The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port timing
- atmx Port Timing Mode
- atmxPortTimingMode 1.3.6.1.4.1.800.2.4.1.1.1.22 (defined in XYLAN-ATM-MIB)
Timing mode to use. Use local timing or loop timing. - qsim Port Term Timing Source
- qsimPortTermTimingSource 1.3.6.1.4.1.43.1.12.3.1.1.12.2.1.1.3 (defined in 3comab9300)
Terminal timing source. This object applies ONLY when a DCE cable is connected to the port. If cable type is 'none' or 'dce', this object can be read and written. If cable type is 'dte', a get request returns whatever value currently stored in the managed node for this port and a set request returns genErr. - qsim Port Receive Timing Phase
- qsimPortReceiveTimingPhase 1.3.6.1.4.1.43.1.12.3.1.1.12.2.1.1.4 (defined in 3comab9300)
Receive timing phase control. This object applies ONLY when a DCE cable is connected to the port. If cable type is 'none' or 'dce', this object can be read and written. If cable type is 'dte', a get request returns whatever value currently stored in the managed node for this port and a set request returns genErr. - cbr DS1E1 Port Configuration Timing
- cbrDS1E1PortConfTiming 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1.5 (defined in 3comab9300)
This object indicates the type of input clock service configured for the specified T1/E1 port interface. Synchronous Residual Time Stamp (SRTS) and Adaptive timing modes are ONLY available in unstructured mode. System configures the port interface to use the system reference clock within the shelf as a reference for transmitting. Loop uses the input port Rx clock as the timing source. An error is returned if an access is attempted to set this object in an inappropriate port mode (eg. SRTS is applied in structured voice mode). The default value is adaptive (4). - cbr V35 Port Configuration Rx Timing Source
- cbrV35PortConfRxTimingSource 1.3.6.1.4.1.43.1.12.3.1.1.15.5.1.1.9 (defined in 3comab9300)
This object indicates the Serial interface Recieive Timing Source. The default value is dce-transmit-clock. - oc3 Port Timing
- oc3PortTiming 1.3.6.1.4.1.43.1.12.3.1.1.16.1.1.1.4 (defined in 3comab9300)
OC3 timing source. - ima Port Timing
- imaPortTiming 1.3.6.1.4.1.43.1.12.3.1.1.19.2.1.1.4 (defined in 3comab9300)
This object indicates the input clock service type configured for the port. - ds3 Port Timing
- ds3PortTiming 1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.7 (defined in C-PRODUCT-DS3-MIB)
DS3 timing source. - ds3 Port Plcp Timing
- ds3PortPlcpTiming 1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.8 (defined in C-PRODUCT-DS3-MIB)
PLCP timing source for the DS3 port. - ds3 Port Ctx Timing
- ds3PortCtxTiming 1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.9 (defined in C-PRODUCT-DS3-MIB)
CTX timing source from the DS3 port. - e3 Port Timing
- e3PortTiming 1.3.6.1.4.1.43.1.12.3.1.1.13.1.1.1.5 (defined in C-PRODUCT-E3-MIB)
E3 timing source. - e3 Port Plcp Timing
- e3PortPlcpTiming 1.3.6.1.4.1.43.1.12.3.1.1.13.1.1.1.6 (defined in C-PRODUCT-E3-MIB)
PLCP timing source for the E3 port. - e3 Port Ctx Timing
- e3PortCtxTiming 1.3.6.1.4.1.43.1.12.3.1.1.13.1.1.1.7 (defined in C-PRODUCT-E3-MIB)
CTX timing source for the E3 port.
