The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for tcp connection
- tcp Connection Failures
- tcpConnectionFailures 1.3.6.1.4.1.311.1.1.3.1.1.9.5 (defined in WINDOWS-NT-PERFORMANCE)
Connection Failures is the number of times TCP connections have made a direct transition to the CLOSED state from the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state. - ipv6 Tcp Connection Entry
- ipv6TcpConnEntry 1.3.6.1.2.1.6.16.1 (defined in IPV6-TCP-MIB)
A conceptual row of the ipv6TcpConnTable containing information about a particular current TCP connection. Each row of this table is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state. Note that conceptual rows in this table require an additional index object compared to tcpConnTable, since IPv6 addresses are not guaranteed to be unique on the managed node. - ipv6 Tcp Connection Local Port
- ipv6TcpConnLocalPort 1.3.6.1.2.1.6.16.1.2 (defined in IPV6-TCP-MIB)
The local port number for this TCP connection. - ipv6 Tcp Connection State
- ipv6TcpConnState 1.3.6.1.2.1.6.16.1.6 (defined in IPV6-TCP-MIB)
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return an error response (`badValue' for SNMPv1, 'wrongValue' for SNMPv2) if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably). - tcp Connection Entry
- tcpConnectionEntry 1.3.6.1.2.1.6.19.1 (defined in TCP-MIB)
A conceptual row of the tcpConnectionTable containing information about a particular current TCP connection. Each row of this table is transient in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state. - tcp Connection Local Port
- tcpConnectionLocalPort 1.3.6.1.2.1.6.19.1.3 (defined in TCP-MIB)
The local port number for this TCP connection. - tcp Connection Remote Port
- tcpConnectionRemPort 1.3.6.1.2.1.6.19.1.6 (defined in TCP-MIB)
The remote port number for this TCP connection. - tcp Connection State
- tcpConnState 1.3.6.1.2.1.6.13.1.1 (defined in TCP-MIB)
The state of this TCP connection. The only value that may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then the TCB (as defined in [RFC793]) of the corresponding connection on the managed node is deleted, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note, however, that RST segments are not sent reliably). - tcp Connection Local Address
- tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 (defined in TCP-MIB)
The local IP address for this TCP connection. In the case of a connection in the listen state willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used. - tcp Connection Table
- tcpConnTable 1.3.6.1.2.1.6.13 (defined in rfc1213)
A table containing TCP connection-specific information. - tcp Connection Entry
- tcpConnEntry 1.3.6.1.2.1.6.13.1 (defined in rfc1213)
Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state. - tcp Connection Remote Address
- tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 (defined in rfc1213)
The remote IP address for this TCP connection. - Cabletron Nat Total Tcp Connection
- ctNatTotTcpConn 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.19 (defined in ctron-nat-mib)
This is the number of TCP connections made using the Network Address Translator application since the last reset. - Cabletron Nat Connection Statistics TCP Ack
- ctNatConnStatsTCPAck 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.14 (defined in ctron-nat-mib)
This is the last TCP acknowledgement number of local host sent on this active connection. - Cabletron Nat Connection Statistics TCP State
- ctNatConnStatsTCPState 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.15 (defined in ctron-nat-mib)
This is the TCP connection state value on this active connection. - Cisco Channel Interface Processor Tcp Connection Entry
- cipTcpConnEntry 1.3.6.1.4.1.9.9.32.1.2.2.1 (defined in CISCO-CIPTCPIP-MIB)
A list of TCP connection values. - Cisco Channel Interface Processor Tcp Connection State
- cipTcpConnState 1.3.6.1.4.1.9.9.32.1.2.2.1.4 (defined in CISCO-CIPTCPIP-MIB)
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably). - Cisco Channel Interface Processor Tcp Connection Out Bytes
- cipTcpConnOutBytes 1.3.6.1.4.1.9.9.32.1.2.2.1.8 (defined in CISCO-CIPTCPIP-MIB)
The number of bytes received for this TCP connection. NOTE: To support SNMP Version 1 Managers, this variable is supplied as a 32 bit value which can wrap very frequently. - cisco Data Link Switching T Connection Tcp Config Table
- ciscoDlswTConnTcpConfigTable 1.3.6.1.4.1.9.10.9.1.2.4.1.1 (defined in CISCO-DLSW-MIB)
This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in ciscoDlswTConnConfigTable whose domain is ciscoDlswTCPDomain. - cisco Data Link Switching T Connection Tcp Config Entry
- ciscoDlswTConnTcpConfigEntry 1.3.6.1.4.1.9.10.9.1.2.4.1.1.1 (defined in CISCO-DLSW-MIB)
Each conceptual row defines parameters that are specific to ciscoDlswTCPDomain transport connections. - cisco Data Link Switching T Connection Tcp Operation Keep Alive Interval
- ciscoDlswTConnTcpOperKeepAliveInt 1.3.6.1.4.1.9.10.9.1.2.4.1.2.1.1 (defined in CISCO-DLSW-MIB)
