dsx3AlarmConfigEntry - dsx3 Alarm Config Entry - CISCO-MGX82XX-DSX3-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

dsx3AlarmConfigEntry

dsx3 Alarm Config Entry
1.3.6.1.4.1.351.110.4.4.1.2.1.1

An entry in the DSX3 Alarm Configuration table. Thresholds may be configured for: Line Code Violations (LCV), LineErrored Seconds (LES), Line Severely Errored Seconds (LSES), P-bit Coding Violations (PCV), P-bit Errored Seconds (PES), P-bit Severely Errored Seconds(PSES), Severely Errored Seconds (SES), Severely Errored Framing Seconds(SEFS), Unavailable Seconds (UAS), C-bit coding violations (CCV), C-bit errored seconds (CES), C-bit errored seconds (CSES). Once these thresholds are exceeded, minor or major alarms are raised. Please refer to RFC2496 for descriptions of these errors.

Back to CISCO-MGX82XX-DSX3-MIB MIB page.

IPHost Network monitor allows you to monitor dsx3AlarmConfigEntry on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.

Easy monitoring of dsx3AlarmConfigEntry with IPHost tools

MIBs list