cSdslStucThresholdSnrMgn - Cisco Sdsl Stuc Threshold Snr Mgn - CISCO-SDSL-LINE-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cSdslStucThresholdSnrMgn

Cisco Sdsl Stuc Threshold Snr Mgn
1.3.6.1.4.1.9.9.155.1.14.1.12

This object specifies the SNR margin threshold. An appropriate alarm should be generated when the difference between the actual SNR and the SNR required to maintain BER of 10E-7 is less than this value. The value for this object must be in multiples of 10. The specified value will be rounded down to the nearest valid tenth dB level if the value is not in multiples of 10. If the agent implements the CISCO-ENTITY-ALARM-MIB, the alarm generated should be through the mechanism defined by the CISCO-ENTITY-ALARM-MIB. Furthermore, the default severity of this alarm should be 'minor'.

Back to CISCO-SDSL-LINE-MIB MIB page.

IPHost Network monitor allows you to monitor cSdslStucThresholdSnrMgn on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

Easy monitoring of cSdslStucThresholdSnrMgn with IPHost tools

MIBs list