The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for "port name"
- xylan Filter Ip Service Port Name
- xylanFltIpServicePortName 1.3.6.1.4.1.800.2.22.3.1.1.1 (defined in XYLAN-FLT-MIB)
Name of service for HRE-X Filtering Engine. - Character Port Name
- charPortName 1.3.6.1.2.1.19.2.1.2 (defined in rfc1316)
An administratively assigned name for the port, typically with some local significance. - IBM APPN Node Port Name
- ibmappnNodePortName 1.3.6.1.4.1.2.6.2.13.1.4.1.1.1 (defined in rfc1593)
Administratively-assigned name for this APPN port. The name can be from one to eight characters. - IBM APPN Node Port Dlc Trace Port Name
- ibmappnNodePortDlcTracPortName 1.3.6.1.4.1.2.6.2.13.1.4.5.1.1 (defined in rfc1593)
The Port name associated with this this trace table entry. - IBM APPN Node Link Stations Port Name
- ibmappnNodeLsPortName 1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 (defined in rfc1593)
Administratively-assigned name for the port. The name can be from one to eight characters. - Character Port Name
- charPortName 1.3.6.1.2.1.19.2.1.2 (defined in rfc1658)
An administratively assigned name for the port, typically with some local significance. - Compaq Fibre Array Fibre Channel Switch World Wide Port Name
- cpqFcSwitchWorldWidePortName 1.3.6.1.4.1.232.16.4.1.1.1.6 (defined in CPQFCA)
Compaq Fibre Channel Switch World Wide Port Name. This value can be used to further identify a particular controller. If the world wide port name is not supported, the agent will return a NULL string. - els100 Port Name
- els100PortName 1.3.6.1.4.1.52.1011.2.1.6 (defined in ctels100-ng-mib)
A descriptive string of up to 60 characters used by the network administrator to name the port. - Network Appn Ext If Port Name
- nwAppnExtIfPortName 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.2 (defined in ctron-appn-mib)
Specifies the user friendly name for this port. - Network Appn Forward Link Station Port Name
- nwAppnFwdLsPortName 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.6 (defined in ctron-appn-mib)
This link station port name corresponds to the port name index into the the nwAppnExtensionTable which describes the router port on which the adjacent link station is defined. - bdg Port Name
- bdgPortName 1.3.6.1.4.1.173.7.9.1.2.2 (defined in ctron-bdg-mib)
The user-defined name assigned to the port. The default port 1 name is PORT_1 and the default Port 2 name is PORT_2. - Cabletron CDP Neighbor Port Name
- ctCDPNeighborPortName 1.3.6.1.4.1.52.4.1.2.19.1.3.1.9 (defined in ctron-cdp-mib)
The value of object ifName of the neighbor's port. - Cabletron DLSw Port Name
- ctdlswPortName 1.3.6.1.4.1.52.4.1.2.8.2.1.1.2 (defined in ctron-dlsw-mib)
Specifies the user friendly name for this port. - sfps Path API Port Name
- sfpsPathAPIPortName 1.3.6.1.4.1.52.4.2.4.2.2.2.4.5.3.3 (defined in ctron-sfps-path-mib)
- vlan Sflsp Neighbors Port Name
- vlanSflspNeighborsPortName 1.3.6.1.4.1.52.4.2.12.1.2.7.5.1.1.1 (defined in ctron-sfps-sflsp-mib)
A 10 byte octet string uniquely identifying the neighbor's port address. By convention, to ensure uniqueness the first six bytes should default to the base mac address and the last four bytes should default to the port number of the neighbor's interface. - sfps Topology Server Test Port Name
- sfpsTopologyServerTestPortName 1.3.6.1.4.1.52.4.2.4.2.2.3.12.5.2.2.1.4 (defined in ctron-sfps-topology-mib)
SwitchId or PortName of neighboring switch - sfps Topology Server Test Topology Relay Port Name
- sfpsTopologyServerTestTopRelayPortName 1.3.6.1.4.1.52.4.2.4.2.2.3.12.5.2.3.1.6 (defined in ctron-sfps-topology-mib)
- Token Ring Port Management Port Name
- tRingPortMgmtPortName 1.3.6.1.4.1.52.4.1.2.1.1.3.1.1.1.3 (defined in dot5-log-mib)
Gets/Sets an ASCII name for this port. The default name for this object is 'Board b, Port p', where b and p are integers 1 through n. - dot5 Physical Management Port Common Port Name
- dot5PhysMgmtPortCommonPortName 1.3.6.1.4.1.52.4.1.1.6.1.3.1.1.1.3 (defined in dot5-phys-mib)
Sets an ASCII name for this token ring port, provided the MIM on which this port is resident falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. The default name for this object is 'Board b, Port p', where b and p are unique integers 1 through n. When read, this object will return the ASCII name which is assigned to this port. - port Name
- portName 1.3.6.1.4.1.52.4.12.30.1.2.1.1.2 (defined in irm3-mib)
The name of the port. this field will only contain printable ASCII characters. - port Name
- portName 1.3.6.1.4.1.52.4.12.30.1.2.1.1.2 (defined in v2h124-24-mib)
in the IF-MIB (RFC2863 or later). - appn Port Name
- appnPortName 1.3.6.1.2.1.34.4.1.1.4.1.1.1 (defined in APPN-MIB)
Administratively assigned name for this APPN port. - appn Link Station Port Name
- appnLsPortName 1.3.6.1.2.1.34.4.1.1.5.1.1.4 (defined in APPN-MIB)
Administratively assigned name for the port associated with this link station. The name can be from one to ten characters. - appn Vrn Port Name
- appnVrnPortName 1.3.6.1.2.1.34.4.1.1.6.1.1.3 (defined in APPN-MIB)
The name of the port this virtual routing node definition is defined to. - appn Local Transmission Group Port Name
- appnLocalTgPortName 1.3.6.1.2.1.34.4.1.3.1.1.5 (defined in APPN-MIB)
Administratively assigned name for the local port associated with this TG. A zero-length string indicates that this value is unknown. - Cisco Network Office Switch Port Name
- cnosPortName 1.3.6.1.4.1.9.10.43.1.3.1.1.2 (defined in CISCO-CNO-SWITCH-MIB)
A descriptive string of up to 80 characters used by the network administrator to name a port.
