The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for traffic enable
- Device Traffic Enable
- devTrafficEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.1.1.1 (defined in irm3-mib)
Enable the sending of device level traffic traps. - bd Traffic Enable
- bdTrafficEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.2.1.1 (defined in irm3-mib)
Enable the sending of board level traffic traps for this board. - port Traffic Enable
- portTrafficEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.1.1 (defined in irm3-mib)
Enable the sending of port level traffic traps for this port. - Device Traffic Enable
- devTrafficEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.1.1.1 (defined in repeater-mib-2)
Enable or disable the checking for device level traffic thresholds getting exceeded. - bd Traffic Enable
- bdTrafficEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.2.1.1 (defined in repeater-mib-2)
Enable or disable the checking for board level traffic thresholds getting exceeded. - port Traffic Enable
- portTrafficEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.1.1 (defined in repeater-mib-2)
Enable or disable the checking for port level traffic thresholds getting exceeded. - Repeater Alarms Traffic Enable
- rptrAlarmsTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.1.3.1 (defined in repeater-rev4-mib)
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. - Repeater Port Group Alarm Traffic Enable
- rptrPortGrpAlarmTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2 (defined in repeater-rev4-mib)
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. - Repeater Port Alarm Traffic Enable
- rptrPortAlarmTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 (defined in repeater-rev4-mib)
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. - Cisco Catalyst 6000 Crossbar Traffic Monitor Switch Bus Utilization Enable
- cc6kxbarTMSwBusUtilEnable 1.3.6.1.4.1.9.9.217.1.9.1.1 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Specifies whether the traffic monitor feature is enabled on the switching bus or not. - Cisco Catalyst 6000 Crossbar Traffic Monitor Switch Bus Utilization Notification Enable
- cc6kxbarTMSwBusUtilNotifEnable 1.3.6.1.4.1.9.9.217.1.9.1.8 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Specifies whether the generation of c6kxbarTMSwBusUtilAboveNotif and c6kxbarTMSwBusUtilBelowNotif notifications is enabled or not. When this object is 'true', the generation of cc6kxbarTMSwBusUtilAboveNotif and c6kxbarTMSwBusUtilBelowNotif notifications is enabled. When this object is 'false', the generation of cc6kxbarTMSwBusUtilAboveNotif and c6kxbarTMSwBusUtilBelowNotif notifications is disabled. - Cisco Catalyst 6000 Crossbar Traffic Monitor Channel Utilization Enable
- cc6kxbarTMChUtilEnable 1.3.6.1.4.1.9.9.217.1.9.2.1.1.4 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Specifies whether the traffic monitor feature is enabled on a fabric channel for a given traffic direction or not. - Cisco Catalyst 6000 Crossbar Traffic Monitor Channel Utilization Notification Enable
- cc6kxbarTMChUtilNotifEnable 1.3.6.1.4.1.9.9.217.1.9.2.4 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Specifies whether the generation of cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif notifications is enabled or not. When this object is 'true', the generation of cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif notifications is enabled. When this object is 'false', the generation of cc6kxbarTMChUtilAboveNotif and cc6kxbarTMChUtilBelowNotif notifications is disabled. - Cisco Switch QOS Police Redirected Traffic Enable
- csqPoliceRedirectedTrafficEnable 1.3.6.1.4.1.9.9.580.1.1.2 (defined in CISCO-SWITCH-QOS-MIB)
This object specifies whether ACL-redirected traffic policing is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether ACL-redirected traffic is enabled at any different level of granularity, then this object's value is not subject to any modifiers. However, some devices might support other object(s) which specify whether ACL-redirected traffic policing is enabled at different level(s) of granularity. For such devices, the value of this object takes precedence over the values of such other object(s) when the value of this object is 'false'; in contrast, when the value of this object is 'true', the values of such other objects take precedence over the value of this object. if 'true', ACL-redirected traffic is subject to policing. if 'false', ACL-redirected traffic is not policed. - NETSCREEN Ply Traffic Shape Enable
- nsPlyTrafficShapeEnable 1.3.6.1.4.1.3224.10.1.1.20 (defined in NETSCREEN-POLICY-MIB)
User can set parameters for the control and shaping of traffic for each access policy.
