum value of the object can be 7200 seconds. When the object value is 0, the ReAuthPeriod of the Authenticator port is used by Authenticator.
sysPnacASUserConfigPortList
The complete set of ports of Authenticator to which the User is allowed or denied access, on the basis of setting of 'sysPnacASUserConfigPermission' object.
sysPnacASUserConfigPermission
For the set of ports indicated by 'sysPnacASUserConfigPortList' object, the User is allowed access when this object is set 'allow' and is denied access when this object is set 'deny'.
sysPnacASUserConfigDynamicVlanID
Dynamic Vlan ID is assigned by Switch in local mode
sysPnacASUserConfigRowStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this obj ...
sysPnacGuestVlanTable
This table contains authentication session information associated with each Guest vlan while Authenticator operates in port based authentication mode.
sysPnacGuestVlanEntry
Guest Vlan ID assign with each port.
sysPnacPaePortNo
The port number associated with this port.
sysPnacGuestVlanId
specify the guest vlan tag.0 for non exiting
sysSwitchName
System name used for identification of the device. The following characters are allowed to input. 0 ~ 9 / a ~ z / A ~ Z Special character: ( ) A!V + _ = .
sysHardwareVersion
Version number of the Hardware.
sysFirmwareVersion
Version number of the Firmware.
sysDefaultIpAddrCfgMode
Specifies the means by which the default interface in the device gets the IP address. If 'manual' mode is selected, the default interface takes the 'sysDefaultIpAddr' configured in the system. If 'dynamic' mode is selected, the default interface gets the ...
sysDefaultIpAddr
Default IP Address of the system. This IP address, if modified, will take effect only when the configuration is stored & restored.
sysDefaultIpSubnetMask
IP subnet mask for the default IP address. This subnet mask, if modified, will take effect only when the configuration is stored & restored.
sysRestart
This object allows the user to restart the Switch (i.e)the entire switch will operationally go down and start again. Setting a value of 'true' causes the switch to be restarted. When the switch operationally goes down, configuration save operation is i ...
sysConfigSaveOption
Specifies whether the configurations of the switch has to be saved or not. The value 'noSave' specifies that the configurations need not be saved. The value 'flashSave' specifies that the configurations need to be saved in flash in the specified file name ...
sysConfigSaveIpAddr
IP Address of the remote system to which the switch configurations have to be saved. This object is valid only if 'sysConfigSaveOption' is chosen to be 'remoteSave'.
sysConfigSaveFileName
Name of the file in which the switch configurations are to be saved. This object is valid only if 'sysConfigSaveOption' is chosen to be 'flashSave' or 'remoteSave'.
sysInitiateConfigSave
When set as 'true' switch configurations save operation is initiated. As soon as the configuration save operation is completed, the value of this object reverts back to 'false'. All the configurations made via the three interfaces viz. -> commandline inte ...
sysConfigSaveStatus
Status of configuration save operation.
sysConfigRestoreOption
Specifies whether the switch configurations have to be restored or not. The value 'noRestore' specifies that the switch configurations need not be restored when the system is restarted. The value 'restore' specifies that the configurations need to be rest ...
sysRemoteConfigRestoreIpAddr
IP Address of the remote system from where the switch configurations have to be downloaded to the 'Startup Configuration File' in the flash.
sysConfigRestoreFileName
The configuration file name in the remote system which has to be downloaded to the 'Startup Configuration File' and set this name to 'Startup Configuration Restire File Name' in the flash.
sysInitiateRemoteConfigRestore
When set as 'true', the switch configurations will be downloaded from the specified remote system to the 'Startup Configuration File' in the flash. As soon as the configuration download operation is completed, the value of this object reverts back to 'fal ...
sysConfigRestoreStatus
The status of the switch configuration restore operation.
sysDlFirmwareFromIp
The Ip Address of machine from where the firmware has to be downloaded.
sysDlFirmwareName
The firmware name which is to be downloaded to the switch.
sysInitiateDlFirmware
Initiates the firmware Download operation.
sysLoggingOption
The option specifies whether the debug logging messages is to be sent to console or to a file(system buffer) in the system.
sysUploadLogFileToIp
The Ip address of TFTP server to which the log file is to be uploaded.
sysLogFileName
The file name to be used for uploading the logs to the remote system.
sysInitiateUlLogFile
Initiates uploading of log file to the specified IP address in 'sysUploadLogFileToIp'. The logs will be uploaded and saved in a file using the file name which was specified in 'sysLogFileName'.
sysSysContact
The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.
sysSysLocation
The physical location of this node (e.g., `telsyshone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
sysLoginAuthentication
The mechanism by which the user login to access the GUI for configuration has to be authenticated. Authentication is done either locally or in the remote side through a RADIUS Server.
sysSwitchBaseMacAddress
Ethernet address (base address) of the Switch. This base Mac Address, if modified, will take effect only when the Switch is restarted.
sysSwitchDate
The date is display in the switch in the format, Hours:Minutes:Seconds Day Month Year e.g 19:10:31 11 08 2005 01-12 Month - beginning from January to December The railway time 00 to 24 hours can be displayed. The Display of the date is in the format , W ...
sysHttpPort
The port to be used by the hosts/PC to configure ISS using the Web Interface The HTTP server must be disabled before this configuration is done
sysHttpStatus
This object is for enabling or disabling HTTP in the system.
sysDefaultVlanId
The Default VLAN Identifier to be used at system startup. The VLAN Module creates this vlan as the default vlan. The Default VLAN Identifier, if modified, will take effect only when the switch is restarted
sysWebAutoTimeoutInterval
This time interval to be used at counting time seconds to logout web interface automatically.
sysCliAutoTimeoutInterval
This time interval to be used at counting time seconds to logout command interface automatically.
sysCpuPolicerStatus
This object is for enabling or disabling cpu policer in the system.
sysLedEcoModeStatus
This object is for enabling or disabling LED ECO mode in the system.
sysPowerSavingEnable
This object is for enabling or disabling powersaving in the system.
sysDhcpAutoConfiguration
This object is for enabling or disabling DHCP auto configuration in the system.
sysAsyVLANEnable
This object is for set asyvlan to ivl or svl in the system.
issCosEnable
This object is for enabling or disabling COS in the system.
sysTrapEnable
This object is for enabling or disabling Trap in the system.
sysFDResetStateEnable
Enable/Disable Factory Default Reset function. The Factory Default Reset function is used to enable or disable the push button and reset function on the device. When the user wants to disable reset function that must be configure a password to lock it. On ...
sysFDRInputPw
Input a password first and then the sysFDResetStateEnable can work correctly.
sysConfigCtrlTable
A table to control device features like egress traffic control, stats collection, etc. either for the entire switch or for each interface in the switch.
sysConfigCtrlEntry
An entry appears in this table for each interface in the system. In addition to that an entry with index '0' is created in this table by default. If 'sysConfigCtrlStatus' of the entry '0' is made 'valid', then global control is chosen and the values again ...
sysConfigCtrlIndex
Interface index of the port for which the configuration in this entry applies. If any configuration is made in this table for the index '0', that configuration will be considered as global configuration and is applicable for all the interfaces of the swit ...
sysConfigCtrlEgressStatus
Controls the transmission of egress traffic over this interface. This value for entry '0' controls the egress traffic over all interfaces.
sysConfigCtrlStatsCollection
Enables or disables statistics collection for this interface. This value for entry '0' controls the stats collection for all interfaces.
sysConfigCtrlStatus
Speficies the validity of the entry. If the 'Config Control Status' for entry '0' is made 'valid', then global control is chosen in the system. It signifies that the values against entry '0' is applicable for all the interfaces of the switch. If the 'Conf ...
sysPortCtrlTable
A table to control the port specific parameters of the device like speed, duplex mode, etc.
sysPortCtrlEntry
An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
sysPortCtrlIndex
Interface index of the port for which the configuration in this entry applies.
sysPortCtrlMode
Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates with the port on the other end of the link for data transfer operation as 'full-duplex' or 'hal ...
sysPortCtrlDuplex
Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer
sysPortCtrlSpeed
Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer
sysPortCtrlFlowControl
Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware after negotiating with its peer
sysPortCtrlMDI
Sets the auto/mdi/mdix of the copper interface. Fiber media is not support.
issJumboFramePerPortEnable
Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame is disabled.
issJumboFramePerPortMtu
Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame MTU is 10000.
sysPortCtrlEAPPassThrough
Enables / disables dot1x EAP packet pass through for the interface. This object be configured only if the dot1x is disabled.
sysPortCtrlBPDUPassThrough
Enables / disables STP BPDU passthrough for the interface. This object be configured only if the RSTP/MSTP is disabled.
sysMirrorStatus
Provides control over the mirroring feature in the switch.
sysMirrorToPort
Specifies the port to which the mirrored traffic in the system is to be copied.
sysMirrorCtrlTable
A table to control mirroring features either for the entire switch or for each interface in the switch. Parameters in this table are valid only when the 'sysMirrorStatus' for the switch is not 'disabled'.
sysMirrorCtrlEntry
An entry appears in this table for each interface in the system.
sysMirrorCtrlIndex
The interface index of the port for which the configuration in this entry applies.
sysMirrorCtrlIngressMirroring
Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port.
sysMirrorCtrlEgressMirroring
Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port.
sysMirrorCtrlStatus
Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port.
sysIpAuthMgrStatus
Provides control over the Ip authentication management feature in the switch.
sysIpAuthMgrTable
A table to configure IP authorized managers in the system.
sysIpAuthMgrEntry
Each entry in this table rsysresents rules for particular IP authorized manager.
sysIpAuthMgrIpAddr
Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'.
sysIpAuthMgrIpMask
Specifies the IP address mask to be applied on sysIpAuthMgrIpAddr. Value 0.0.0.0 indicates mask for 'Any Manager'.
sysIpAuthMgrPortList
Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the 'PortList', the manager can access the ...
sysIpAuthMgrVlanList
Specifies the Vlan's in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured in the 'VlanList', the manager can reside only in the configured vlan set. Access to the switch ...
sysIpAuthMgrAllowedServices
Specifies the allowed services through which the authorized manager can access the switch. This object takes bit mask values. The services rsysresented by each bit position is as given below: With bit 0 being the Least Significant Bit, Bit0 --> snmp Bit1 ...
sysIpAuthMgrRowStatus
This object indicates the status of this entry.
