The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for "receive port"
- dot1d Static Receive Port
- dot1dStaticReceivePort 1.3.6.1.2.1.17.5.1.1.2 (defined in BRIDGE-MIB)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry. - dot1q Static Unicast Receive Port
- dot1qStaticUnicastReceivePort 1.3.6.1.2.1.17.7.1.3.1.1.2 (defined in Q-BRIDGE-MIB)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. - dot1q Static Multicast Receive Port
- dot1qStaticMulticastReceivePort 1.3.6.1.2.1.17.7.1.3.2.1.2 (defined in Q-BRIDGE-MIB)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. - v Bridge Tp Fdb Receive Port Slot
- vBrdgTpFdbRcvPortSlot 1.3.6.1.4.1.800.2.2.4.3.1.3 (defined in XYLAN-VLAN-MIB)
The slot number of the port that vBrdgTpFdbAddress is received. - v Bridge Tp Fdb Receive Port IF
- vBrdgTpFdbRcvPortIF 1.3.6.1.4.1.800.2.2.4.3.1.4 (defined in XYLAN-VLAN-MIB)
The on-board interface number of the port that vBrdgTpFdbAddress is received. - v Bridge Tp Fdb Receive Port Function Type
- vBrdgTpFdbRcvPortFuncTyp 1.3.6.1.4.1.800.2.2.4.3.1.5 (defined in XYLAN-VLAN-MIB)
The service type of the port that vBrdgTpFdbAddress is received. - v Bridge Tp Fdb Receive Port Function Type Instance
- vBrdgTpFdbRcvPortFuncTypInst 1.3.6.1.4.1.800.2.2.4.3.1.6 (defined in XYLAN-VLAN-MIB)
The service type instance of the port that vBrdgTpFdbAddress is received. - dot1d Static Receive Port
- dot1dStaticReceivePort 1.3.6.1.2.1.17.5.1.1.2 (defined in rfc1493)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry. - Cabletron Bridge Sdb Ethernet IO Receive Port
- ctBridgeSdbEnetIORcvPort 1.3.6.1.4.1.52.4.1.2.3.5.4.1.2 (defined in ctron-bridge-mib)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '0' indicates that this entry applies on all ports of the bridge for which there is no other applicable entry. - Cabletron Bridge Sdb Token Ring IO Receive Port
- ctBridgeSdbTrIORcvPort 1.3.6.1.4.1.52.4.1.2.3.6.4.1.2 (defined in ctron-bridge-mib)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '0' indicates that this entry applies on all ports of the bridge for which there is no other applicable entry. - Cabletron Bridge Sdb Generic IO Receive Port
- ctBridgeSdbGenericIORcvPort 1.3.6.1.4.1.52.4.1.2.3.9.4.1.2 (defined in ctron-bridge-mib)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '0' indicates that this entry applies on all ports of the bridge for which there is no other applicable entry. - Enterasys Extended Switch Protocol Receive Port
- etsysESwitchProtocolReceivePort 1.3.6.1.4.1.5624.1.2.10.1.4.2.1.1 (defined in enterasys-eswitch-mib)
Identifies the receive port to which the protocol filter is to be applied. The value '0' (when allowed) represents 'all ports'. - Cisco Bridge Dot1d Static Receive Port
- cbeDot1dStaticReceivePort 1.3.6.1.4.1.9.9.401.1.2.1.1.3 (defined in CISCO-BRIDGE-EXT-MIB)
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
