The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for load balance
- Cabletron Trunk Config Load Balance
- ctTrunkConfigLoadBalance 1.3.6.1.4.1.52.4.1.2.20.1.1.3.1.4 (defined in ctron-smarttrunk-mib)
The type of load balance algorithm applied to this trunk. Once Row is active, the agent may override this value with an implmentation specific default. - Cisco Global Server Load Balancer DNS Clause Balance Method
- cgdClauseBalanceMethod 1.3.6.1.4.1.9.9.595.1.8.1.1.3 (defined in CISCO-GSLB-DNS-MIB)
This object specifies the balance method associated with the clause. - Cisco GPRS Access Point Pcscf Load Balance
- cgprsAccPtPcscfLoadBalance 1.3.6.1.4.1.9.9.183.1.1.3.1.26 (defined in CISCO-GPRS-ACC-PT-MIB)
The Proxy-CSCF server group represented by the object cgprsAccPtPcscfServerGroupName contains a list of Proxy-CSCF addresses which will be provided to the MS(UE) in the PCO (Protocol Configuration Option) response message. The object cgprsAccPtPcscfLoadBalance when set to 'true', enables Gateway to include the IP address of the least loaded P-CSCF server in the PCO response message. Round Robin algorithm is used for the selection of the least loaded P-CSCF server. - hp Generic Repeater Load Balance Now
- hpGRpLoadBalanceNow 1.3.6.1.4.1.11.2.14.11.4.4.2 (defined in hpprocurve-hpgnrptr)
Setting this object to 'balancing' will cause the agent to distribute ports in the stack across the repeater segments, attempting to balance the traffic load on each segment. When the agent has finished the load balancing, it will set the value of this object to 'completed'. Setting this object to 'undoLast' will cause the agent to return all of the ports to the segment they were on before the last load balancing. This object will have the value of 'cantUndo' if there has been no load balancing since the last agent reset or if the last load balancing has already been undone. This object can only be set to 'undoLast' when its current value is 'completed'. - hp Generic Repeater Last Load Balance Time
- hpGRpLastLoadBalanceTime 1.3.6.1.4.1.11.2.14.11.4.4.3 (defined in hpprocurve-hpgnrptr)
This object contains the value of sysUpTime for the last time the hpGRPLoadBalanceNow object was set to 'balancing'. If load balancing has not been performed since the last agent reset, this object will have the value 0. - hp Generic Repeater Load Balance Now
- hpGRpLoadBalanceNow 1.3.6.1.4.1.11.2.14.11.4.4.2 (defined in hpprocurve-v2-hpgnrptr)
Setting this object to 'balancing' will cause the agent to distribute ports in the stack across the repeater segments, attempting to balance the traffic load on each segment. When the agent has finished the load balancing, it will set the value of this object to 'completed'. Setting this object to 'undoLast' will cause the agent to return all of the ports to the segment they were on before the last load balancing. This object will have the value of 'cantUndo' if there has been no load balancing since the last agent reset or if the last load balancing has already been undone. This object can only be set to 'undoLast' when its current value is 'completed'. - hp Generic Repeater Last Load Balance Time
- hpGRpLastLoadBalanceTime 1.3.6.1.4.1.11.2.14.11.4.4.3 (defined in hpprocurve-v2-hpgnrptr)
This object contains the value of sysUpTime for the last time the hpGRPLoadBalanceNow object was set to 'balancing'. If load balancing has not been performed since the last agent reset, this object will have the value 0. - HP Integrated Communication Facility Gen Rptr Load Balance Group
- hpicfGenRptrLoadBalanceGroup 1.3.6.1.4.1.11.2.14.10.2.8.1.2.7 (defined in hpprocurve-v2-hpgnrptr)
A collection of objects for managing segment load balancing on multisegment repeaters with internal switches. - config Snapshot Server Load Balance Select
- configSnapshotServerLoadBalanceSelect 1.3.6.1.4.1.6486.800.1.2.1.11.1.1.1.32 (defined in ALCATEL-IND1-CONFIG-MGR-MIB)
A set of this object causes server load balancing configuration data to be included in the snap-shot file generated by the device. - Alcatel QoS Action Load Balance Group
- alaQoSActionLoadBalanceGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48 (defined in ALCATEL-IND1-QOS-MIB)
Name of load balance group to use for traffic - Alcatel QoS Action Load Balance Group Status
- alaQoSActionLoadBalanceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49 (defined in ALCATEL-IND1-QOS-MIB)
is specified(enabled) or not(disabled). - Alcatel QoS Applied Action Load Balance Group
- alaQoSAppliedActionLoadBalanceGroup 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.48 (defined in ALCATEL-IND1-QOS-MIB)
Name of load balance group to use for traffic - Alcatel QoS Applied Action Load Balance Group Status
- alaQoSAppliedActionLoadBalanceGroupStatus 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.49 (defined in ALCATEL-IND1-QOS-MIB)
is specified(enabled) or not(disabled). - Alcatel QoS Stats Load Balance Flows
- alaQoSStatsLoadBalanceFlows 1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.18 (defined in ALCATEL-IND1-QOS-MIB)
Number of server load balanced flow entries - NETSCREEN Nat Vip Configure Load Balance
- nsNatVipCfgLoadBalance 1.3.6.1.4.1.3224.11.3.1.1.6 (defined in NETSCREEN-NAT-MIB)
Load balance algorithm for the Virtual IP servers. - NETSCREEN Nat Vip Server Load Balance
- nsNatVipServerLoadBalance 1.3.6.1.4.1.3224.11.3.2.1.4 (defined in NETSCREEN-NAT-MIB)
Load balance algorithm for the vitural IP servers.
