The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port operation status
- atmx Port Operation Status
- atmxPortOperStatus 1.3.6.1.4.1.800.2.4.1.1.1.7 (defined in XYLAN-ATM-MIB)
The operational state (i.e., actual) of this port. The ILMI should not alarm on a physical interface for when the value of this object is outOfService(3). This capability is useful if the equipment is to be disconnected, or for troubleshooting purposes. A value of loopBack(4) indicates that a local loopback is in place. - port Operation Status
- portOperStatus 1.3.6.1.4.1.43.1.12.3.1.1.4.1.1.4 (defined in 3comab9300)
Operational status of the port. - Character Port Operation Status
- charPortOperStatus 1.3.6.1.2.1.19.2.1.7 (defined in rfc1316)
The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for administrative or operational reasons. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test. 'absent' indicates that port hardware is not present. 'active' indicates up with a user present (e.g. logged in). - Repeater Port Operation Status
- rptrPortOperStatus 1.3.6.1.2.1.22.1.3.1.1.5 (defined in rfc1516)
This object indicates the port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible depending on the type of port.) The operational(1) status indicates that the port is enabled (see rptrPortAdminStatus) and working, even though it might be auto-partitioned (see rptrPortAutoPartitionState). If this object has the value operational(1) and rptrPortAdminStatus is set to disabled(2), it is expected that this object's value will soon change to notOperational(2). - Character Port Operation Status
- charPortOperStatus 1.3.6.1.2.1.19.2.1.7 (defined in rfc1658)
The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for administrative or operational reasons. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test. 'absent' indicates that port hardware is not present. 'active' indicates up with a user present (e.g. logged in). 'up' and 'active' correspond to ifOperStatus 'up'. 'down' and 'absent' correspond to ifOperStatus 'down'. 'maintenance' corresponds to ifOperStatus 'test'. - Cabletron Bridge Load Share Port Operation Status
- ctBridgeLoadSharePortOperStatus 1.3.6.1.4.1.52.4.1.2.3.10.2.1.4 (defined in ctron-bridge-mib)
The operational state of the port associated with this instance of load share. - Cabletron DLSw Port Operation Status
- ctdlswPortOperStatus 1.3.6.1.4.1.52.4.1.2.8.2.1.1.5 (defined in ctron-dlsw-mib)
Specifies the current operating status of DLSw frame forwarding for this port. - sfps In Port Config Operation Status
- sfpsInPortConfigOperStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3 (defined in ctron-sfps-port-mib)
Indicates the current operating condition of the SFPS on the inbound switch port for which this entry exists. - sfps Out Port Config Operation Status
- sfpsOutPortConfigOperStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3 (defined in ctron-sfps-port-mib)
Indicates the current operating condition of the SFPS on the outbound switch port for which this entry exists. - garp Port Operation Status
- garpPortOperationStatus 1.3.6.1.4.1.52.4.2.12.1.3.2.2.1.3 (defined in garp-mib)
The port operational status for this application. A 1 represents enabled and 2 represents disabled. - Cisco ATM Forum Port Operation Status
- atmfPortOperStatus 1.3.6.1.4.1.353.2.1.1.1.5 (defined in ATM-FORUM-MIB)
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
