enterasys-nat-mib

enterasys-nat-mib Download

MIBs list

The Enterasys Networks Proprietary MIB module for entities implementing NAT.

With the IPHost SNMP tool, you can monitor any SNMP objects of the enterasys-nat-mib . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the enterasys-nat-mib .

OID list for enterasys-nat-mib

etsysNatStatsPoolsUsed
This object contains the number of NAT Pools currently configured.
etsysNatStatsListRulesUsed
This object contains the number of NAT List Rules currently configured.
etsysNatStatsStaticRulesUsed
This object contains the number of NAT Static Rules currently configured.
etsysNatStatsAddressUsed
This object contains the number of NAT IP Addresses currently configured.
etsysNatStatsPortMapsUsed
This object contains the number of NAT Port Maps currently configured.
etsysNatStatsBindingsCurrent
This object contains the current number of active NAT bindings.
etsysNatStatsBindingsHigh
This object contains the highest number of NAT bindings active at one time.
etsysNatStatsBindingsDeleted
This object contains the total number of NAT bindings that have been deleted.
etsysNatStatsBindingsTotal
This object contains the total number of NAT bindings created.
etsysNatStatsBindingsExhausted
This object contains the number of times a request to create a NAT binding failed because there were no available free entries.
etsysNatStatsBindingsMaxReached
This object contains the number of times a request to create a NAT binding failed because the maximum number of bindings specified in etsysNatConfigMaxEntries allowed has been reached.
etsysNatStatsBindingsNoIpAddr
This object contains the number of times a request to create a NAT binding failed because there were no available configured IP addresses to establish a binding.
etsysNatStatsBindingsNoPortmapPort
This object contains the number of times a request to create a NAT binding failed because there were no available Port Map Port entries to establish a binding.
etsysNatStatsBindingsNoFtpALG
This object contains the number of times a request to create a NAT binding failed because there were no available FTP ALG's to establish a binding.
etsysNatStatsBindingsPerSecond
This object contains the average number of NAT bindings created per second. Normalized for 5 seconds.
etsysNatStatsClear
Setting this object to a value of true(1) will clear NAT statistics and cause the following objects to be reset to zero and new values generated: etsysNatStatsBindingsDeleted, etsysNatStatsBindingsTotal, etsysNatStatsBindingsExhausted, etsysNatStatsBindin ...
etsysNatStatsClearDateAndTime
The date / time the NAT statistics were cleared.
etsysNatStatsTranslationProtocolRulesCount
The number of etsysNatTranslationProtocolRulesEntry in the etsysNatTranslationProtocolRulesTable
etsysNatStatsMinTimeoutValue
The minimum timeout value allowable for NAT timeouts.
etsysNatStatsMaxTimeoutValue
The maximum timeout value allowable for NAT timeouts.
etsysNatIpv4ConfigLogTranslations
This object contains the state of NAT IPv4 Translations logging. - `disabled', a log message will not be generated when a NAT binding is either created or deleted. - `enabled', a log message will be generated when a NAT binding is either created or delete ...
etsysNatIpv4ConfigInspectDNS
This object contains the state of NAT IPv4 Inspect/Fix up DNS. NAT DNS packet inspection and fix up consists of parsing DNS request or response packets, identifying IP addresses contained within that may need to be NAT'ed, and fixing up the DNS packet wit ...
etsysNatIpv4ConfigFtpCtrlPort
This object contains the NAT IPv4 FTP control port.
etsysNatIpv4ConfigMaxEntries
This object contains the maximum number of NAT IPv4 Translation entries. A value of '0' indicates that there is no limit.
etsysNatIpv4ConfigTimeout
This object contains the general NAT IPv4 idle translation timeout value.
etsysNatIpv4ConfigUdpTimeout
This object contains the NAT IPv4 UDP idle translation timeout value.
etsysNatIpv4ConfigTcpTimeout
This object contains the NAT IPv4 TCP idle translation timeout value.
etsysNatIpv4ConfigFtpTimeout
This object contains the NAT IPv4 FTP idle translation timeout value.
etsysNatIpv4ConfigDnsTimeout
This object contains the NAT IPv4 DNS idle translation timeout value.
etsysNatIpv4ConfigIcmpTimeout
This object contains the NAT IPv4 ICMP idle translation timeout value.
etsysNatIpv4ConfigFinRstTimeout
The timeout value after TCP FIN/RST observed on IPv4 NAT bindings. Setting a value of '0' results in this feature being disabled.
etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus
This object indicates if the IPv4 TCP FIN/RST timeout will apply to bindings only when the hardware connections have aged out. - `disabled', indicates the IPv4 TCP FIN/RST timeout does not apply to half closed bindings. - `enabled', indicates the IPv4 TCP ...
etsysNatTranslationProtocolRulesTable
A table of entries defining NAT rules for non standard protocols.
etsysNatTranslationProtocolRulesEntry
An entry in the etsysNatTranslationProtocolRulesTable defining the configuration values for a unique NAT Translation Protocol entry. The Translation Protocol Rules Table entry defines the protocol and timeout value for a NAT Translation Protocol.
etsysNatTranslationInetVersion
The Internet address version of the NAT Translation Protocol Rule.
etsysNatTranslationProtocol
The NAT Translation Internet Protocol number. A value of any(0) indicates that any protocol is allowed. Common IP Protocol values are ICMP(1), TCP(6) or UDP(17). All IP Protocol values except for TCP and UDP require a etsysNatTranslationPort value of ' ...
etsysNatTranslationPort
The port assigned to this NAT Translation Protocol entry. A value of '0' indicates any port is allowed for this NAT Translation Protocol entry. An entry in etsysNatTranslationProtocol of either TCP(6) or UDP(17) may contain a non-zero value in this entr ...
etsysNatTranslationTimeout
The timeout value for idle NAT translations using this NAT Translation Protocol entry.
etsysNatTranslationOneShot
This object enables the One Shot feature for this NAT Translation Protocol entry. One Shot is a feature specific to protocol bindings such as ICMP and UDP traffic such as DNS which are generally bi-directional and usually only send one packet in each dir ...
etsysNatTranslationRowStatus
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual ...
etsysNatPoolTable
A table of entries defining the operational characteristics of NAT Pools.
etsysNatPoolEntry
An entry in the etsysNatPoolTable containing the operational characteristics of a NAT Pool. A NAT Pool defines a range of public (outside) IP addresses defining this NAT pool and is identified by etsysNatPoolName.
etsysNatPoolAddressType
The Internet Protocol version. The value of this property affects the size and format of: etsysNatPoolFirstIpAddr, etsysNatPoolLastIpAddr, and etsysNatPoolNextIpAddr. All objects must be of the same INET Address Type.
etsysNatPoolName
This object contains the unique name of the NAT Pool.
etsysNatPoolFirstIpAddr
The assigned IP address represents the first IP address in the range for this NAT Pool entry.
etsysNatPoolLastIpAddr
The assigned IP address represents the last IP address in the range for this NAT Pool entry.
etsysNatPoolPrefixLen
The length of the IP network mask used to refine the range of IP addresses defined by etsysNatPoolFirstIpAddr and etsysNatPoolLastIpAddr in defining the range of IP addresses for this NAT Pool entry. The values for the index objects etsysNatPoolFirstIpAd ...
etsysNatPoolNextIpAddr
The Next NAT IP address that the pool is due to assign to a dynamic translation binding
etsysNatPoolAddrCount
The total number of IP addresses assigned to this NAT Pool entry.
etsysNatPoolAddrUsed
The total number of IP addresses in use for this NAT Pool entry.
etsysNatPoolAddrAlloc
The total number of IP addresses allocated for this NAT Pool entry.
etsysNatPoolOutOfAddrs
The number of times an allocation of a Pool entry failed because there were no available NAT IP addresses for this NAT Pool entry.
etsysNatPoolPortAlloc
The total number of Port Maps allocated for this Nat Pool entry.
etsysNatPoolOutOfPorts
The number of times an allocation of a Pool entry failed because there were no available NAT Port Maps for this NAT Pool entry.
etsysNatPoolConns
The current number of active NAT connections established using this NAT Pool entry.
etsysNatPoolHits
The total number of hits this NAT Pool has received.
etsysNatPoolListRulesCount
The total number of List Rules (etsysNatListPoolName) configured using this Nat Pool entry.
etsysNatPoolLsnatVservers
The number of Virtual Servers (etsysLsnatVserverSourceNatPool) using this Nat Pool.
etsysNatPoolRowStatus
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual ...
etsysNatListRuleTable
A table of entries defining the operational characteristics of NAT Lists rules.
