The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port destination
- ipms Forward Destination Port Number
- ipmsFwdDstPortNumber 1.3.6.1.4.1.800.2.14.1.1.6.1.14 (defined in IPMS-MIB)
This field contains the port number of the destination svpn. - PNNIx Route Node Destination Port Id
- pnnixRouteNodeDestPortId 1.3.6.1.4.1.800.3.2.1.1.1.19.2.1.4 (defined in XPNNI-MIB)
The port ID of the destination node at which the route terminates. A port ID of zero indicates the node nucleus. When the destination node is represented by the simple node representation, this value should be set to zero. - Xylan ATM Vcl Modification Destination Port Index
- xylnatmVclModDestPortIndex 1.3.6.1.4.1.800.2.9.1.15.1.1.6 (defined in XYLAN-CSM-MIB)
Port Instance - br Static Destination Port
- brStaticDstPort 1.3.6.1.4.1.43.1.12.3.1.1.17.1.5.1.3 (defined in 3comab9300)
The port number to which this address is destined. If use slot/port, this object is ignored. - Cabletron Bridge Source Route Port Pair Destination Port
- ctBridgeSrPortPairDestPort 1.3.6.1.4.1.52.4.1.2.3.3.1.1.2 (defined in ctron-bridge-mib)
The destination port (ie the port which transmitted the packets) for which this entry has source routing information. - Cabletron IF Remap2 Destination Port
- ctIFRemap2DestPort 1.3.6.1.4.1.52.4.1.1.14.1.1.1.4 (defined in ctron-if-remap-2-mib)
The port combined with the ctIFRemap2DestSlot which will see all packets redirected from ctIFRemap2SourceSlot and ctIFRemap2SourcePort. - sfps L4 CDR Active Flow Destination Protocol Port
- sfpsL4CDRActiveFlowDestProtocolPort 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.13 (defined in ctron-sfps-l4ss-mib)
If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero. - l2 Port Destination Entries
- l2PortDstEntries 1.3.6.1.4.1.52.2501.1.2.8.1.9 (defined in ctron-ssr-l2-mib)
The number of MAC addresses/Flow entries that reside on this ports L2 table as a destination (i.e. for a flow entry the destination MAC address was not learned as a source). - l3 Flow Destination Port
- l3FlowDstPort 1.3.6.1.4.1.52.2501.1.3.1.1.9 (defined in ctron-ssr-l3-mib)
The destination UDP/TCP port for this flow. Official port numbers are defined in ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers - pol Acl Destination Port
- polAclDstPort 1.3.6.1.4.1.52.2501.1.12.4.1.11 (defined in ctron-ssr-policy-mib)
The source L3 IP destination port/socket ACL applies to. - Enterasys Firewall Service Destination High Port
- etsysFWServiceDstHighPort 1.3.6.1.4.1.5624.1.2.37.2.4.11.1.5 (defined in enterasys-firewall-mib)
The high port of the port range a packet's destination must match against. To match, the port number must be less than or equal to this value. This object is only used if destinationPort is set in etsysFWServiceType, in which case the value of 0 for this object is illegal. - Enterasys Firewall Ip Session Destination Port
- etsysFWIpSessionDstPort 1.3.6.1.4.1.5624.1.2.37.3.9.1.6 (defined in enterasys-firewall-mib)
The destination port of this session. - Enterasys Load Sharing Network Address Translation Binding Forward Destination Port
- etsysLsnatBindingForwardDstPort 1.3.6.1.4.1.5624.1.2.74.2.7.1.7 (defined in enterasys-lsnat-mib)
The forward destination port for this LSNAT binding entry. - Enterasys Mirror Destination Port Entry
- etsysMirrorDestinationPortEntry 1.3.6.1.4.1.5624.1.2.72.2.3.1 (defined in enterasys-mirror-config-mib)
A conceptual row in the etsysMirrorDestinationPortTable . - Enterasys Nat Binding Forward Destination Port
- etsysNatBindingForwardDstPort 1.3.6.1.4.1.5624.1.2.75.2.5.1.7 (defined in enterasys-nat-mib)
The forward destination port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'. - Enterasys Twcb Binding Destination Port
- etsysTwcbBindingDstPort 1.3.6.1.4.1.5624.1.2.76.2.9.1.7 (defined in enterasys-twcb-mib-2)
The destination port for this current TWCB binding entry. - bsn Acl Rule Start Destination Port
- bsnAclRuleStartDestinationPort 1.3.6.1.4.1.14179.2.5.8.1.12 (defined in AIRESPACE-WIRELESS-MIB)
Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule aplpies to 'Any' Destination port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536) - bsn Acl Rule End Destination Port
- bsnAclRuleEndDestinationPort 1.3.6.1.4.1.14179.2.5.8.1.13 (defined in AIRESPACE-WIRELESS-MIB)
Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule aplpies to 'Any' Destination port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536) - ALTIGA Nat Translation Destination Port
- alNatTranslationDestPort 1.3.6.1.4.1.3076.2.1.2.23.2.1.4 (defined in ALTIGA-NAT-STATS-MIB)
The external destinatin port. - ALTIGA Nat All Translation Destination Port
- alNatAllTranslationDestPort 1.3.6.1.4.1.3076.2.1.2.23.3.1.4 (defined in ALTIGA-NAT-STATS-MIB)
The external destinatin port. - ALTIGA Active Session Sub Entry Tcp Destination Port
- alActiveSessionSubEntryTcpDstPort 1.3.6.1.4.1.3076.2.1.2.17.6.1.30 (defined in ALTIGA-SESSION-STATS-MIB)
The TCP Dest port used by IKE/IPSec for this connection to permit access through a firewall. - ALTIGA Active Session Sub Entry Ike Udp Destination Port
- alActiveSessionSubEntryIkeUdpDstPort 1.3.6.1.4.1.3076.2.1.2.17.6.1.33 (defined in ALTIGA-SESSION-STATS-MIB)
The UDP Source port used by IPSec/UDP for IKE Session. - Cisco 2900 Port Monitor Destination Port
- c2900PortMonitorDestinationPort 1.3.6.1.4.1.9.9.87.1.4.1.1.28 (defined in CISCO-C2900-MIB)
Switch Port (c2900PortSwitchPortIndex) index value of the port that is to be monitored by this port. A value of zero can't be used to do set, it is used to return when this object is read. To remove a port from the monitored list use the object c2900PortNoMonitorDestinationPort. - Cisco Casa Affinity Cache Destination Destination Port
- cCasaAffinityCacheDestDestPort 1.3.6.1.4.1.9.9.122.1.4.2.1.3 (defined in CISCO-CASA-MIB)
The value used to compare the destination port of the TCP and UDP packets. - CISCO CASA Forwarding Agent Wildcard Affinity Destination Port
- ccfaWildcardAffDestinationPort 1.3.6.1.4.1.9.9.115.1.3.6.1.5 (defined in CISCO-CASA-FA-MIB)
The value used to compare the destination port of the TCP and UDP packets. A value of 0 means all port numbers will match. - Cisco Access Control List QoS Ip Flow Destination Port
- caqIpFlowDestPort 1.3.6.1.4.1.9.9.179.1.7.4.1.9 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates the destination port number of this logged IP flow when its protocol field is TCP or UDP. The value of this object is -1 if the flow is not UDP or TCP traffic.