sysLBDStateEnable
Enable/Disable Loopback detection function. The Loopback Detection function is used to detect the loop created by a specific port while Spanning Tree Protocol (STP) is not enabled in the network, especially when the down links are hubs or unmanaged switch ...
sysLBDInterval
Set a Loop detection Interval between 1 and 32767 seconds. The default is 2 seconds. This time interval to be used at counting time seconds to resend the CTP packet automatically.
sysLBDRecoverTime
This time interval to be used at counting time seconds to recover the disabled port automatically. The Loop Detection Recover Time can be set at 0 seconds, or 60 to 1000000 seconds. Entering 0 will disable the Loop Detection Recover Time. The default is 6 ...
sysLBDCtrlTable
A table to control Loopback detection features either for the entire switch or for each interface in the switch.
sysLBDCtrlEntry
An entry appears in this table for each interface in the system.
sysLBDCtrlIndex
The interface index of the port for which the configuration in this entry applies.
sysLBDPortStatus
Provides control to per port enable or disable the loopback detection function. Default is disabled.
sysLBDPortLoopStatus
The loop status for this port.
sysRateCtrlTable
A table to control the rate limiting parameters either for the entire switch or for each interface in the switch.
sysRateCtrlEntry
An entry appears in this table for each physical interface in the switch.
sysRateCtrlIndex
The interface index for which the configuration in this entry applies.
sysRateCtrlEgressLimitValue
Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also b ...
sysRateCtrlIngressLimitValue
Allows to configure the limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for receive packets on this interface. The value that can ...
sysStormCtrlTable
A table to control the rate limiting parameters either for the entire switch or for each interface in the switch.
sysStormCtrlEntry
An entry appears in this table for each physical interface in the switch.
sysStormCtrlIndex
The interface index for which the configuration in this entry applies.
sysDlfOnOff
This object indicates unknown unicast storm control function is enabled or disabled for device. When you enable unknown unicast storm control function, it will allowed you to limit the number of unknown unicast packets per second going through device.
sysBroadcastOnOff
This object indicates broadcast storm control function is enabled or disabled for device. When you enable broadcast storm control function, it will allowed you to limit the number of broadcast packets per second going through device.
sysMulticastOnOff
This object indicates multicast storm control function is enabled or disabled for device. When you enable multicast storm control function, it will allowed you to limit the number of multicast packets per second going through device.
sysStormCtrlThreshold
Allows to configure the limiting value for the maximum number of packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting on this interface. The value that can be set for this object is l ...
sysStormCtrlRowStatus
*This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this ob ...
sysUserAuthMgrTable
A table to configure user authorized managers in the system.
sysUserAuthMgrEntry
User tabale entry.
sysUserAuthMgrId
User ID used for administration of this device.
sysUserAuthMgrName
User Name used for administration of this device.
sysUserAuthMgrRowStatus
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this obj ...
sysDfsMultiFieldClfrTable
This table contains the Multifield Classifier details. (In WEB, it means Class Map)
sysDfsMultiFieldClfrEntry
An IP Multi-field Classifier entry describes a single MF Classifier.
sysDfsMultiFieldClfrId
An index that enumerates the MultiField Classifier filter.
sysDfsMultiFieldClfrFilterId
This Object specifies the ID of the filter the details of which should be matched against the incoming packet
sysDfsMultiFieldClfrFilterType
This Object specifies the type of the filter
sysDfsMultiFieldClfrStatus
The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active.
sysDfsClfrTable
This table contains the Multifield filter details. (In WEB, it means Policy Map)
sysDfsClfrEntry
An entry in the classifier table describes a single classifier. All classifier elements belonging to the same classifier use the classifier's sysDfsClfrId as part of their index.
sysDfsClfrId
An index that enumerates the classifier entries.
sysDfsClfrMFClfrId
The Object refers to a MultiField Classifier Id which is the index for the MF Classifier table. A Valid value of this object is not mandatory for the creation of an entry in this table. Need to map a Class ID (sysDfsMultiFieldClfrId)
sysDfsClfrInProActionId
The Object refers to a In Profile Action Id which is the index for the InProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table. Must the same with sysDfsClfrId.
sysDfsClfrOutProActionId
The Object refers to a Out Profile Action Id which is the index for the OutProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table. Must the same with sysDfsClfrId.
sysDfsClfrStatus
The status of this concsystual row. The objects sysDfsClfrInProActionId and sysDfsClfrOutProActionId can be modified at any time. But the other Objects can not be modified when the RowStatus is 'active'for the particular entry. when the Row Status is set ...
sysDfsInProfileActionTable
The Action Table enumerates actions that can be performed to a stream of traffic which is inprofile.For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue.
sysDfsInProfileActionEntry
Each entry in the action table allows description of one of action to be applied to traffic dsysending upon the treatment selected by sysDfsInProfileActionFlag.
sysDfsInProfileActionId
An index that enumerates the In Profile Action entries. Must be match the Policy ID.
sysDfsInProfileActionFlag
This Object defines the action to be performed on the packet, when the packets are found to be In profile. Default Priority = 1 (0x0001), TOS = 4 (0x0004), DSCP = 1024 (0x0400)
sysDfsInProfileActionNewPrio
This Object kesyss the new priority value in case the action selected by sysDfsInProfileActionFlag is to assign a new priority/COS value.
sysDfsInProfileActionDscp
This Object kesyss the new DSCP value in case the action selected by sysDfsInProfileActionFlag is to assign a new DSCP value.
sysDfsInProfileActionStatus
The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active.
sysDfsOutProfileActionTable
The Action Table enumerates actions that can be performed to a stream of traffic which is out of profile.For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue.
sysDfsOutProfileActionEntry
Each entry in the action table allows description of one of action to be applied to traffic dsysending upon the treatment selected by sysDfsOutProfileActionFlag.
sysDfsOutProfileActionId
An index that enumerates the Out Profile Action entries. Must the same with sysDfsClfrId.
sysDfsOutProfileActionFlag
This Object defines the action to be performed on the packet when the packets are found to be out of profile. Drop = 2 (0x0002) DSCP = 4 (0x0004)
sysDfsOutProfileActionMID
This Object kesyss the Meter Id to be added to the DataPath to which this particular OutProfileAction is applicable. Must the same with sysDfsClfrId.
sysDfsOutProfileActionStatus
The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active. The row comprises of an Meter Id which is an index to the Meter Table.
sysDfsMeterTable
The Meter Table has the number of token with it and refreshCount value for associated with the meter.
sysDfsMeterEntry
An entry in the Meter Table describing a single instance of a Metering Unit.
sysDfsMeterId
An index that enumerates the Meter entries. Must the same with sysDfsClfrId.
sysDfsMeterRefreshCount
This values specifies the number of tokens to be added to the meter bucket after each 8 usec. (Threshold kbps)
sysDfsMeterStatus
The status of this concsystual row. All writable objects in this row may be modified only when this rowstatus in not active.
sysDfsCoSqAlgorithmTable
A table containing the scheduling algorithm applied to a particular port.
sysDfsCoSqAlgorithmEntry
An entry in this table gives mapping of a Port to user defined scheduled algorithm.
sysDfsPortId
Port identifier to which scheduling algorightm is set.
sysDfsCoSqAlgorithm
Sets the packet scheduling algorithm for the port The default is strictPriority(1).
sysSyslogLogging
This object is for enabling or disabling syslog alert features in the system.
sysSyslogTimeStamp
This object is for enabling or disabling timestamp option. When enabled, the messages (log alert messages) will hold the time stamp information. When disabled, the time stamp information will not be carried with the messages sent to the log servers.
sysSyslogSysBuffers
Number of log buffers to be allocated in the system
sysSyslogClearLog
Clears the buffered logs. This object is set to 'false' by default. When set to 'True', the buffered logs will be cleared and the value of this object will become 'false' again.
sysSyslogConfigTable
A table for configuring module specific log levels.
sysSyslogConfigEntry
An entry containing logging level options for a particular module.
sysSyslogConfigModule
Specifies the module for which the log level option has to be configured.
sysSyslogConfigLogLevel
Specifies the log level option to be set for a specific module.
sysSyslogFacility
The Syslog standard facilities. The facility to be used when sending Syslog messages to this server.
sysSyslogLogSrvAddr
Specifies the syslog server IP to be used for remote logging. When configured, a new socket will be opened for this address. When the address is changed, the socket opened for the previous address will be closed and a new socket will be opened for this ad ...
sysPortSecurityTable
A list of port default priority Entries.
sysPortSecurityEntry
A list of port default priority priorities.
sysPortSecurityIndex
The interface index for which the configuration in this entry applies.
sysPortSecurityState
The security state on specific port.
sysPortSecurityMLA
The max. learning number of MAC entries on specific port
sysSslSecureHttpStatus
This object is for enabling or disabling secure HTTP in the system.
sysSslPort
This object is to configure the SSL port.
sysSslTrace
Set the trace level for SSL. BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packe ...
sysSslCipherList
This object is to configure the cipher-suites list. This field is a bit mask, setting a bit indicates that the corresponding cipher-list will be involved in the server authentication. BIT 0 - RSA-NULL-MD5 BIT 1 - RSA-NULL-SHA1 BIT 2 - RSA-DES-SHA1 BIT 3 - ...
sysSslDefaultCipherList
This object is to set the default cipher-suites list in 'sysSslCipherList'. Setting DefaultCipherList to TRUE would set the following cipher-list for authentication: - RSA_3DES_SHA1 - RSA_DES_SHA1 - RSA_EXP1024_DES_SHA1 The value of this object reverts ba ...
sysSshVersionCompatibility
This object is to configure the SSH version compatibility mode. When set to TRUE, both SSH version-1 and SSH Version-2 will be supported. When set to FALSE, SSH version-2 only will be supported. By default SSH version-2 is supported.
sysSshCipherList
This object is to configure the cipher-suites list. This object takes values as bit mask. Setting a bit indicates that the corresponding cipher-list will be used for Encryption. The value of each bit position is as given below with bit 0 being the least ...
sysSshMacList
This object is to configure the MAC-list. This object takes values as bit mask. Setting a bit indicates that the corresponding MAC-list will be used for authentication. The value of each bit position is as given below with bit 0 being the least significa ...
sysSshTrace
Set the trace level for SSH. BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packe ...
sysSshStatus
This object is for enabling or disabling ssh in the system.
sysSntpStatus
This object is for enabling or disabling SNTP Client feature in the system.
sysSntpPollInterval
The SNTP server polling interval in seconds.
