The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for status change
- m013 Dsx3 Remote Status Last Change
- m013Dsx3RemoteStatusLastChange 1.3.6.1.4.1.800.2.25.10.1.1.24 (defined in XYLAN-M013-MIB)
The value of MIB II's sysUpTime object at the time the Remote DS3/E3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value. - m013 Dsx1 Remote Status Last Change
- m013Dsx1RemoteStatusLastChange 1.3.6.1.4.1.800.2.25.11.1.1.7 (defined in XYLAN-M013-MIB)
The value of MIB II's sysUpTime object at the time the Remote DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value. - Repeater Group Last Operation Status Change
- rptrGroupLastOperStatusChange 1.3.6.1.2.1.22.1.2.1.1.5 (defined in rfc1516)
An object that contains the value of sysUpTime at the time that the value of the rptrGroupOperStatus object for this group last changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted. - rbtws Ap Status Radio Operational Statistics Auto Tune Channel Change Count
- rbtwsApStatRadioOpStatsAutoTuneChannelChangeCount 1.3.6.1.4.1.52.4.15.1.4.5.1.1.10.1.13 (defined in rbtws-ap-status-mib)
Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted. - rbtws Ap Status Radio Operational Statistics Mac Auto Tune Channel Change Count
- rbtwsApStatRadioOpStatsMacAutoTuneChannelChangeCount 1.3.6.1.4.1.52.4.15.1.4.5.1.1.11.1.12 (defined in rbtws-ap-status-mib)
Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted. - Enterasys Config Management Change Operation Status
- etsysConfigMgmtChangeOperStatus 1.3.6.1.4.1.5624.1.2.16.2.7.1.4 (defined in enterasys-configuration-management-mib)
The operational state of the configuration request. inactive - Indicates that the RowStatus of this conceptual row is not in the `active` state. pending - Indicates that the configuration change described by this row is ready to run and waiting in a queue. running - Indicates that the configuration change described by this row is running. success - Indicates that the configuration change described by this row has successfully run to completion. failure - Indicates that the configuration change described by this row has failed to run to completion. - Enterasys Config Management Change Row Status
- etsysConfigMgmtChangeRowStatus 1.3.6.1.4.1.5624.1.2.16.2.7.1.11 (defined in enterasys-configuration-management-mib)
A control that will allow one entry to be added, activated, deactivated, and removed from this table. When the value of this object is 'active' none of the other objects in this conceptual row can be modified. Setting this object to the 'active' state from the 'notInService' state will cause the requested configuration operation to be initiated. Once the requested configuration operation has completed, successfully or otherwise, this leaf will be set to the 'notInService' state by the managed entity. Setting this object to any other valid state from the 'active' state SHOULD cause the managed entity to cancel the requested operation at its earliest most rational opportunity. Setting this object to the 'active' state from the 'active' state SHOULD NOT have any affect. Conceptual rows that have been in the 'notInService' state for more than a device specific time period MAY be destroyed by the managed entity. - Cisco's Airline protocol support If P1024 Service Message Status Change
- alpsIfP1024ServMsgStatusChange 1.3.6.1.4.1.9.9.95.1.4.1.1.12 (defined in CISCO-ALPS-MIB)
Specifies whether service messages generated due to an ALPS circuit status change or an ASCU status change, will be forwarded to the ASCU. - Cisco ATM PVcl Status Change End
- catmPVclStatusChangeEnd 1.3.6.1.4.1.9.10.97.1.2.1.4 (defined in CISCO-ATM-PVCTRAP-EXTN-MIB)
The time stamp of the last state change of this PVCL in the last corresponding notification. - Cisco ATM PVcl End CC Status Change Start
- catmPVclEndCCStatusChangeStart 1.3.6.1.4.1.9.10.97.1.2.1.9 (defined in CISCO-ATM-PVCTRAP-EXTN-MIB)
The time stamp at which this PVCL changed state for the first time in the last corresponding notification due to End CC OAM failure. - Cisco ATM Status Change PVcl Range Index
- catmStatusChangePVclRangeIndex 1.3.6.1.4.1.9.10.97.1.3.1.1 (defined in CISCO-ATM-PVCTRAP-EXTN-MIB)
Index to represent different ranges, the first range is indexed by value 0, the second by 1 and so on... - Cisco ATM AISRDI Status Change PVcl Range Entry
- catmAISRDIStatusChPVclRangeEntry 1.3.6.1.4.1.9.10.97.1.7.1 (defined in CISCO-ATM-PVCTRAP-EXTN-MIB)
Each entry in this table represents a range of VCLs and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of 'pvc' and atmVclOperStatus to have changed due to AIS/RDI failure in the same direction in the last corresponding notification . - Cisco ATM PVcl AISRDI Range Status Change End
- catmPVclAISRDIRangeStatusChEnd 1.3.6.1.4.1.9.10.97.1.7.1.4 (defined in CISCO-ATM-PVCTRAP-EXTN-MIB)
The time stamp at which the last PVCL in the range changed state in the last corresponding notification due to AISRDI OAM failure. - Cisco Cluster Status Time Of Last Change
- ccStatusTimeOfLastChange 1.3.6.1.4.1.9.9.134.1.1.6 (defined in CISCO-CLUSTER-MIB)
The value of sysUpTime on the command switch when the last time the value of an instance of ccMemberOperStatus changed. The value 0 indicates that no member's status has ever changed since commander system initialization. - Cisco Digital Media Management System Ha Cluster Last Dmm Status Change Address
- cdmsHaClusterLastDmmStatusChangeAddress 1.3.6.1.4.1.9.9.655.1.10.3.3 (defined in CISCO-DIGITAL-MEDIA-SYSTEMS-MIB.)