etsysNatListRuleEntry
An entry in the etsysNatListRuleTable containing the operational characteristics of a NAT List rule. A NAT List rule defines the operational characteristics for the forming of dynamic address bindings from a pre-configured address pool (etsysNatPoolName) ...
etsysNatListRuleInetVersion
The Internet address version of the NAT List rule. The value of etsysNatListRuleInetVersion must be consistent with the value of etsysNatPoolAddressType defined by the etsysNatPoolName associated with this etsysNatListRuleEntry.
etsysNatListRuleDirection
This value identifies if this NAT List rule is associated with an 'inside' or 'outside' network.
etsysNatListRuleMatchType
This value identifies if this NAT List rule is associated with a 'source' or 'destination' packet.
etsysNatListRuleName
This object contains the unique name of the access-list of IP addresses to translate for the inside source address defined by this NAT List rule.
etsysNatListRuleInsideVrfName
This object contains the unique name of the Inside VRF for cross VRF NAT for this NAT List rule.
etsysNatListRulePoolName
This object contains the unique name of the NAT Pool. This value must be set with the row status set that creates the entry. The value may not be changed after the row is created.
etsysNatListRuleIfIndex
The outside NAT List rule interface index used for this NAT List rule entry. A value of '0' indicates that this List Rule would apply to 'any' interface. This value must be set with the row status set that creates the entry. The value may not be change ...
etsysNatListRuleOverloaded
This entry indicates if this NAT List rule entry will be overloaded enabling Network Address Port Translation (NAPT). This value must be set with the row status set that creates the entry. The value may not be changed after the row is created.
etsysNatListRuleConns
The current number of active NAT connections established on this NAT List rule entry.
etsysNatListRuleHits
The total number of hits this NAT List rule entry has received.
etsysNatListRuleRowStatus
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual ...
etsysNatStaticRuleTable
A table of entries defining the operational characteristics of NAT Static rules.
etsysNatStaticRuleEntry
An entry in the etsysNatStaticRuleTable containing the operational characteristics of a NAT Static rule. A NAT Static rule defines a range of private (inside) IP addresses and operational characteristics for which specified NAT Static rules will be appli ...
etsysNatStaticRuleAddressType
The Internet Protocol version. The value of this property affects the size and format of: etsysNatStaticRuleLocalIpAddr, and etsysNatStaticRuleGlobalIpAddr both objects must be of the same INET Address Type.
etsysNatStaticRuleDirection
This value identifies if this NAT Static rule is associated with an 'inside' or 'outside' network.
etsysNatStaticRuleMatchType
This value identifies if this NAT List rule is associated with a 'source' or 'destination' packet.
etsysNatStaticRuleProtocol
This object contains the NAT Binding protocol type. A value of '0' indicates that the protocol type is 'any' and requires that etsysNatStaticRuleLocalPort and etsysNatStaticRuleGlobalPort be set to a value of '0'. A value of tcp(6) or udp(17) indicates ...
etsysNatStaticRuleLocalIpAddr
The NAT Static Local rule IP addresses representing the local IP address for this NAT Static rule entry.
etsysNatStaticRuleLocalPort
The NAT Static Local rule port representing the local port for this NAT Static rule entry. This value is only meaningful if the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17) otherwise this value must be set to '0'.
etsysNatStaticRuleGlobalIpAddr
The NAT Static Global rule IP addresses representing the global IP address for this NAT Static rule entry.
etsysNatStaticRuleGlobalPort
The NAT Static Global rule port representing the global port for this NAT Static rule entry. This value is only meaningful if the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17) otherwise this value must be set to '0'.
etsysNatStaticRuleInsideVrfName
This object contains the unique name of the Inside VRF for cross VRF NAT.
etsysNatStaticRuleOverloaded
This entry indicates if this NAT Static rule entry is overloaded enabling Network Address Port Translation (NAPT). If the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17) this value will display true(1) otherwise it will display false(2).
etsysNatStaticRuleConns
The current number of active NAT connections established on this NAT Static rule entry.
etsysNatStaticRuleHits
The total number of hits this NAT Static rule entry has received.
etsysNatStaticRuleReservedBindingId
This value is a unique NAT Static rule binding identifier reserved by NAT at the creation of this Static rule entry. A value of '0' indicates that there is no binding identifier currently set for this static entry.
etsysNatStaticRuleRowStatus
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual ...
etsysNatBindingTable
A table of entries defining active NAT bindings.