sysSntpTimeSeconds
This object is for setting the system time in seconds from Epoch (00:00:00 UTC, January 1, 1970).
sysSntpPrimarySrvAddr
Specifies the primary SNTP server IP to be used for network time syncronization. When configured, a new socket will be opened for this address. When the address is changed, the socket opened for the previous address will be closed and a new socket will be ...
sysSntpSecondSrvAddr
Specifies the secondary SNTP server IP to be used for network time syncronization. If the primary SNTP server fail, the system will try secondary SNTP server. When configured, a new socket will be opened for this address. When the address is changed, the ...
sysSntpTimeZoneMappingIndex
This object is used for distinguishing areas in the same time zone.
sysSntpTzDSTStatus
This object is for enabling or disabling Time Zone Daylight Saving Time feature in the system.
sysSntpTzMinutesWest
Specifies the Time Zone Offset from GMT in +/- Minutes.
sysSntpTzDSTStartMon
The start month of Daylight Saving Time.
sysSntpTzDSTStartDay
The start day of Daylight Saving Time.
sysSntpTzDSTStartHour
The start hour of Daylight Saving Time.
sysSntpTzDSTStartMinute
The start minutes of Daylight Saving Time.
sysSntpTzDSTEndMon
The end month of Daylight Saving Time.
sysSntpTzDSTEndDay
The end day of Daylight Saving Time.
sysSntpTzDSTEndHour
The end hour of Daylight Saving Time.
sysSntpTzDSTEndMinute
The end minutes of Daylight Saving Time.
sysSntpTzDSTForwardOffset
The adjusted time of Daylight Saving Time.
sysDscpEnable
Enable / Disable DiffServ function
sysDscpType01
DiffServ Type 01 : IP ToS value = 0
sysDscpType02
DiffServ Type 02 : IP ToS value = 4
sysDscpType03
DiffServ Type 03 : IP ToS value = 8
sysDscpType04
DiffServ Type 04 : IP ToS value = 12
sysDscpType05
DiffServ Type 05 : IP ToS value = 16
sysDscpType06
DiffServ Type 06 : IP ToS value = 20
sysDscpType07
DiffServ Type 07 : IP ToS value = 24
sysDscpType08
DiffServ Type 08 : IP ToS value = 28
sysDscpType09
DiffServ Type 09 : IP ToS value = 32
sysDscpType10
DiffServ Type 10 : IP ToS value = 36
sysDscpType11
DiffServ Type 11 : IP ToS value = 40
sysDscpType12
DiffServ Type 12 : IP ToS value = 44
sysDscpType13
DiffServ Type 13 : IP ToS value = 48
sysDscpType14
DiffServ Type 14 : IP ToS value = 52
sysDscpType15
DiffServ Type 15 : IP ToS value = 56
sysDscpType16
DiffServ Type 16 : IP ToS value = 60
sysDscpType17
DiffServ Type 17 : IP ToS value = 64
sysDscpType18
DiffServ Type 18 : IP ToS value = 68
sysDscpType19
DiffServ Type 19 : IP ToS value = 72
sysDscpType20
DiffServ Type 20 : IP ToS value = 76
sysDscpType21
DiffServ Type 21 : IP ToS value = 80
sysDscpType22
DiffServ Type 22 : IP ToS value = 84
sysDscpType23
DiffServ Type 23 : IP ToS value = 88
sysDscpType24
DiffServ Type 24 : IP ToS value = 92
sysDscpType25
DiffServ Type 25 : IP ToS value = 96
sysDscpType26
DiffServ Type 26 : IP ToS value = 100
sysDscpType27
DiffServ Type 27 : IP ToS value = 104
sysDscpType28
DiffServ Type 28 : IP ToS value = 108
sysDscpType29
DiffServ Type 29 : IP ToS value = 112
sysDscpType30
DiffServ Type 30 : IP ToS value = 116
sysDscpType31
DiffServ Type 31 : IP ToS value = 120
sysDscpType32
DiffServ Type 32 : IP ToS value = 124
sysDscpType33
DiffServ Type 33 : IP ToS value = 128
sysDscpType34
DiffServ Type 34 : IP ToS value = 132
sysDscpType35
DiffServ Type 35 : IP ToS value = 136
sysDscpType36
DiffServ Type 36 : IP ToS value = 140
sysDscpType37
DiffServ Type 37 : IP ToS value = 144
sysDscpType38
DiffServ Type 38 : IP ToS value = 148
sysDscpType39
DiffServ Type 39 : IP ToS value = 152
sysDscpType40
DiffServ Type 40 : IP ToS value = 156
sysDscpType41
DiffServ Type 41 : IP ToS value = 160
sysDscpType42
DiffServ Type 42 : IP ToS value = 164
sysDscpType43
DiffServ Type 43 : IP ToS value = 168
sysDscpType44
DiffServ Type 44 : IP ToS value = 172
sysDscpType45
DiffServ Type 45 : IP ToS value = 176
sysDscpType46
DiffServ Type 46 : IP ToS value = 180
sysDscpType47
DiffServ Type 47 : IP ToS value = 184
sysDscpType48
DiffServ Type 48 : IP ToS value = 188
sysDscpType49
DiffServ Type 49 : IP ToS value = 192
sysDscpType50
DiffServ Type 50 : IP ToS value = 196
sysDscpType51
DiffServ Type 51 : IP ToS value = 200
sysDscpType52
DiffServ Type 52 : IP ToS value = 204
sysDscpType53
DiffServ Type 53 : IP ToS value = 208
sysDscpType54
DiffServ Type 54 : IP ToS value = 212
sysDscpType55
DiffServ Type 55 : IP ToS value = 216
sysDscpType56
DiffServ Type 56 : IP ToS value = 220
sysDscpType57
DiffServ Type 57 : IP ToS value = 224
sysDscpType58
DiffServ Type 58 : IP ToS value = 228
sysDscpType59
DiffServ Type 59 : IP ToS value = 232
sysDscpType60
DiffServ Type 60 : IP ToS value = 236
sysDscpType61
DiffServ Type 61 : IP ToS value = 240
sysDscpType62
DiffServ Type 62 : IP ToS value = 244
sysDscpType63
DiffServ Type 63 : IP ToS value = 248
sysDscpType64
DiffServ Type 64 : IP ToS value = 252
sysSnoopInstanceGlobalTable
This table contains multicast forwarding mode configuration for each instance running in the snooping switch
sysSnoopInstanceGlobalEntry
This table contains instance number and the multicast forwarding mode configuration for the particular instance
sysSnoopInstanceGlobalInstId
Instance ID pertaining to the global configuration entry.
sysSnoopInstanceGlobalSystemControl
Snooping module is shutdown or started through this object. When set to 'start', resources required by the Enterprise SNOOP module is allocated and the module starts running. When set to 'shutdown', all the resources are released back to the system and th ...
sysSnoopInstanceConfigTable
This table contains global configuration of snooping for each instance running in switch
sysSnoopInstanceConfigEntry
This table contains instance number, address type and the list of global configuration for the particular instance and address type
sysSnoopInstanceConfigInstId
Instance ID pertaining to the global configuration entry. Currently only one instance is supported so it is always 1
sysSnoopInetAddressType
Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping
sysSnoopStatus
Enables or disables IGMP/MLD snooping in the system. When set to 'enabled', the Enterprise IGS/MLDS module starts protocol operations. When set to 'disabled', the IGS/MLDS module stops performing protocol operations.
sysSnoopRouterPortPurgeInterval
This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInterval' seconds.When the timer expires, the learnt router port entry is purged. However if control ...
sysSnoopPortPurgeInterval
This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which rsysort has been received this timer runs for 'PortPurgeInterval' seconds. This timer will be restarted whenever a rsysort message is received from a ...
sysSnoopReportForwardInterval
This timer is used when proxy-reporting is disabled,the switch then has to suppress multiple IGMPv2/ MLDv1 report messages for the same group from being forwarded to the router. This is the interval (in seconds) within which report messages for the same m ...
sysSnoopRetryCount
When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attribute defines the maximum number of queries sent by the switch before deleting the port from the g ...
sysSnoopGrpQueryInterval
The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there are any intersted receivers. The switch will send 'sysSnoopRetryCount' queries before removing the port from the group m ...
sysSnoopReportFwdOnAllPorts
Snooping module will forward reports only on router ports by default, to enable forwarding on all other ports this object to provide a administrative control to forward the reports on all the member ports of the VLAN
sysSnoopOperStatus
The operational status of the IGS/MLDS protocol. The value enabled(1) indicates the IGS/MLDS module is currently enabled in the system. The value disable(1) indicates the IGS/MLDS module is currently disabled in the system.
sysSnoopSendQueryOnTopoChange
The Snooping Switch can be configured to send IGMP/MLD General queries on all non router ports when spanning tree topology change occurs in a network. If the spanning tree mode is RSTP, IGMP/MLD general queries will be sent on all the non router ports pre ...
sysSnoopQuerierQueryInterval
This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier. A switch should be configured as a querier for a VLAN only when there are no queriers in the network.
sysSnoopVlanMcastMacFwdTable
This table contains MAC based multicast forwarding information. This information is applicable only if the 'sysSnoopMcastForwardingMode' is set to 'macbased'
sysSnoopVlanMcastMacFwdEntry
This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded.
sysSnoopVlanMcastMacFwdInstId
Instance ID pertaining to the Multicast forwarding entry. Currently only one instance is supported so it is always 1
sysSnoopVlanMcastMacFwdVlanId
VLAN ID pertaining to the Multicast forwarding entry
sysSnoopVlanMcastMacFwdInetAddressType
InetAddressType pertaining to the Multicast forwarding entry
sysSnoopVlanMcastMacFwdGroupAddress
Multicast group MAC address.
sysSnoopVlanMcastMacFwdPortList
List of ports onto which the multicast data packets destined for this group will be forwarded.
sysSnoopVlanRouterTable
This table contains the list of ports through which a router, in a particular VLAN is reachable.
sysSnoopVlanRouterEntry
Contains the VLAN ID and list of ports on which routers are present in the VLAN.
sysSnoopVlanRouterInstId
Instance ID pertaining to the router port entry. Currently only one instance is supported so it is always 1
sysSnoopVlanRouterVlanId
VLAN ID of the ports through which router is reachable.
sysSnoopVlanRouterInetAddressType
It indicates whether the row belongs to IGMP / MLD snooping.
sysSnoopVlanRouterPortList
List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.