The network address of the DMM node which changed status most recently in this cluster. The type of address of an instance of this object is determined by the value of the corresponding instance of 'cdmsHaClusterLastDmmStatusChangeAddrType' object. - Cisco Digital Media Management System Ha Cluster Last Status Change Vp Address Type
- cdmsHaClusterLastStatusChangeVpAddrType 1.3.6.1.4.1.9.9.655.1.10.3.6 (defined in CISCO-DIGITAL-MEDIA-SYSTEMS-MIB.)
This object indicates the type of the network address of the VP node which changed status most recently in this cluster (represented by the value of 'cdmsHaClusterLastVpStatusChangeAddress' object). A status change is defined as a transition in the value of the object 'cdmsHaVpClusterMemberOperState'. - Cisco Digital Media Management System Ha Cluster Last Vp Status Change Vp Address
- cdmsHaClusterLastVpStatusChangeVpAddress 1.3.6.1.4.1.9.9.655.1.10.3.7 (defined in CISCO-DIGITAL-MEDIA-SYSTEMS-MIB.)
The network address of the video portal node which changed status most recently in this cluster. The type of address of an instance of this object is determined by the value of the corresponding instance of 'cdmsHaClusterLastVpStatusChangeAddrType' object. - Cisco CISCO DOT11 CONTEXT SERVICES Status Change Time Stamp
- cDot11csStatusChangeTimeStamp 1.3.6.1.4.1.9.10.110.1.1.18.1.4 (defined in CISCO-DOT11-CONTEXT-SERVICES-MIB)
The value of sysUpTime at the time a state transition occurs in cDot11csStatusOperStatus. - Cisco Entity Field Replaceable Unit Control Module Status Last Change Time
- cefcModuleStatusLastChangeTime 1.3.6.1.4.1.9.9.117.1.2.1.1.4 (defined in CISCO-ENTITY-FRU-CONTROL-MIB)
The value of sysUpTime at the time the cefcModuleOperStatus is changed. - Cisco Flex Link Enable Status Change Notification
- cflEnableStatusChangeNotif 1.3.6.1.4.1.9.9.471.1.1.2 (defined in CISCO-FLEX-LINKS-MIB)
This variable indicates whether the system produces the cflIfStatusChangeNotif. A value of 'false' will prevent cflIfStatusChangeNotif. - HP ICF Vg Group Last Operation Status Change
- icfVgGroupLastOperStatusChange 1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.5 (defined in hp-icf)
An object that contains the value of sysUpTime at the time that the value of the icfVgGroupOperStatus object for this group last changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted. - HP ICF Vg Group Last Operation Status Change
- icfVgGroupLastOperStatusChange 1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.5 (defined in hpprocurve-icfvg)
An object that contains the value of sysUpTime at the time that the value of the icfVgGroupOperStatus object for this group last changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted. - HP ICF Vg Group Last Operation Status Change
- icfVgGroupLastOperStatusChange 1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.5 (defined in hpprocurve-v2-icfvg)
An object that contains the value of sysUpTime at the time that the value of the icfVgGroupOperStatus object for this group last changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted. - cmed Gateway Last Status Change
- cmedGatewayLastStatusChange 1.3.6.1.4.1.9.10.99999.1.1.2.1.11 (defined in CISCO-IETF-MEGACO-MIB)
The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. - Adtran Gen AOS Network Monitor Time Since Last Status Change
- adGenAOSnmTimeSinceLastStatusChange 1.3.6.1.4.1.664.5.53.2.2.4.1.7 (defined in ADTRAN-AOS-NETWORKMONITOR)
Time since last status change. - config Change Status
- configChangeStatus 1.3.6.1.4.1.351.110.2.1.19 (defined in ALCATEL-IND1-CONFIG-MGR-MIB)
The current state of the running configuration with respect to the saved configuration. - alarm Status Change
- alarmStatusChange 1.3.6.1.4.1.6302.2.1.4.1.3 (defined in EES-POWER-MIB)
The type of alarm change. One of (1) activated (2) deactivated