etsysNatBindingEntry
An entry in the etsysNatBindingTable defining an active NAT binding. The etsysNatBindingEntry defines the runtime characteristics of a NAT binding.
etsysNatBindingId
This value is a unique NAT binding identifier assigned by NAT during binding creation.
etsysNatBindingState
This object contains the state of the binding. - `init', indicates this binding is initializing. - `syncing', indicates this binding is syncing. - `waitroute', indicates this binding is in a wait route state. - `established', indicates this binding is est ...
etsysNatBindingAddressType
The Internet Protocol version. The value of this property affects the size and format of: etsysNatBindingForwardSrcIp, etsysNatBindingForwardDstIp, etsysNatBindingReverseSrcIp and etsysNatBindingReverseDstIp objects.
etsysNatBindingForwardSrcIp
The forward source IP address for this NAT binding entry.
etsysNatBindingForwardSrcPort
The forward source port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
etsysNatBindingForwardDstIp
The forward destination IP address for this NAT binding entry.
etsysNatBindingForwardDstPort
The forward destination port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
etsysNatBindingReverseSrcIp
The reverse NAT source IP address for this NAT binding entry.
etsysNatBindingReverseSrcPort
The reverse NAT source port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
etsysNatBindingReverseDstIp
The reverse NAT destination IP address for this NAT binding entry.
etsysNatBindingReverseDstPort
The reverse NAT destination port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
etsysNatBindingRuleType
This object contains the NAT Binding Rule type. - `static', indicates that the NAT binding is static. - `dynamic', indicates that the NAT binding is dynamic. - `staticReserved', indicates that the NAT binding is static (reserved). - `dynamicReserved', ind ...
etsysNatBindingPoolName
This object contains the name of the NAT Pool (etsysNatPoolName) associated with this NAT binding.
etsysNatBindingProtocol
This object contains the NAT Binding protocol type. A value of '0' indicates that the protocol type is 'any'. Common IP Protocol values are TCP(6) and UDP(17).
etsysNatBindingAlgType
This object contains the NAT ALG Binding type. - `none', indicates that this NAT binding is not an ALG binding. - `ftpctrl', indicates that this NAT binding is a FTP control binding. - `ftpdata, indicates that this NAT binding is a FTP data binding. - `tf ...
etsysNatBindingFtpDataChannelCount
This object contains the NAT Binding FTP Data channel. This value is only significant if the etsysNatBindingAlgType is ftpctrl(2), otherwise this object will return a value of '0'.
etsysNatBindingIcmpFwdIdent
This object contains the NAT Binding ICMP Forward ID. This value is only significant if the etsysNatBindingAlgType is icmpecho(5), otherwise this object will return a value of '0'.
etsysNatBindingIcmpRevIdent
This object contains the NAT Binding ICMP Reverse ID. This value is only significant if the etsysNatBindingAlgType is icmpecho(5), otherwise this object will return a value of '0'.
etsysNatBindingHWConns
This object contains the total number of hardware connections currently active using this NAT binding.
etsysNatBindingCreationDate
The creation date / time for this NAT binding entry.
etsysNatBindingExpirationDate
The expiration date / time for this NAT binding entry. If the NAT binding expire time (etsysNatBindingExpireTime) is '0' there is no expiration date and this object will return the current date / time.
etsysNatBindingIdleTime
The consecutive number of seconds this NAT binding entry has been idle.
etsysNatBindingExpireTime
The number of idle seconds left before this NAT binding entry will age out. A value of '0' indicates that this NAT binding will not age out.
etsysNatBindingClear
Setting this object to a value of true(1) will cause this etsysNatBindingEntry to be deleted from the etsysNatBindingTable if the corresponding etsysNatBindingRuleType is 'dynamic(2)' or 'dynamicReserved(4)' otherwise the binding entry will not be deleted ...
etsysNatMIBGlobalStatsGroup
The information group for NAT global resources and operations.
etsysNatMIBGlobalIpv4ConfigGroup
The information group for NAT IPv4 global resources and operations.
etsysNatMIBTranslationProtocolRulesTableGroup
The information group for NAT global IPv4 Translation Protocol Rules configuration.
etsysNatMIBNatPoolTableGroup
The information group for NAT Pool configurations.
etsysNatMIBNatListRuleTableGroup
The information group for NAT List rule configurations.
etsysNatMIBNatStaticRuleTableGroup
The information group for NAT static rule configurations.
etsysNatMIBNatBindingTableGroup
The information group for NAT bindings.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list