sysSnoopVlanFilterTable
This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system.
sysSnoopVlanFilterEntry
Contains snooping status , version and fast leave configuration for a specific VLAN.
sysSnoopVlanFilterInstId
Instance ID pertaining to VLAN filter table entry. Currently only one instance is supported so it is always 1
sysSnoopVlanFilterVlanId
VLAN ID for which snooping configuration is to be done.
sysSnoopVlanFilterInetAddressType
Indicates whether the row belongs to IGS/MLD snooping
sysSnoopVlanSnoopStatus
Enables or disables IGS/MLDS on that specific VLAN
sysSnoopVlanOperatingVersion
Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 2 i.e, V2(2) or MLD version 1 i.e, V1(1)
sysSnoopVlanFastLeave
Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message the switch checks if they are any interested receivers for the group by sending a group specific query before removing the port from the forwarding table. I ...
sysSnoopVlanQuerier
Indicates whether the switch is configured as a querier in the VLAN
sysSnoopVlanCfgQuerier
The snooping switch can be configured to send IGMP/MLD queries when IGMP/MLD routers are not present in the VLAN. When set to 'enabled' the switch will generate general query messages.
sysSnoopVlanQueryInterval
This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VLAN only when there are no queriers in the network.
sysSnoopVlanRtrPortList
List of ports which are configured statically as router ports
sysSnoopVlanRowStatus
The status of a row in the VLAN filter table. By 'sysSnoopVlanRowStatus' new entries can be created in the VLAN filter table and the existing entries can be removed from the VLAN filter table
sysSnoopStatsTable
This table contains snooping statistics maintained by the switch. The statistics are maintained on a per VLAN basis.
sysSnoopStatsEntry
Contains snooping statistics for a particular VLAN.
sysSnoopStatsInstId
Instance ID pertaining for the statistics entry. Currently only one instance is supported so it is always 1
sysSnoopStatsVlanId
VLAN ID for which snooping statistics are displayed
sysSnoopStatsInetAddressType
Indicates whether the statistics are for IGS/MLDS
sysSnoopStatsRxGenQueries
Provides the statistics of General Queries received by the snooping switch.
sysSnoopStatsRxGrpQueries
Provides the statistics of Group Specific Queries received by the snooping switch.
sysSnoopStatsRxAsmReports
Provides the statistics of IGMPv1/IGMPv2 Membership reports received by the snooping switch. In case of MLDS, it provides the statistics of MLDv1 membership reports.
sysSnoopStatsRxAsmLeaves
Provides the statistics of IGMPv2/MLDv1 Leave messages received by the snooping switch.
sysSnoopStatsTxGenQueries
Provides the statistics of General Queries transmitted by the snooping switch when it is act as a querier.
sysSnoopStatsTxGrpQueries
Provides the statistics of Group Specific Queries transmitted by the snooping switch.
sysSnoopStatsTxAsmReports
Provides the statistics of IGMPv1/IGMPv2 Membership reports transmitted by the snooping switch.
sysSnoopStatsTxAsmLeaves
Provides the statistics of IGMPv2/MLDv1 Leave messages transmitted by the snooping switch.
sysSnoopStatsDroppedPkts
Provides the number of erroneous IGMP/MLD packets dropped by the snooping switch due to failure in checksum calculation.
dot1dBaseTable
List of per Virtual Bridge Module Parameters.
dot1dBaseEntry
Virtual Bridge Rst Module Parameters.
dot1dBaseContextId
Virtual Bridge number
dot1dBaseBridgeAddress
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenate ...
dot1dBaseNumPorts
The number of ports controlled by this bridging entity.
dot1dBaseType
Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
dot1dBasePortTable
A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
dot1dBasePortEntry
A list of information for each port of the bridge.
dot1dBasePort
The port number of the port for which this entry contains bridge management information.
dot1dBasePortIfIndex
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.
dot1dBasePortCircuit
For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one wi ...
dot1dBasePortDelayExceededDiscards
The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
dot1dBasePortMtuExceededDiscards
The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
dot1dStpTable
Table of StpScalars per virtual bridge
dot1dStpEntry
Per bridge StpScalars
dot1dStpContextId
Virtual Bridge number
dot1dStpProtocolSpecification
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If enterprise versions of the IEEE Spannin ...
dot1dStpPriority
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
dot1dStpTimeSinceTopologyChange
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
dot1dStpTopChanges
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
dot1dStpDesignatedRoot
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
dot1dStpRootCost
The cost of the path to the root as seen from this bridge.
dot1dStpRootPort
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
dot1dStpMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
dot1dStpHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently u ...
dot1dStpHoldTime
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
dot1dStpForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which p ...
dot1dStpBridgeMaxAge
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1 ...
dot1dStpBridgeHelloTime
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole nu ...
dot1dStpBridgeForwardDelay
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802. ...
dot1dStpPortTable
A table that contains port-specific information for the Spanning Tree Protocol.
dot1dStpPortEntry
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
dot1dStpPort
The port number of the port for which this entry contains Spanning Tree Protocol management information.
dot1dStpPortPriority
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
dot1dStpPortState
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) s ...
dot1dStpPortEnable
The enabled/disabled status of the port.
dot1dStpPortPathCost
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
dot1dStpPortDesignatedRoot
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
dot1dStpPortDesignatedCost
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
dot1dStpPortDesignatedBridge
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
dot1dStpPortDesignatedPort
The Port Identifier of the port on the Designated Bridge for this port's segment.
dot1dStpPortForwardTransitions
The number of times this port has transitioned from the Learning state to the Forwarding state.
dot1dTpTable
Table of Tp per virtual bridge
dot1dTpEntry
Per bridge TpScalars
dot1dTpLearnedEntryDiscards
The total number of Forwarding Database entries, which have been or would have been learned, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database ...
dot1dTpAgingTime
The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
dot1dTpFdbTable
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. This table maintains ...
dot1dTpFdbEntry
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
dot1dTpFdbAddress
A unicast MAC address for which the bridge has forwarding and/or filtering information.
dot1dTpFdbPort
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that ...
dot1dTpFdbStatus
The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used ...
dot1dTpPortTable
A table that contains information about every port that is associated with this transparent bridge.
dot1dTpPortEntry
A list of information for each port of a transparent bridge.
dot1dTpPort
The port number of the port for which this entry contains Transparent bridging management information.
dot1dTpPortMaxInfo
The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
dot1dTpPortInFrames
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging fun ...
dot1dTpPortOutFrames
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridgin ...
dot1dTpPortInDiscards
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
dot1dStaticTable
A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The v ...
dot1dStaticEntry
Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
dot1dStaticAddress
The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.
dot1dStaticReceivePort
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other app ...
dot1dStaticRowStatus
This object indicates the status of the AllowedToGoTo PortList to which a frame with a specific unicast address will be flooded in the event that it has not been learned. To fill the AllowedToGoTo portlist, we have to set the rowstatus as 'NOT_IN_SERVICE' ...
dot1dStaticStatus
This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value ...
dot1dStaticAllowedToGoTable
A table containing the information of AllowedToGoTo ports for each static unicast entry. This table maintains context ID as one more index to support Multiple Instances.
dot1dStaticAllowedToGoEntry
Information about a port, Whether it is an AllowedToGoTo member or not.
dot1dStaticAllowedIsMember
Indicates whether the port is an allowedToGoTo member.
dot1dStpExtTable
Table of ExtStpScalars per Virtual Context.
dot1dStpExtEntry
Per Virtual Context Stp Scalars
dot1dStpVersion
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w. New valu ...
dot1dStpTxHoldCount
The value used by the Port Transmit state machine to limit the maximum transmission rate.
dot1dStpPathCostDefault
The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 80 ...
dot1dStpExtPortTable
A table that contains port-specific Rapid Spanning Tree information.
dot1dStpExtPortEntry
A list of Rapid Spanning Tree information maintained by each port.
dot1dStpPortProtocolMigration
When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.
dot1dStpPortAdminEdgePort
The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.
dot1dStpPortOperEdgePort
The operational value of the Edge Port parameter. The object is initialized to the value of dot1dStpPortAdminEdgePort and is set FALSE on reception of a BPDU.
dot1dStpPortAdminPointToPoint
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this por ...
dot1dStpPortOperPointToPoint
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the dot1dStp ...
dot1dExtBaseTable
List of dot1dExtBase group objects that can be configured per virtual context in the system.
dot1dExtBaseEntry
dot1dExtBase group objects per virtual context.
dot1dBridgeContextId
Identifies the virtual context.
dot1dDeviceCapabilities
Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
dot1dTrafficClassesEnabled
The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic.
dot1dGmrpStatus
The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all ...
dot1dPortCapabilitiesTable
A table that contains capabilities information about every port that is associated with this bridge.
dot1dPortCapabilitiesEntry
A set of capabilities information about this port indexed by dot1dBasePort.
dot1dPortCapabilities
Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB.
dot1dPortPriorityTable
A table that contains information about every port that is associated with this transparent bridge.
dot1dPortPriorityEntry
A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort.
dot1dPortDefaultUserPriority
The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.
dot1dPortNumTrafficClasses
The number of egress traffic classes supported on this port. This object may optionally be read-only. The value of this object MUST be retained across reinitializations of the management system.
dot1dUserPriorityRegenTable
A list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Traffic Class Table for each input port. This only has effect on media that support native User ...
dot1dUserPriorityRegenEntry
A mapping of incoming User Priority to a Regenerated User Priority.
dot1dUserPriority
The User Priority for a frame received on this port.
dot1dRegenUserPriority
The Regenerated User Priority that the incoming User Priority is mapped to for this port. The value of this object MUST be retained across reinitializations of the management system.
dot1dTrafficClassTable
A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).
dot1dTrafficClassEntry
User Priority to Traffic Class mapping.
dot1dTrafficClassPriority
The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet m ...
dot1dTrafficClass
The Traffic Class the received frame is mapped to.
dot1dPortOutboundAccessPriorityTable
A table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring.
dot1dPortOutboundAccessPriorityEntry
Regenerated User Priority to Outbound Access Priority mapping.
dot1dPortOutboundAccessPriority
The Outbound Access Priority the received frame is mapped to.
dot1dPortGarpTable
A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.
dot1dPortGarpEntry
GARP control information for a bridge port.
dot1dPortGarpJoinTime
The GARP Join time, in centiseconds.
dot1dPortGarpLeaveTime
The GARP Leave time, in centiseconds.
