The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port framing
- dsx1 Port Statistics Framing Bit Error
- dsx1PortStatsFramingBitError 1.3.6.1.4.1.800.2.11.1.2.1.16 (defined in XYLAN-DS1-MIB)
Total number of Framing Bit Error events that have been detected on this port. - dsx3 Port Statistics Framing Bit Error
- dsx3PortStatsFramingBitError 1.3.6.1.4.1.800.2.11.2.2.1.10 (defined in XYLAN-DS3-MIB)
Total number of Framing Bit Error events that have been detected on this port. - dsx3 Port Statistics Plcp Framing Error
- dsx3PortStatsPlcpFramingError 1.3.6.1.4.1.800.2.11.2.2.1.18 (defined in XYLAN-DS3-MIB)
Total number of PLCP Framing Octet Errors that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. - dsx3 Port Interval Framing Bit Error
- dsx3PortIntervalFramingBitError 1.3.6.1.4.1.800.2.11.2.3.1.12 (defined in XYLAN-DS3-MIB)
Total number of Framing Bit Error events that have been detected on this port since it's cleared by the managing station. - dsx3 Port Interval Plcp Framing Error
- dsx3PortIntervalPlcpFramingError 1.3.6.1.4.1.800.2.11.2.3.1.20 (defined in XYLAN-DS3-MIB)
Total number of PLCP Framing Octet Errors that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP. - cbr DS1E1 Port Configuration Framing
- cbrDS1E1PortConfFraming 1.3.6.1.4.1.43.1.12.3.1.1.15.2.1.1.4 (defined in 3comab9300)
This object indicates the type of frame organization configured for the specified T1/E1 port interface. D4 and ESF frame organizations apply to T1 interfaces ONLY. Single-frame and multi-frame organizations pertain to E1 interfaces ONLY. An error is returned if a set is applied to an inappropriate cardtype (eg. T1-D4 is applied to an E1 cardtype). Unframed is not a valid configuration in a structured mode. The E1 interface will not allow framing to be changed in structured voice mode. Changing the framing configuration for an E1 interface will cause the following parameters to be changed in unstructured and structured data modes. . signaling crc-4 . --------- ----- . E1 unframed disable disable . single-frame disable* disable . multi-frame enable* enable * signaling is automatically changed in unstructured mode only The default value is unframed (1). - ima Port Framing
- imaPortFraming 1.3.6.1.4.1.43.1.12.3.1.1.19.2.1.1.3 (defined in 3comab9300)
This object indicates the framing format configured for the port. - ds3 Port Framing
- ds3PortFraming 1.3.6.1.4.1.43.1.12.3.1.1.11.1.1.1.4 (defined in C-PRODUCT-DS3-MIB)
Cbit or M23 framing for the DS3 port. - rs232 Asynchronous Port Framing Errors
- rs232AsyncPortFramingErrs 1.3.6.1.2.1.10.33.3.1.7 (defined in rfc1317)
Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'. - rs232 Asynchronous Port Framing Errors
- rs232AsyncPortFramingErrs 1.3.6.1.2.1.10.33.3.1.7 (defined in rfc1659)
Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'. - port T1 Admin Framing Mode
- portT1AdminFramingMode 1.3.6.1.4.1.173.7.3.7.1.1.3 (defined in netlink-specific-mib)
24 channelized T1. - port T1 Admin Protocol Framing
- portT1AdminProtocolFraming 1.3.6.1.4.1.173.7.3.7.1.1.8 (defined in netlink-specific-mib)
::= { portT1AdminEntry 8 } SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION " - port T1 Operation Framing Mode
- portT1OperFramingMode 1.3.6.1.4.1.173.7.3.7.2.1.3 (defined in netlink-specific-mib)
24 channelized T1.
