remaining_time monitor - SNMP OIDs

MIBs list

OIDs - remaining_time

The objects described here can be monitored with the IPHost Network Monitor. You can start SNMP monitoring using free 30-day trial version of IPHost right now.

OID list for remaining time

host Top N Time Remaining
hostTopNTimeRemaining 1.3.6.1.2.1.16.5.1.1.4 (defined in RMON-MIB)
The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval.
host Top N Time Remaining
hostTopNTimeRemaining 1.3.6.1.2.1.16.5.1.1.4 (defined in rfc1271)
The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval.
host Top N Time Remaining
hostTopNTimeRemaining 1.3.6.1.2.1.16.5.1.1.4 (defined in rfc1757)
The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval.
Cabletron Agent Dhcp Server Lease Remaining Time
ctAgentDhcpServerLeaseRemainingTime 1.3.6.1.4.1.52.4.2.32.1.3.2.1.4 (defined in ct-fastpath-dhcpserver-mib)
This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.
sfps Call By Tuple Time Remaining
sfpsCallByTupleTimeRemaining 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.16 (defined in ctron-sfps-call-mib)
The number of time ticks remaining before this entry's timer expires and it is removed from the table.
Cabletron Timed Reset Time Remaining
ctTimedResetTimeRemaining 1.3.6.1.4.1.52.4.1.1.5.2.3 (defined in ctron-timed-reset-mib)
The time, in seconds, remaining until a reset will occur. The time is not meaningful if ctTimedResetStatus is disabled(0).
rbtws Blacklisting Remaining Time
rbtwsBlacklistingRemainingTime 1.3.6.1.4.1.52.4.15.1.2.71 (defined in rbtws-trap-mib)
The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible.
ups Estimated Run Time Remaining
upsEstimatedRunTimeRemaining 1.3.6.1.4.1.52.4.1.1.10.3.1.1.6 (defined in ups2-mib)
The UPS's estimated remaining run time in minutes. The UPS may be queried when operating in the on-line, bypass, or on-battery modes of operation. The run time estimate is based on available battery capacity and output load.
bsn Local Net User Remaining Time
bsnLocalNetUserRemainingTime 1.3.6.1.4.1.14179.2.5.10.1.7 (defined in AIRESPACE-WIRELESS-MIB)
This object indicates the remaining session time for the guest user in hundredths of a second.
Cisco ATM Matrix Top N Control Time Remaining
atmMatrixTopNControlTimeRemaining 1.3.6.1.4.1.9.10.16.1.4.4.1.4 (defined in ATM-RMON-MIB)
The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, and is immediately loaded into the associated atmMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of atmMatrixTopNControlTimeRemaining. Thus the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the atmMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the atmMatrixTopNTable shall be deleted.

MIBs list