The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for protection
- Network NLM Protection Domain
- nwNLMProtectionDomain 1.3.6.1.4.1.23.2.28.9.1.1.6 (defined in NetWare-Server-MIB)
The protection level at which this NLM is executing. - x25 Call Parm Protection
- x25CallParmProtection 1.3.6.1.2.1.10.5.9.1.26 (defined in rfc1382)
A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex to the octets actually in the packet by the agent. The agent will supply the length field and the length octet is not contained in this string. An string containing the 3 characters DEF for a circuit means use the PLE default (the entry for the PLE default parameters may not use the value DEF). A zero length string mean no facility requested. - Accounting Protection
- acctngProtection 1.3.6.1.4.1.9.10.17.1.3.3 (defined in ACCOUNTING-CONTROL-MIB)
A control object to protect against duplication of control commands. Over some transport/network protocols, it is possible for SNMP messages to get duplicated. Such duplication, if it occurred at just the wrong time could cause serious disruption to the collection and retrieval of accounting data, e.g., if a SNMP message setting acctngFileCommand to 'swapToNewFile' were to be duplicated, a whole file of accounting data could be lost. To protect against such duplication, a management application should retrieve the value of this object, and include in the Set operation needing protection, a variable binding which sets this object to the retrieved value. - ADSL2 Channel Configuration Profile Minimum Protection Downstream
- adsl2ChConfProfMinProtectionDs 1.3.6.1.2.1.10.238.1.5.2.1.1.11 (defined in ADSL2-LINE-MIB)
Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol. - ADSL2 Channel Configuration Profile Minimum Protection Upstream
- adsl2ChConfProfMinProtectionUs 1.3.6.1.2.1.10.238.1.5.2.1.1.12 (defined in ADSL2-LINE-MIB)
Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol. - Cisco DOT11 Ht Mac Dual CTS Protection
- cD11HtMacDualCTSProtection 1.3.6.1.4.1.9.9.626.1.2.1.1.5 (defined in CISCO-DOT11-HT-MAC-MIB)
This object, when set to 'true', indicates that the AP uses dual CTS protection to protect the regular and the STBC transmissions. - Cisco DOT11 Ht Mac L Sig Tx Operation Full Protection Enabled
- cD11HtMacLSigTxOpFullProtectionEnabled 1.3.6.1.4.1.9.9.626.1.2.1.1.6 (defined in CISCO-DOT11-HT-MAC-MIB)
This object, when set to 'true', indicates that the LSIG-TXOP Protection is currently enabled on the AP.
