The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port map
- PNNIx Map Originating Port Id
- pnnixMapOriginatingPortId 1.3.6.1.4.1.800.3.2.1.1.1.14.1.2 (defined in XPNNI-MIB)
The port identifier of the port as assigned by the originating node, to which the port is attached. - PNNIx Map Remote Port Id
- pnnixMapRemotePortId 1.3.6.1.4.1.800.3.2.1.1.1.14.1.8 (defined in XPNNI-MIB)
For horizontal links and uplinks, this attribute contains the port identifier of the port at the remote end of the link as assigned by the remote node. If unknown, the PNNI protocol entity sets this attribute's value to zero. For nodes, this attribute contains the port identifier of the port at the other end of the spoke or bypass from the originating port. When the originating port ID is zero, a value of zero indicates the default radius. When the originating port ID is non-zero, a value of zero indicates the nodal nucleus. - p Map Ingress Port
- pMapIngressPort 1.3.6.1.4.1.800.2.2.17.1.1.3 (defined in XYLAN-VLAN-MIB)
A physical port number that is associated with the Port Mapping Ingress Port. - p Map Egress Port
- pMapEgressPort 1.3.6.1.4.1.800.2.2.17.2.1.3 (defined in XYLAN-VLAN-MIB)
A physical port number that is associated with the Port Mapping Egress Port. - ds3 Port Cell Map
- ds3PortCellMap 1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.5 (defined in C-PRODUCT-DS3-MIB)
ATM cell mapping for the DS3 port. - e3 Port Cell Map
- e3PortCellMap 1.3.6.1.4.1.43.1.12.3.1.1.13.1.1.1.3 (defined in C-PRODUCT-E3-MIB)
ATM cell mapping for the E3 port. - Network AppleTalk Host Map Port Number
- nwAtHostMapPortNumber 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.7 (defined in ctron-appletalk-router-mib)
The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system and the number of circuits present on interfaces which are of WAN type. - Network DECnet IV Host Map Port Number
- nwDecIVHostMapPortNumber 1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1.6 (defined in ctron-deciv-router-mib)
The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of configured interfaces in the system and the number of circuits present on those interfaces which are of WAN type. - Network Ip Host Map Port Number
- nwIpHostMapPortNumber 1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.7 (defined in ctron-ip-router-mib)
The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system and the number of circuits present on interfaces which are of WAN type. - Network Ipx Host Map Port Number
- nwIpxHostMapPortNumber 1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.7 (defined in ctron-ipx-router-mib)
The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of configured interfaces in the system and the number of circuits present on those interfaces which are of WAN type. - port Map Repeater
- portMapRepeater 1.3.6.1.4.1.52.4.1.1.16.1.1.1.2 (defined in ctron-portmap-mib)
Gives the repeater number that this port is connected to. - port Map Capability
- portMapCapability 1.3.6.1.4.1.52.4.1.1.16.1.1.1.3 (defined in ctron-portmap-mib)
This indicates the technology ability of the local hardware. The value of this object is the logical OR of all supported technologies, where each technology is given the values below: other(1) Undefined, or ability not known Auto-Negotiation(2) Auto-Negotiation 10BASE-T(4) 10BASE-T 100BASE-TX(8) 100BASE-TX 1000BASE(16) 1000BASE For example, a port that has the capability of supporting 10BASE-T and 100BASE-TX would have a value of 12 (4 + 8). - port Map Operational Mode
- portMapOperationalMode 1.3.6.1.4.1.52.4.1.1.16.1.1.1.4 (defined in ctron-portmap-mib)
This indicates the current operational mode of this port. This value is a logical OR of the current operational mode, where each technology is given the values below: other(1) Undefined, or ability not known Auto-Negotiation(2) Auto-Negotiation 10BASE-T(4) 10BASE-T 100BASE-TX(8) 100BASE-TX 1000BASE(16) 1000BASE For example, a port that has auto-negotiated to a speed of 100BASE-TX would have a value of 10 (2 + 8). - port Map Last Seen Source Address
- portMapLastSeenSrcAddr 1.3.6.1.4.1.52.4.1.1.16.1.1.1.5 (defined in ctron-portmap-mib)
Returns last source address seen by this repeater port. - Cabletron Tx Queue Port Group Map Table
- ctTxQPortGroupMapTable 1.3.6.1.4.1.52.4.1.5.12.1.1 (defined in ctron-tx-queue-arbitration-mib)
The ctTxQPortGroupMapTable defines the mapping of interfaces to a specific port group. - Token Ring Port Station Port Map Enable
- tRingPortStnPortMapEnable 1.3.6.1.4.1.52.4.1.2.1.1.3.2.1.1.5 (defined in dot5-log-mib)
A write of mappingEnabled to this object permits a station port to be associated, or mapped, to a station participating in the ring poll process on this ring. A write of mappingDisabled prevents this association from taking place. This object is intended to be used when a network monitoring device, such as Network General's Sniffer (tm), is inserted on a ring but is not actively participating in the ring poll. The default value of this object is mappingEnabled. - Cisco 2900 Port Monitored Port Map
- c2900PortMonitoredPortMap 1.3.6.1.4.1.9.9.87.1.4.1.1.30 (defined in CISCO-C2900-MIB)
Indicates which ports are actually being monitored. The octet string contains one bit per port. Each bit within the octet string represents one port of the device. The ordering of ports represented within the octet string is in the same order as in the RFC 1493 dot1dStaticAllowedToGoTo in the dot1dStaticTable. The bit value interpretation is as follows: 1 = being monitored 0 = not being monitored
