The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for traffic shaping
- Cisco Class Based Qos Traffic Shaping Delay Counters Group
- cbQosTrafficShapingDelayCountersGroup 1.3.6.1.4.1.9.9.166.2.2.18 (defined in CISCO-CLASS-BASED-QOS-MIB)
Optional objects to provide CB QoS traffic-shaping information. - ad Gen AOS Qos Interface Traffic Shaping Rate
- adGenAOSQoSInterfaceTrafficShapingRate 1.3.6.1.4.1.664.5.53.2.1.3.1.16 (defined in ADTRAN-AOS-QOS)
Outbound traffic shaping rate in bits per second. - ad Gen AOS Qos Interface Traffic Shaping Burst
- adGenAOSQoSInterfaceTrafficShapingBurst 1.3.6.1.4.1.664.5.53.2.1.3.1.17 (defined in ADTRAN-AOS-QOS)
Outbound traffic shaping burst in bytes. - atm If Iisp Sig Vcd Traffic Shaping
- atmIfIispSigVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmIispMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled. - atm If Vpt Iisp Sig Vcd Traffic Shaping
- atmIfVptIispSigVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmIispMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled. - atm If Vpt Pnni Sig Vcd Traffic Shaping
- atmIfVptPnniSigVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmPnniMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled. - atm If Vpt Pnni Rcc Vcd Traffic Shaping
- atmIfVptPnniRccVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmPnniMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled. - atm If Pnni Sig Vcd Traffic Shaping
- atmIfPnniSigVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmPnniMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled. - atm If Pnni Rcc Vcd Traffic Shaping
- atmIfPnniRccVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmPnniMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled. - atm If Uni Sig Vcd Traffic Shaping
- atmIfUniSigVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmUniMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled. - atm If Vpt Uni Sig Vcd Traffic Shaping
- atmIfVptUniSigVcdTrafficShaping (defined in Nortel-Magellan-Passport-AtmUniMIB)
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