dot1dPortGarpLeaveAllTime
The GARP LeaveAll time, in centiseconds.
dot1dTpHCPortTable
A table that contains information about every high capacity port that is associated with this transparent bridge.
dot1dTpHCPortEntry
Statistics information for each high capacity port of a transparent bridge.
dot1dTpHCPortInFrames
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging fu ...
dot1dTpHCPortOutFrames
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridgin ...
dot1dTpHCPortInDiscards
Count of valid frames that have been received by this port from its segment which were discarded (i.e., filtered) by the Forwarding Process.
dot1dTpPortOverflowTable
A table that contains the most-significant bits of statistics counters for ports that are associated with this transparent bridge that are on high capacity interfaces, as defined in the conformance clauses for this table. This table is provided as a way t ...
dot1dTpPortOverflowEntry
The most significant bits of statistics counters for a high capacity interface of a transparent bridge. Each object is associated with a corresponding object in dot1dTpPortTable which indicates the least significant bits of the counter.
dot1dTpPortInOverflowFrames
The number of times the associated dot1dTpPortInFrames counter has overflowed.
dot1dTpPortOutOverflowFrames
The number of times the associated dot1dTpPortOutFrames counter has overflowed.
dot1dTpPortInOverflowDiscards
The number of times the associated dot1dTpPortInDiscards counter has overflowed.
dot1dExtCapGroup
A collection of objects indicating the optional capabilities of the device.
dot1dDeviceGmrpGroup
A collection of objects providing device-level control for the Multicast Filtering extended bridge services.
dot1dDevicePriorityGroup
A collection of objects providing device-level control for the Priority services.
dot1dDefaultPriorityGroup
A collection of objects defining the User Priority applicable to each port for media which do not support native User Priority.
dot1dRegenPriorityGroup
A collection of objects defining the User Priorities applicable to each port for media which support native User Priority.
dot1dPriorityGroup
A collection of objects defining the traffic classes within a bridge for each evaluated User Priority.
dot1dAccessPriorityGroup
A collection of objects defining the media dependent outbound access level for each priority.
dot1dPortGarpGroup
A collection of objects providing port level control and status information for GARP operation.
dot1dHCPortGroup
A collection of objects providing 64-bit statistics counters for high capacity bridge ports.
dot1dPortOverflowGroup
A collection of objects providing overflow statistics counters for high capacity bridge ports.
dot1qBaseTable
List of dot1qBase objects that can be configured per virtual context in the system.
dot1qBaseEntry
Virtual context dot1qBase objects.
dot1qVlanContextId
Identifies a virtual context.
dot1qVlanVersionNumber
The version number of IEEE 802.1Q that this device supports.
dot1qMaxVlanId
The maximum IEEE 802.1Q VLAN ID that this device supports.
dot1qMaxSupportedVlans
The maximum number of IEEE 802.1Q VLANs that this device supports.
dot1qNumVlans
The current number of IEEE 802.1Q VLANs that are configured in this device.
dot1qGvrpStatus
The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports and all ...
dot1qFdbTable
A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the dot1qVlanCurrentTable. This table maintains cont ...
dot1qFdbEntry
Information about a specific Filtering Database.
dot1qFdbId
The identity of this Filtering Database.
dot1qFdbDynamicCount
The current number of dynamic entries in this Filtering Database.
dot1qTpFdbTable
A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. This table maintains ...
dot1qTpFdbEntry
Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
dot1qTpFdbAddress
A unicast MAC address for which the device has forwarding and/or filtering information.
dot1qTpFdbPort
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that ...
dot1qTpFdbStatus
The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being us ...
dot1qTpFdbPw
Either the value '0', or the pseudowire number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the entry was learned via the layer2 port. Non-zero ...
dot1qStaticUnicastTable
A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific un ...
dot1qStaticUnicastEntry
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
dot1qStaticUnicastAddress
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
dot1qStaticUnicastReceivePort
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other ap ...
dot1qStaticUnicastRowStatus
This object indicates the status of the AllowedToGoTo PortList to which a frame with a specific unicast address will be flooded in the event that it has not been learned. To fill the AllowedToGoTo portlist, we have to set the rowstatus as 'NOT_IN_SERVICE' ...
dot1qStaticUnicastStatus
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. per ...
dot1qStaticAllowedToGoTable
A table containing the information of AllowedToGoTo ports for each static unicast entry. This table maintains context ID as one more index to support Multiple Instances.
dot1qStaticAllowedToGoEntry
Information about a port, Whether it is an AllowedToGoTo member or not.
dot1qStaticAllowedIsMember
Indicates whether the port is an allowedToGoTo member.
dot1qTpPort
The port number of the port for which this entry applies.
dot1qStaticMulticastTable
A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific ...
dot1qStaticMulticastEntry
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be f ...
dot1qStaticMulticastAddress
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
dot1qStaticMulticastReceivePort
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other ap ...
dot1qStaticMulticastRowStatus
This object indicates the status of the PortLists (Eggress, Forbidden) used in the static multicast table. To fill the eggress and forbidden portlist, we have to set the rowstatus as 'NOT_IN_SERVICE' and set the appropriate port in the dot1qForwardUnregPo ...
dot1qStaticMulticastStatus
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. per ...
dot1qStaticMcastPortTable
A table containing egress and forbidden ports for static multicast entry. This table maintains context ID as one more index to support Multiple Instance.
dot1qStaticMcastPortEntry
Information about a port, Whether it is a member or a forbidden member.
dot1qStaticMcastPort
Indicates whether the port is a member or a forbidden member in the static multicast entry. 'addMember' - to add the port in the egress member-list. 'addForbidden' - to add the port in the forbidden member-list. 'delMember' - to remove the port from ...
dot1qVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
dot1qVlanNumDeletesTable
Table containing number of VLAN deletions in the VLAN current database. This table maintains context ID as index to support Multiple Instances.
dot1qVlanNumDeletesEntry
Entry for a virtual context.
dot1qVlanNumDeletes
The number of times a VLAN entry has been deleted from the dot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2.
dot1qVlanCurrentTable
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. This table maintains context ID as one more index to su ...
dot1qVlanCurrentEntry
Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
dot1qVlanTimeMark
A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
dot1qVlanFdbId
The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. ...
dot1qVlanStatus
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is c ...
dot1qVlanCreationTime
The value of sysUpTime when this VLAN was created.
dot1qVlanEgressPortTable
A table containing the information of egress ports for each VLAN. This table maintains context ID as one more index to support Multiple Instance.
dot1qVlanEgressPortEntry
Information about a port, Whether it is a tagged or an untagged member.
dot1qVlanCurrentEgressPort
Indicates whether the port is a tagged or a untagged member in the VLAN. 'tagged' - to add the port in the tagged portlist. 'untagged' - to add the port in the untagged portlist.
dot1qVlanStaticTable
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset. This table maintains context ID as one more index to ...
dot1qVlanStaticEntry
Static information for a VLAN configured into the device by (local or network) management.
dot1qVlanStaticName
An administratively assigned string, which may be used to identify the VLAN.
dot1qVlanStaticRowStatus
This object indicates the status of this entry.
dot1qVlanStaticPortConfigTable
A table containing the information of tagged, untagged and forbidden ports for each VLAN. This table maintains context ID as one more index to support Multiple Instance.
dot1qVlanStaticPortConfigEntry
Forwarding information about a port, Whether it is a member or a forbidden member.
dot1qVlanStaticPort
Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addTagged' - to add the port in the tagged portlist. 'addUntagged' - to add the port in the untagged portlist. 'addForbidden' - to add the port ...
dot1qPortVlanTable
A table containing per port control and status information for VLAN configuration in the device.
dot1qPortVlanEntry
Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
dot1qPvid
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
dot1qPortAcceptableFrameTypes
When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for t ...
dot1qPortIngressFiltering
When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN independent BPDU frames, such as GVRP and ...
dot1qPortGvrpStatus
The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disable ...
dot1qPortGvrpFailedRegistrations
The total number of failed GVRP registrations, for any reason, on this port.
dot1qPortGvrpLastPduOrigin
The Source MAC Address of the last GVRP message received on this port.
dot1qPortRestrictedVlanRegistration
The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Admini ...
dot1sMstTable
List of per Virtual Context Mst Module Parameters.
dot1sMstEntry
Virtual Context Mst Module Parameters.
dot1sMstContextId
Identifies the Virtual Context.
dot1sSystemControl
The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all ports. The value shutdown (2) indicates that MST should be shutdown in the device on all ports. Al ...
dot1sModuleStatus
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object ...
dot1sMaxMstInstanceNumber
The Maximun number of spanning trees to be allowed. A User may limit the Number of Spanning Tree instance to be allowed in the Bridge.
dot1sNoOfMstiSupported
Indicates Maximum number of spanning tree Instances supported.
dot1sMaxHopCount
Indicates the Maximum Hop Count value. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
dot1sBrgAddress
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenate ...
dot1sCistRoot
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
dot1sCistRegionalRoot
The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by ...
dot1sCistRootCost
The Cost of the path to the CIST Root as seen from this bridge.
dot1sCistRegionalRootCost
The Cost of the path to the CIST Regional Root as seen from this bridge.
dot1sCistRootPort
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
dot1sCistBridgePriority
The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
dot1sCistBridgeMaxAge
The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
dot1sCistBridgeForwardDelay
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An a ...
dot1sCistHoldTime
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
dot1sCistMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
dot1sCistForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state ...
dot1sMstpUpCount
The number of times MSTP Module has been enabled.
dot1sMstpDownCount
The number of times MSTP Module has been disabled.
dot1sPathCostDefaultType
The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 80 ...
dot1sTrace
This object is used to enable Trace Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The mapping between the bit positions & the level ...
dot1sDebug
This object is used to enable Debug Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of Debug. The mapping between the bit positions & the leve ...
dot1sForceProtocolVersion
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and 'mstp( ...
dot1sTxHoldCount
The value used by the Port Transmit state machine to limit the maximum transmission rate.
dot1sMstiConfigIdSel
The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard.
dot1sMstiRegionName
The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address.
dot1sMstiRegionVersion
Version of the MST Region.
dot1sMstiConfigDigest
The Configuration Digest value for this Region.
dot1sBufferOverFlowCount
The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event.
dot1sMemAllocFailureCount
The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event.
dot1sRegionConfigChangeCount
The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event.
dot1sCistBridgeRoleSelectionSemState
Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context
dot1sCistTimeSinceTopologyChange
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context.