The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol is operating. - Cisco DLSW T Connection Tcp Config Queue Max
- cdeTConnTcpConfigQueueMax 1.3.6.1.4.1.9.9.74.1.3.3.1.1.1.1 (defined in CISCO-DLSW-EXT-MIB)
Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row. - Cisco DLSW MIBT Connection Tcp Config Group
- cdeMIBTConnTcpConfigGroup 1.3.6.1.4.1.9.9.74.3.2.4 (defined in CISCO-DLSW-EXT-MIB)
Conformance group for configuration information for transport connections using TCP. - Cisco FCIP Management Fcip Link Ext Num Tcp Connection
- cfmFcipLinkExtNumTcpConn 1.3.6.1.4.1.9.9.329.1.1.2.1.2 (defined in CISCO-FCIP-MGMT-EXT-MIB)
The maximum number of TCP connections allowed on this link. - Cisco Fibre Channel IP Management Fcip Entity Tcp Connection Port
- cfmFcipEntityTcpConnPort 1.3.6.1.4.1.9.10.96.1.1.3.1.4 (defined in CISCO-FCIP-MGMT-MIB)
A TCP port other than the FCIP Well-Known port on which the FCIP entity listens for new TCP connection requests. It contains the value zero (0) if the FCIP Entity only listens on the Well-Known port. - Cisco Fibre Channel IP Management Fcip Tcp Connection Table
- cfmFcipTcpConnTable 1.3.6.1.4.1.9.10.96.1.1.5 (defined in CISCO-FCIP-MGMT-MIB)
A table containing FCIP specific information about this FCIP device's existing TCP connections. The FCIP TCP Connection table contains information about existing TCP connections. Each FCIP link within a FCIP entity manages one or more TCP connections. The FCIP entity employs a Data Engine for each TCP connection for handling FC frame encapsulation, de-encapsulation and transmission of FCIP frames on the connection. - Cisco Fibre Channel IP Management Fcip Tcp Connection MSS
- cfmFcipTcpConnMSS 1.3.6.1.4.1.9.10.96.1.1.5.1.5 (defined in CISCO-FCIP-MGMT-MIB)
The TCP Maximum Segment Size (MSS) for this TCP connection. - Cisco Fiber Channel Tunnel If Tcp Connection Initialization
- cftIfTcpConnInit 1.3.6.1.4.1.9.9.9999.1.1.4.1.2 (defined in CISCO-FC-TUNNEL-MIB)
Number of TCP connections initiated. - Cisco Fiber Channel Tunnel If Tcp Connection Accepted
- cftIfTcpConnAccepted 1.3.6.1.4.1.9.9.9999.1.1.4.1.3 (defined in CISCO-FC-TUNNEL-MIB)
Number of TCP requested connections accepted. - Cisco Fiber Channel Tunnel If Tcp Connection Dropped In Persist
- cftIfTcpConnDroppedInPersist 1.3.6.1.4.1.9.9.9999.1.1.5.1.11 (defined in CISCO-FC-TUNNEL-MIB)
Number of TCP connections dropped in persisting. - Cisco GSLB Health Monitor Tcp Connection Term Method
- cghMonTcpConnTermMethod 1.3.6.1.4.1.9.9.600.1.3.5 (defined in CISCO-GSLB-HEALTH-MON-MIB)
This object specifies the default connection termination method for a keepalive with cghMonKalMethod as 'tcp'. - ipv6 Tcp Connection Entry
- ipv6TcpConnEntry 1.3.6.1.2.1.6.16.1 (defined in ibm-tcpv6)
A conceptual row of the ipv6TcpConnTable containing information about a particular current TCP connection. Each row of this table is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state. Note that conceptual rows in this table require an additional index object compared to tcpConnTable, since IPv6 addresses are not guaranteed to be unique on the managed node. - ipv6 Tcp Connection Remote Address
- ipv6TcpConnRemAddress 1.3.6.1.2.1.6.16.1.3 (defined in ibm-tcpv6)
The remote IPv6 address for this TCP connection. - tn3270e Tcp Connection Remote Address Type
- tn3270eTcpConnRemAddrType 1.3.6.1.2.1.34.8.1.9.1.1 (defined in ibm-tn3270e)
Indicates the type of the value of the tn3270eTcpConnRemAddress object. For example, ipv4(1) or ipv6(2). - tn3270e Tcp Connection Last Activity
- tn3270eTcpConnLastActivity 1.3.6.1.2.1.34.8.1.9.1.7 (defined in ibm-tn3270e)
The number of 100ths of seconds since any data was transferred for the associating TCP Connection. - tn3270e Tcp Connection Bytes In
- tn3270eTcpConnBytesIn 1.3.6.1.2.1.34.8.1.9.1.8 (defined in ibm-tn3270e)
The number of bytes received by the server from TCP for this connection. - tn3270e Tcp Connection Device Type
- tn3270eTcpConnDeviceType 1.3.6.1.2.1.34.8.1.9.1.12 (defined in ibm-tn3270e)
Indicates the device type if negotiated with client. This object is also known as logmode. - tn3270e Tcp Connection Lu Lu Bind Image
- tn3270eTcpConnLuLuBindImage 1.3.6.1.2.1.34.8.1.9.1.19 (defined in ibm-tn3270e)
When there is a currently active LU-LU session for this connection, this object returns the BIND Image (defined to be bytes 1-p of the complete BIND Request Unit) that was received from the PLU during session activation. When there is no active LU-LU session, or when a BIND image is unavailable for some other reason, this object returns the empty string. - tn3270e Tcp Connection Sna State
- tn3270eTcpConnSnaState 1.3.6.1.2.1.34.8.1.9.1.20 (defined in ibm-tn3270e)
The current state of the SNA side of the end-to-end TN3270 connection. The following states are defined: unknown(0) - The true state is not known. noSluSession(1) - The SLU has neither an SSCP-LU nor an LU-LU session active. sscpLuSession(2) - The SSCP-LU session for the SLU is active, but the SLU is not currently in session with a PLU. luLuSession(3) - The SLU currently has an active session with a PLU.
