The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port idle
- m013 Dsx3 Mdl Port Idle Signal Code
- m013Dsx3MdlPortIdleSignalCode 1.3.6.1.4.1.800.2.25.10.1.1.8 (defined in XYLAN-M013-MIB)
MDL Port Idle Signal Code - m013 Dsx3 Rx Mdl Port Idle Signal Code
- m013Dsx3RxMdlPortIdleSignalCode 1.3.6.1.4.1.800.2.25.10.1.1.21 (defined in XYLAN-M013-MIB)
Received MDL Port Idle Signal Code - ds3 Port Idle Unassigned Cells
- ds3PortIdleUnassignedCells 1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.3 (defined in C-PRODUCT-DS3-MIB)
The counter associated with the idle/unassigned cells, encountered on the ATM interface. - e3 Port Idle Unassigned Cells
- e3PortIdleUnassignedCells 1.3.6.1.4.1.43.1.12.3.1.1.13.2.1.1.3 (defined in C-PRODUCT-E3-MIB)
The counter associated with the idle/unassigned cells, encountered on the ATM interface. - rs232 Sync Port Idle Pattern
- rs232SyncPortIdlePattern 1.3.6.1.2.1.10.33.4.1.13 (defined in rfc1659)
The bit pattern used to indicate an idle line. - port Sdlc Admin Idle Fill Character
- portSdlcAdminIdleFillChar 1.3.6.1.4.1.173.7.3.5.1.1.14 (defined in netlink-specific-mib)
This object specifies a character that wll be inserted into the stream when the SNA link is idle. - port Sdlc Operation Idle Fill Character
- portSdlcOperIdleFillChar 1.3.6.1.4.1.173.7.3.5.2.1.13 (defined in netlink-specific-mib)
This object specifies a character that wll be inserted into the stream when the SNA link is idle. - cnat Address Port Bind Current Idle Time
- cnatAddrPortBindCurrentIdleTime 1.3.6.1.4.1.9.10.77.1.2.4.1.11 (defined in CISCO-IETF-NAT-MIB)
At any given instance of time, this object indicates the time that this BIND has been idle with no sessions attached to it. The value represented by this object is of relevance only when the value of Maximum Idle time (cnatConfMaxBindIdleTime) is non-zero. - Adtran Frame Perform Interval Port Idle Util Rx
- adFRPerformIntPortIdleUtilRx 1.3.6.1.4.1.664.4.1.4.1.1.20 (defined in ADTRAN-FRPerform-MIB)
The number of (bytes/sec) samples that no data was received. - Adtran Frame Perform Interval Port Idle Util Tx
- adFRPerformIntPortIdleUtilTx 1.3.6.1.4.1.664.4.1.4.1.1.21 (defined in ADTRAN-FRPerform-MIB)
The number of (bytes/sec) samples that no data was transmitted. - Adtran Frame Perform Day Port Idle Util Rx
- adFRPerformDayPortIdleUtilRx 1.3.6.1.4.1.664.4.1.8.1.1.20 (defined in ADTRAN-FRPerform-MIB)
The number of (bytes/sec) samples that no data was received. - Adtran Frame Perform Day Port Idle Util Tx
- adFRPerformDayPortIdleUtilTx 1.3.6.1.4.1.664.4.1.8.1.1.21 (defined in ADTRAN-FRPerform-MIB)
The number of (bytes/sec) samples that no data was transmitted. - nat Addr Port Bind Max Idle Time
- natAddrPortBindMaxIdleTime 1.3.6.1.2.1.123.1.8.1.13 (defined in NAT-MIB)
This object indicates the maximum time for which this bind can be idle without any sessions attached to it. The value of this object is of relevance only for dynamic NAT. - nat Addr Port Bind Current Idle Time
- natAddrPortBindCurrentIdleTime 1.3.6.1.2.1.123.1.8.1.14 (defined in NAT-MIB)
At any given instance, this object indicates the time that this bind has been idle without any sessions attached to it. The value of this object is of relevance only for dynamic NAT.