dot1sCistTopChanges
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context.
dot1sCistNewRootBridgeCount
The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event.
dot1sCistHelloTime
This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any port when it is the root of the spanning tree or trying to become so.
dot1sCistBridgeHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
dot1sCistDynamicPathcostCalculation
This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed, otherwise the link speed at the time of port creation is use ...
dot1sContextName
This object is used to identity the context-name.
dot1sMstiBridgeTable
Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances.
dot1sMstiBridgeEntry
Entry indicating the Bridge Information.
dot1sMstiInstanceIndex
Spanning Tree Instance to which the information belongs.
dot1sMstiBridgeRegionalRoot
MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node
dot1sMstiBridgePriority
The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
dot1sMstiRootCost
The Cost of the path to the MSTI Regional Root as seen by this bridge.
dot1sMstiRootPort
The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge.
dot1sMstiTimeSinceTopologyChange
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance.
dot1sMstiTopChanges
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance.
dot1sMstiNewRootBridgeCount
The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event.
dot1sMstiBridgeRoleSelectionSemState
Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge.
dot1sInstanceUpCount
The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event.
dot1sInstanceDownCount
The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event.
dot1sOldDesignatedRoot
The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node.
dot1sVlanInstanceMappingTable
This table contains one entry for each instance of MSTP. This table maintains context ID as one more index to support Multiple Instances.
dot1sVlanInstanceMappingEntry
A conceptual row containing the status of the MSTP instance.
dot1sInstanceIndex
An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.
dot1sMapVlanIndex
The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This object is used only for SET operation.GET Operation returns null values. If the VlanId to Insta ...
dot1sUnMapVlanIndex
The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get released.This object is used only for SET operation.GET Operation returns null values.
dot1sSetVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that o ...
dot1sResetVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that o ...
dot1sInstanceVlanMapped
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that o ...
dot1sInstanceVlanMapped2k
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of e ...
dot1sInstanceVlanMapped3k
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit o ...
dot1sInstanceVlanMapped4k
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of e ...
dot1sCistPortTable
This table contains Common Spanning Tree Port Information.
dot1sCistPortEntry
A list of information maintained by every port for Common Spanning tree.
dot1sCistPort
The Port number of the port for which this entry contains spanning tree information.
dot1sCistPortPathCost
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
dot1sCistPortPriority
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are set for Port Priority must be in steps of 16.
dot1sCistPortDesignatedRoot
The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted.
dot1sCistPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
dot1sCistPortDesignatedPort
The Port identifier of the port on the Designated Bridge for this port's segment.
dot1sCistPortAdminP2P
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this por ...
dot1sCistPortOperP2P
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the dot1sCis ...
dot1sCistPortAdminEdgeStatus
The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.
dot1sCistPortOperEdgeStatus
The operational value of the Edge Port parameter. The object is initialized to the value of dot1sCistPortAdminEdgeStatus and is set FALSE on reception of a BPDU.
dot1sCistPortProtocolMigration
Indicates the Protocol migration state of this Port. When operating in RSTP/MSTP (version >= 2) mode, writing TRUE(1) to this object forces this port to transmit MSTP BPDUs without instance information. Any other operation on this object has no effect and ...
dot1sCistPortState
Current state of the Port as defined by the Common spanning tree protocol.
dot1sCistForcePortState
Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's status in any of the MSTI contexts
dot1sCistPortForwardTransitions
Number of times this port has transitioned to the Forwarding State.
dot1sCistPortRxMstBpduCount
Number of MST BPDUs received on this port.
dot1sCistPortRxRstBpduCount
Number of RST BPDUs received on this port.
dot1sCistPortRxConfigBpduCount
Number of Configuration BPDUs received on this port.
dot1sCistPortRxTcnBpduCount
Number of TCN BPDUs received on this port.
dot1sCistPortTxMstBpduCount
Number of MST BPDUs Transmitted from this port.
dot1sCistPortTxRstBpduCount
Number of RST BPDUs Transmitted from this port.
dot1sCistPortTxConfigBpduCount
Number of Configuration BPDUs Transmitted from this port.
dot1sCistPortTxTcnBpduCount
Number of TCN BPDUs Transmitted from this port.
dot1sCistPortInvalidMstBpduRxCount
Number of Invalid MST BPDUs Received on this port.
dot1sCistPortInvalidRstBpduRxCount
Number of Invalid RST BPDUs Received on this port.
dot1sCistPortInvalidConfigBpduRxCount
Number of Invalid Configuration BPDUs Received on this port.
dot1sCistPortInvalidTcnBpduRxCount
Number of Invalid TCN BPDUs Received on this port.
dot1sCistPortTransmitSemState
Indicates current State of the Port Transmit state machine.
dot1sCistPortReceiveSemState
Indicates current State of the Port Receive state machine.
dot1sCistPortProtMigrationSemState
Indicates current State of the Port Protocol Migration State machine.
dot1sCistProtocolMigrationCount
The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/MSTP. A Trap is generated on the occurence of this event.
dot1sCistPortDesignatedCost
The path cost of the Designated Port of the segment connected to this port.
dot1sCistPortRegionalRoot
The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted.
dot1sCistPortRegionalPathCost
The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port.
dot1sCistSelectedPortRole
Selected Port Role of the port for this spanning tree instance.
dot1sCistCurrentPortRole
Current Port Role of the port for this spanning tree instance.
dot1sCistPortInfoSemState
Current state of the Port Information State Machine for this port in this spanning tree context.
dot1sCistPortRoleTransitionSemState
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
dot1sCistPortStateTransitionSemState
Current state of the Port State Transition State Machine for this port in this spanning tree context.
dot1sCistPortTopologyChangeSemState
Current state of the Topology Change State Machine for this port in this spanning tree context.
dot1sCistPortHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second.
dot1sCistPortOperVersion
This indicates whether the Port is operationally in the Mstp mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs.
dot1sCistPortEffectivePortState
The effective operational state of the port for CIST. This will TRUE only when the port is operationally up in the Interface level and Protocol level for CIST. This is will be set to False for all other times.
dot1sCistPortAutoEdgeStatus
This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled.
dot1sCistPortRestrictedRole
A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selecte ...
dot1sCistPortRestrictedTCN
A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This parameter should be FALSE by default. If set it can cause temporary loss of connectivity after cha ...
dot1sMstiPortTable
This table contains Spanning Tree Instance Specific Port Information.
dot1sMstiPortEntry
A list of information maintained by every port for each and every spanning tree instance.
dot1sMstiPort
The Port number of the port for which this entry contains spanning tree information.
dot1sMstiPortPathCost
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
dot1sMstiPortPriority
The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
dot1sMstiPortDesignatedRoot
The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted.
dot1sMstiPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
dot1sMstiPortDesignatedPort
The Port identifier of the port on the Designated Bridge for this port's segment.
dot1sMstiPortState
Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) state in another instance.
dot1sMstiForcePortState
Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if the 'dot1sCistForcePortState' is set to 'enabled' for this port
dot1sMstiPortForwardTransitions
Number of times this port has transitioned to the Forwarding State for specific instance.
dot1sMstiPortReceivedBPDUs
Number of BPDUs received by this port for this spanning tree instance.
dot1sMstiPortTransmittedBPDUs
Number of BPDUs transmitted on this port for this spanning tree instance.
dot1sMstiPortInvalidBPDUsRcvd
Number of Invalid BPDUs received on this Port for this spanning tree instance.
dot1sMstiPortDesignatedCost
The path cost of the Designated Port of the segment connected to this port.
dot1sMstiSelectedPortRole
Selected Port Role of the port for this spanning tree instance.
dot1sMstiCurrentPortRole
Current Port Role of the port for this spanning tree instance.
dot1sMstiPortInfoSemState
Current state of the Port Information State Machine for this port in this spanning tree context.
dot1sMstiPortRoleTransitionSemState
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
dot1sMstiPortStateTransitionSemState
Current state of the Port State Transition State Machine for this port in this spanning tree context.
dot1sMstiPortTopologyChangeSemState
Current state of the Topology Change State Machine for this port in this spanning tree context.
dot1sMstiPortEffectivePortState
The effective operational stae of the port for specific instance. This is will be TRUE only when the port is operationally up in the interface level and Protocol level for the specific instance. This is will be set to false at all other times.
dot1sMstSetGlobalTrapOption
This object is used to enable and disable MSTP traps for memory failure or buffer failure irrespective of the context in which the failure occurs. 0 - Traps are not enabled. 1 - Memory and buffer failure traps enabled
dot1sGlobalErrTrapType
Used within the Trap Notification PDU. It returns the following values none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure
dot1sMstTrapsControlTable
List of per virtual bridge Trap Control Info.
dot1sMstTrapsControlEntry
Virtual bridge TrapsControl information.
dot1sSetTraps
This object is used to enable and disable context-specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol up or down 2 - Exception Traps like port protocol migration or invalid packet rcvd in po ...
dot1sGenTrapType
Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN
dot1sPortTrapNotificationTable
This table is used to store the notification information occured in each of the port for protocol migration and invalid packet received. This table is maintained per virtual context in the system.
dot1sPortTrapNotificationEntry
This entry is used to store the notification information
dot1sPortTrapIndex
A unique value, greater than zero, indicating the Port number.
dot1sPortMigrationType
Port Protocol migration type occured in the port
dot1sPktErrType
Type of invalid packet received in each of the port
dot1sPktErrVal
Packet error value corresponding to the above type
dot1sPortRoleTrapNotificationTable
This table is used to store the notification information occured in each of the port for its role change. This table is maintained per virtual context in the system.
dot1sPortRoleTrapNotificationEntry
This entry is used to store the notification information
dot1sPortRoleType
Particular Role Selected for the Port
dot1sOldRoleType
Particular Role which is existing for the Port
dot1wRstTable
List of per virtual context RstModule Parameters
dot1wRstEntry
Virtual Bridge RstModule Parameters.
dot1wRstContextId
Identifies the Virtual Bridge Context.
dot1wSystemControl
The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP should be allocated and RSTP should be supported in the device on all ports. The value shutdown(2) in ...
dot1wModuleStatus
The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be enabled in the device on all the ports. A value of 'disabled'(2) indicates that ...
dot1wTraceOption
This object is used to enable Trace Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The mapping between the bit positions & the level ...
dot1wDebugOption
This object is used to enable Debug Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of Debug. The mapping between the bit positions & the leve ...
