The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for snrm
- aes Atuc Line Diag SNRM
- aesAtucLineDiagSNRM 1.3.6.1.4.1.890.1.5.11.1.3.3 (defined in ZYXEL-AESCOMMON-MIB)
Signal-to-Noise Ratio Margin. - aes Atur Line Diag SNRM
- aesAturLineDiagSNRM 1.3.6.1.4.1.890.1.5.11.1.3.8 (defined in ZYXEL-AESCOMMON-MIB)
Signal-to-Noise Ratio Margin. - sdlc Link Stations Statistics SNRM In
- sdlcLSStatsSNRMIn 1.3.6.1.2.1.41.1.2.3.1.33 (defined in rfc1747)
This object reflects the total number of set normal response mode (SNRM/SNRME) requests received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero. - sdlc Link Stations Statistics SNRM Out
- sdlcLSStatsSNRMOut 1.3.6.1.2.1.41.1.2.3.1.34 (defined in rfc1747)
This object reflects the total number of set normal response mode (SNRM/SNRME) requests transmited to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero. - ADSL2 L Configuration Profile Target Snrm Downstream
- adsl2LConfProfTargetSnrmDs 1.3.6.1.2.1.10.238.1.5.1.2.1.15 (defined in ADSL2-LINE-MIB)
The minimum Noise Margin the ATU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB). - ADSL2 L Configuration Profile Target Snrm Upstream
- adsl2LConfProfTargetSnrmUs 1.3.6.1.2.1.10.238.1.5.1.2.1.16 (defined in ADSL2-LINE-MIB)
The minimum Noise Margin the ATU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB). - ADSL2 L Configuration Profile Max Snrm Downstream
- adsl2LConfProfMaxSnrmDs 1.3.6.1.2.1.10.238.1.5.1.2.1.17 (defined in ADSL2-LINE-MIB)
The maximum Noise Margin the ATU-R receiver shall try to sustain. If the Noise Margin is above this level, the ATU-R shall request that the ATU-C reduce the ATU-C transmit power to get a noise margin below this limit (if this functionality is supported). The maximum noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB). A value of 0x7FFFFFFF (2147483647) means that there is no maximum. - ADSL2 L Configuration Profile Max Snrm Upstream
- adsl2LConfProfMaxSnrmUs 1.3.6.1.2.1.10.238.1.5.1.2.1.18 (defined in ADSL2-LINE-MIB)
The maximum Noise Margin the ATU-C receiver shall try to sustain. If the Noise Margin is above this level, the ATU-C shall request that the ATU-R reduce the ATU-R transmit power to get a noise margin below this limit (if this functionality is supported). The maximum noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB). A value of 0x7FFFFFFF (2147483647) means that there is no maximum. - ADSL2 L Configuration Profile Minimum Snrm Downstream
- adsl2LConfProfMinSnrmDs 1.3.6.1.2.1.10.238.1.5.1.2.1.19 (defined in ADSL2-LINE-MIB)
The minimum Noise Margin the ATU-R receiver shall tolerate. If the noise margin falls below this level, the ATU-R shall request that the ATU-C increase the ATU-C transmit power. If an increase to ATU-C transmit power is not possible, a loss-of-margin (LOM) defect occurs, the ATU-R shall fail and attempt to reinitialize, and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB). A value of 0 means that there is no minimum. - ADSL2 L Configuration Profile Minimum Snrm Upstream
- adsl2LConfProfMinSnrmUs 1.3.6.1.2.1.10.238.1.5.1.2.1.20 (defined in ADSL2-LINE-MIB)
The minimum Noise Margin the ATU-C receiver shall tolerate. If the noise margin falls below this level, the ATU-C shall request that the ATU-R increase the ATU-R transmit power. If an increase of ATU-R transmit power is not possible, a loss-of-margin (LOM) defect occurs, the ATU-C shall fail and attempt to reinitialize, and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (physical values are 0 to 31 dB). A value of 0 means that there is no minimum.