dot1wRstpUpCount
The number of times RSTP Module has been enabled.
dot1wRstpDownCount
The number of times RSTP Module has been disabled.
dot1wBufferFailureCount
The number of times buffer overflows/failures have occurred. A Trap is generated on the occurrence of this event.
dot1wMemAllocFailureCount
The number of times memory allocation failures have occurred. A Trap is generated on the occurrence of this event.
dot1wNewRootIdCount
The number of times this Bridge has detected a new Root in the topology. A Trap is generated on the occurrence of this event.
dot1wPortRoleSelSmState
This indicates the current state of the Port Role Selection State Machine. This object will hold the value 'initbridge' when the Port Role Selection state machine is in the INIT_BRIDGE state and the value of 'roleselection' when the state machine is in th ...
dot1wOldDesignatedRoot
The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node.
dot1wDynamicPathcostCalculation
This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed, otherwise the link speed at the time of port creation is use ...
dot1wContextName
This object is used to identity the context-name.
dot1wPortExtTable
This is a table that is an extension to the dot1dStpExtPortTable. This contains object(s) that are Port-based.
dot1wPortExtEntry
Each entry in this table is for each port present in the system. This table is indexed by the dot1wPort.
dot1wPort
A unique value, greater than zero, indicating the Port number.
dot1wPortRole
This indicates the current Port Role assumed by this Port.
dot1wPortOperVersion
This indicates whether the Port is operationally in the Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting RST BPDUs or Config/TCN BPDUs.
dot1wPortInfoSmState
This indicates the current state of the Port Information state machine. This object will hold the value 'disabled' when the Port Information state machine is in the DISABLED state, the value 'aged' when the state machine is in the AGED state, the value 'u ...
dot1wPortMigSmState
This indicates the current state of the Port Protocol Migration state machine. This object will hold the value 'checkingrstp' when the Protocol Migration state machine is in the CHECKING_RSTP state, the value 'selectingstp' when the state machine is in th ...
dot1wPortRoleTransSmState
This indicates the current state of the Port Role Transition state machine. This object will hold the value 'init' when the Port Role Transition state machine is in the INIT state, the value 'disableport' when the state machine is in the DISABLE_PORT stat ...
dot1wPortStateTransSmState
This indicates the current state of the Port State Transition state machine. This object will hold the value 'discarding' when the Port State Transition state machine is in the DISCARDING state, the value 'learning' when the state machine is in the LEARNI ...
dot1wPortTopoChSmState
This indicates the current state of the Topology Change state machine. This object will hold the value 'inactive' when the Topology Change state machine is in the INACTIVE state, the value 'learning' when the state machine is in the LEARNING state, the va ...
dot1wPortTxSmState
This indicates the current state of the Port Transmit state machine. This object will hold the value 'transmitinit' when the Port Transmit state machine is in the TRANSMIT_INIT state, the value 'transmitperiodic' when the state machine is in the TRANSMIT_ ...
dot1wPortRxRstBpduCount
The number of RST BPDUs that have been received on this Port.
dot1wPortRxConfigBpduCount
The number of Config BPDUs that have been received on this Port.
dot1wPortRxTcnBpduCount
The number of TCN BPDUs that have been received on this Port.
dot1wPortTxRstBpduCount
The number of RST BPDUs that have been transmitted by this Port.
dot1wPortTxConfigBpduCount
The number of Config BPDUs that have been transmitted by this Port.
dot1wPortTxTcnBpduCount
The number of TCN BPDUs that have been transmitted by this Port.
dot1wPortInvalidRstBpduRxCount
The number of invalid RSTP BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event.
dot1wPortInvalidConfigBpduRxCount
The number of invalid Configuration BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event.
dot1wPortInvalidTcnBpduRxCount
The number of invalid TCN BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event.
dot1wPortProtocolMigrationCount
The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP. A Trap is generated on the occurrence of this event.
dot1wPortEffectivePortState
The effective Operational state of the port. This object will be set to TRUE only when the port is operationally up in the interface manager and the force Port State for this port and specified port state is enabled. Otherwise this object is set to FALSE.
dot1wPortAutoEdge
This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled.
dot1wPortRestrictedRole
A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selecte ...
dot1wPortRestrictedTCN
A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This parameter should be FALSE by default. If set it can cause temporary loss of connectivity after cha ...
dot1wSetGlobalTraps
This object is used to enable and disable RSTP traps for memory failure or buffer failure irrespective of the context in which the failure occurs. 0 - Traps are not enabled. 1 - Memory and buffer failure traps enabled
dot1wGlobalErrTrapType
Used within the Trap Notification PDU. It returns the following values none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure
dot1wRstTrapsControlTable
List of per virtual bridge TrapsControl Info.
dot1wRstTrapsControlEntry
Virtual bridge TrapsControl information.
dot1wSetTraps
This object is used to enable and disable context-specific RSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - Protocol up or down traps. 2 - Exception Traps like port protocol migration or invalid packet rcvd in port 3 - All t ...
dot1wGenTrapType
Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN
dot1wPortTrapNotificationTable
This table is used to store the notification information occurred in each of the port for protocol migration and invalid packet received
dot1wPortTrapNotificationEntry
This entry is used to store the notification information
dot1wPortTrapIndex
A unique value, greater than zero, indicating the Port number.
dot1wPortMigrationType
Port Protocol migration type occurred in the port
dot1wPktErrType
Type of invalid packet received in each of the port
dot1wPktErrVal
Packet error value corresponding to the above type
dot1wPortRoleType
Particular Role Selected for the Port
dot1wOldRoleType
Particular Role which is existing for the Port
dot1qVlanGlobalTrace
Enable/Disable the global trace in VLAN.
dot1qVlanGlobalsTable
List of per virtual context Vlan Module Parameters.
dot1qVlanGlobalsEntry
Per virtual context Vlan module parmaters.
dot1qVlanGlobalsContextId
Identifies the virtual context in the system.
dot1qGarpShutdownStatus
The administrative status requested by management for GARP The value true(1) indicates that GARP should be shutdown in the device on all ports. All memory will be released. The value false(2) indicates that GARP should be active in the device on all ports ...
dot1qVlanDebug
Enables the tracing in the selected submodule in VLAN. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BI ...
dot1qVlanLearningMode
The type of VLAN learning mode.
dot1qVlanOperStatus
The operational status of the Vlan module. The value enabled(1) indicates that Vlan module is currently enabled in the device. The value disabled(2) indicates that Vlan module is currently disabled in the device.
dot1qGvrpOperStatus
The operational status of the GVRP module. The value enabled(1) indicates that GVRP module is currently enabled in the device. The value disabled(2) indicates that GVRP module is currently disabled in the device.
portBaseVlanEnablePerPort
The set of ports which are in port-based VLAN mode.
portBaseVlanCurrentTable
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
tabPortBaseVlanCurrentEntry
Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
portBaseVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
portBaseVlanName
The VLAN-Name referring to this VLAN.
portBaseVlanCurrentEgressPorts
The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
portBaseVlanStatus
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in portBaseVlanStaticTable, i ...
portBaseVlanCreationTime
The value of sysUpTime when this VLAN was created.
portBaseVlanRowStatus
The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active.
portBaseStaticUnicastTable
A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific un ...
tabPortBaseStaticUnicastEntry
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
portBaseStaticUnicastIndex
The index of entries int this table.
portBaseStaticUnicastVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
portBaseStaticUnicastAddress
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
portBaseStaticUnicastAllowedToGoTo
The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports a specific unicast address may be dynamically learnt on. The portBaseTpFdbTable will have an ...
portBaseStaticUnicastStatus
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. per ...
portBaseStaticUnicastRowStatus
The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active.
portBaseStaticMulticastTable
A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific ...
tabPortBaseStaticMulticastEntry
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be f ...
portBaseStaticMulticastIndex
The index of entries int this table.
portBaseStaticMulticastVlanIndex
The VLAN-ID or other identifier referring to this VLAN.
portBaseStaticMulticastAddress
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
portBaseStaticMulticastStaticEgressPorts
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information e.g. from GMRP. A port may not be added in this set if it is already a ...
portBaseStaticMulticastStatus
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. per ...
portBaseStaticMulticastRowStatus
The status of this concsystual row. All writable objects in this row may be modified only when the row status is not active.
fsLldpSystemControl
The administrative system control status of LLDP module. The value 'start' (1) indicates that all resources required by LLDP module should be allocated and LLDP should be supported in the device on all ports. The value 'shutdown' (3) indicates that LLDP s ...
fsLldpModuleStatus
The administrative module status of LLDP module. This enables or disables LLDP in the system. A value of 'enabled' (1) indicates that LLDP is enabled in the device and can be enabled port-wise. A value of 'disabled' (2) indicates that LLDP is disabled in ...
fsLldpTraceInput
This object stores the trace option string input given by the user. To enable particular trace the user has to enter the corresponding string(given below) assigned for that. And for enabling more than once traces the user has to enter the corresponding st ...
fsLldpTraceOption
This object is used to store the trace options that are enabled by the user. The bit positions of the traces is shown below Bit 0 - init-shut Bit 1 - mgmt Bit 2 - data Bit 3 - ctrl Bit 4 - pkt-dump Bit 5 - resource Bit 6 - all-fail Bit 7 - buf Bit ...
fsLldpLocChassisIdSubtype
The type of encoding used to identify the chassis component associated with the local system. When chassis id subtype is configured as chassiscomp/portcomp/local it is mandatory to configure the fsLldpLocChassisId object. If fsLldpLocChassisId object is n ...
fsLldpLocChassisId
The string value used to identify the chassis component associated with the local system. Write operation to this object is allowed only when the chassis id subtype is configured as chassiscomp/portcomp/local. When chassis id subtype is configured as ifal ...
fsLldpLocPortTable
This table contains one or more rows per port information associated with the local system known to this agent.
fsLldpLocPortEntry
Information about a particular port component. Entries may be created and deleted in this table by the agent.
fsLldpLocPortIdSubtype
The type of port identifier encoding used to identify the port component associated with the local port. When port id subtype is configured as portcomp/local it is mandatory to configure the fsLldpLocPortId object. If fsLldpLocPortId object is not configu ...
fsLldpLocPortId
TThe string value used to identify the port component associated with the local port. Write operation to this object is allowed only when the chassis id subtype is configured as chassiscomp/portcomp/local. When chassis id subtype is configured as ifalias/ ...
fsLldpPortConfigNotificationType
This object is used to set the notification type. If the associated fsLldpNotificationType object has a value of remTabChg (1),then LLDP agent sends trap notification to NMS whenever remote table change occurs. If the associated fsLldpNotificationType obj ...
fsLldpMemAllocFailure
This object gives the count of total memory allocation failures
fsLldpInputQOverFlows
This object gives the count of total input queue overflows
fsLldpStatsRemTablesUpdates
The number of times any information advertised by a particular MSAP is updated in tables contained in lldpRemoteSystemsData and lldpExtensions objects.
voiceVlanMode
Voice VLAN is a feature that allows you to automatically place the voice traffic from IP phone to an assigned VLAN to enhance the VoIP service. This object is for enabling or disabling Voice Vlan function in the system. If the Vlan mode is in Asymmetric V ...
voiceVlanId
The ID of VLAN that you want the voice traffic to be in. It must be a exist vlan id.
voiceVlanTimeout
A period of time in hour to remove a port from voice VLAN if the port is an automatic VLAN member. The Timeout range is 1~120 hours. Default aging time is 1 hour.
voiceVlanPriority
The 802.1p priority levels of the traffic in the Voice VLAN.
voicevlanPortControlTable
A table that contains Voice Vlan Port Control configuration information.
voicevlanPortControlEntry
A list of Voice Vlan Control configuration parameters for each Port on this device.
voicevlanPortControlIndex
The voice vlan port index.
voicevlanPortAutoDetection
This object is for enabling or disabling Voice Vlan Auto Detection in the port. If the auto detection is enable, switch will add this port to the voice VLAN automatically if it detects the device OUI matches the Telephony OUI. If the port is a static memb ...
voicevlanPortState
This object indicates Voice vlan state to this Port. manual - this port is a static member of voice vlan. dynamic - this port is a dynamic member of voice vlan. none - this port is not a member of voice vlan.
voicevlanOUITable
A voice vlan OUI entry containing the description and mac.
voicevlanOUIEntry
A voice vlan OUI entry containing the description and mac.
voicevlanOUITelephonyOUI
An Organizationally Unique Identifier (OUI) is a 24-bit number that is purchased from the IEEE Registration Authority. This identifier uniquely identifies a vendor, manufacturer, or other organization. This object indicates the voice traffic's OUI that us ...
voicevlanOUIDescription
The Description for the OUI.
voicevlanOUIMask
Voice vlan OUI Mask. Always be FF:FF:FF:00:00:00.
voicevlanOUIStatus
This object indicates the status of this entry. To create a new entry, you must set the voicevlanOUIStatus to be CreateAndGo, then this entry will turn to be Active.
trafficSegTable
A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection polic ...
trafficSegEntry
There is one entry in this table for each created port-channel port
trafficSegIfIndex
The ifIndex of the port-channel(Aggregator's interface index).
trafficSegMemberList
List of the member port of the port-channel.
atiAclClassifierTable
ACL Classifier entry table.
atiAclClassifierEntry
Classifier is used to specify a packet type for Policies.
atiAclClassifierIndex
The index of the Classifier entry.
atiAclClassifierSrcMac
Source MAC address.
atiAclClassifierSrcMacMaskLen
Source MAC mask length. 1-48: length in bits 0: Ignored
atiAclClassifierDstMac
Destination MAC address.
atiAclClassifierDstMacMaskLen
Destination MAC mask length. 1-48: length in bits 0: Ignored
atiAclClassifierVlanId
802.1Q Vlan Id. 1-4000: Vlan Id -1: Ignored
atiAclClassifierCos
802.1p priority. 0-7: 802.1p priority value -1: Ignored
atiAclClassifierEtherType
EtherType. 0-65535: EtherType number -1: Ignored
atiAclClassifierSrcIp
Source IP address.
atiAclClassifierSrcIpMaskLen
Source IP mask length. 1-32: length in bits 0: Ignored
atiAclClassifierDstIp
Destination IP address.
atiAclClassifierDstIpMaskLen
Destination IP mask length. 1-32: length in bits 0: Ignored
atiAclClassifierDscp
Differentiated Services Code Point. 0-63: DSCP value -1: Ignored
atiAclClassifierProtocol
Layer 4 protocol type. 0-255: Layer 4 protocol number -1: Ignored
atiAclClassifierSrcPort
TCP/UDP Source port. 0-65535: port number -1: Ignored
atiAclClassifierDstPort
TCP/UDP Destination port. 0-65535: port number -1: Ignored
atiAclClassifierRowStatus
The row status of the entry. 1: write - enable the entry read - entry is enabled 2: write - disable the entry read - entry is disabled 3: read - entry is not ready 5: write - create the entry 6: write - delete the entry
atiAclProfileActionTable
ACL Profile Action entry table.
atiAclProfileActionEntry
Profile Action is used to manipulate the DSCP or CoS values in a packet.
atiAclProfileActionIndex
The index of the Action entry.
atiAclProfileActionCos
Policied-Cos. 0-7: 802.1p priority value -1: Ignored
atiAclProfileActionDscp
Policied-DSCP. 0-63: DSCP value -1: Ignored
atiAclProfileActionRowStatus
The row status of the entry. 1: write - enable the entry read - entry is enabled 2: write - disable the entry read - entry is disabled 3: read - entry is not ready 5: write - create the entry 6: write - delete the entry
atiAclInProfileActionTable
ACL In-Profile Action entry table.
atiAclInProfileActionEntry
In-Profile Action is used to assign an action to a policy.
atiAclInProfileActionIndex
The index of the In-Profile Action entry.
atiAclInProfileActionPermitDeny
Permit/Deny action. 0: Permit 1: Deny
atiAclInProfileActionActionId
The index of Action entry used by this In-Profile entry. 1-72: Action entry index 0: Ignored
atiAclInProfileActionRowStatus
The row status of the entry. 1: write - enable the entry read - entry is enabled 2: write - disable the entry read - entry is disabled 3: read - entry is not ready 5: write - create the entry 6: write - delete the entry
atiAclOutProfileActionTable
ACL Out-Profile Action entry table.
atiAclOutProfileActionEntry
Out-Profile Action is used to assign a classifier index to a profile action ID as well as a committed rate and a burst size
atiAclOutProfileActionIndex
The index of the Out-Profile Action entry.
atiAclOutProfileActionPermitDeny
Permit/Deny action. 0: Permit 1: Deny
atiAclOutProfileActionCommittedRate
Committed rate in Kbps.
atiAclOutProfileActionBurstSize
Max burst size which is the maximum amount of data in KB.
atiAclOutProfileActionActionId
The index of Action entry used by this Out-Profile entry. 1-72: Action entry index 0: Ignored
atiAclOutProfileActionRowStatus
The row status of the entry. 1: write - enable the entry read - entry is enabled 2: write - disable the entry read - entry is disabled 3: read - entry is not ready 5: write - create the entry 6: write - delete the entry
atiAclPortListTable
ACL Port-List entry table.
atiAclPortListEntry
Port-List is used to specify a list of ports.
atiAclPortListIndex
The index of the Port-List entry.
atiAclPortListString
Port-list string. e.g. 1,3,5-8
atiAclPortListRowStatus
The row status of the entry. 1: write - enable the entry read - entry is enabled 2: write - disable the entry read - entry is disabled 3: read - entry is not ready 5: write - create the entry 6: write - delete the entry
atiAclPolicyTable
ACL Policy entry table.
atiAclPolicyEntry
Policy controls the ingress traffic on a port. It defines a category of traffic and the action of the port when it receives packets of the category.
atiAclPolicyIndex
The index of the Policy entry.
atiAclPolicyClassifierIndex
The index of Classifier entry used by this Policy entry.
atiAclPolicySequence
The sequence of the Policy entry.
atiAclPolicyInProfileIndex
The index of In-Profile entry used by this Policy entry.
atiAclPolicyOutProfileIndex
The index of Out-Profile entry used by this Policy entry. 0: Ignored
atiAclPolicyPortListIndex
The index of Port-List entry used by this Policy entry.
atiAclPolicyRowStatus
The row status of the entry. 1: write - enable the entry read - entry is enabled 2: write - disable the entry read - entry is disabled 3: read - entry is not ready 5: write - create the entry 6: write - delete the entry
atiDstMacFilterTable
DstMacFilter entry table.
atiDstMacFilterEntry
DstMacFilter is used to filter the packets by the specific Destination MAC.
atiDstMacFilterIndex
The index of the DstMacFilter entry.
atiDstMacFilterAddress
Destnation MAC address
atiDstMacFilterRowStatus
The row status of the entry. 1: write - enable the entry read - entry is enabled 2: write - disable the entry read - entry is disabled 3: read - entry is not ready 5: write - create the entry 6: write - delete the entry
dhcpSnoopSystemStatus
Enable/Disable DHCP Snooping.
dhcpSnoopOption82Insertion
Determine if to insert DHCP option 82 into packets.
dhcpSnoopPassThroughOption82
Determine if to pass through DHCP packets with option 82.
dhcpSnoopVerifyMACAddress
Determine if to verify MAC address for incoming DHCP packets.
dhcpSnoopBackupDatabase
Determine if to backup database to flash memory.
dhcpSnoopBackupDatabaseInterval
Determine the period to backup database.
dhcpSnoopVLANSettingTable
A table of DHCP snooping VLAN settings.
dhcpSnoopVLANSettingEntry
The entry of DHCP snooping VLAN setting table.
dhcpSnoopVLANSettingVID
The VLAN ID.
dhcpSnoopVLANSettingStatus
The VLAN status.
dhcpSnoopPortSettingTable
A table of DHCP snooping port settings.
dhcpSnoopPortSettingEntry
The entry of DHCP snooping port setting table.
dhcpSnoopPortSettingIndex
The port number.
dhcpSnoopPortSettingStatus
The port status.
dhcpSnoopBindindDatabaseTable
A table of DHCP snooping bindind database.
dhcpSnoopBindindDatabaseEntry
The entry of DHCP snooping bindind database table.
dhcpSnoopBindindDBMacAddress
The MAC address.
dhcpSnoopBindindDBVLANID
The VLAN ID.
dhcpSnoopBindindDBIPAddress
The IP address.
dhcpSnoopBindindDBPortNumber
The port number.
dhcpSnoopBindindDBType
The entry type.
dhcpSnoopBindindDBLeaseTime
The DHCP lease time.
dhcpSnoopBindindDBRowStatus
The entry row status.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list