The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for operation type
- tsm Operation Port Config Type
- tsmOperPortConfigType 1.3.6.1.4.1.800.2.19.1.2.1.1.6 (defined in TSMEXT-MIB)
The operational config-type of the port. 1 = auto. Automatically set the port's ring speed, mode and duplex parameters. 2 = fixed. Use customer defined values for the port's ring speed, mode and duplex parameters. - lapb Operation Station Type
- lapbOperStationType 1.3.6.1.2.1.10.16.2.1.2 (defined in rfc1381)
Identifies the current operating station type of this interface. A value of dxe (3) indicates XID negotiation has not yet taken place. - sna Node Operation Type
- snaNodeOperType 1.3.6.1.2.1.34.1.1.3.1.2 (defined in rfc1666)
The value identifies the current type of the Node. - sna Lu Operation Dep Type
- snaLuOperDepType 1.3.6.1.2.1.34.1.2.2.1.4 (defined in rfc1666)
The value identifies whether the LU is currently dependent or independent. A write operation to this object will not change the operational value reflected in snaLuOperDepType until the Node has been re-activated (e.g., after the next initialization of the SNA services). - sdlc Port Operation Type
- sdlcPortOperType 1.3.6.1.2.1.41.1.1.2.1.3 (defined in rfc1747)
This parameter defines whether the SDLC port is currently operating as though connected to a leased or switched line. - Cabletron Wan HDSL Loopbacks Operation Type
- ctWanHDSLLoopbacksOperType 1.3.6.1.4.1.52.4.1.2.7.1.8.7.1.3 (defined in ctron-wan-mib)
This is the operational loopback type for the HDSL. loopbacks setting: 1 : Smartjack - loopback to network at remote line unit. 2 : Loopback to network at local line unit. 3 : Loopback to network at remote line unit. 4 : Loopback to customer at local line unit. 5 : Loopback to customer at remote line unit. 6 : Loopback to customer at first doubler. 7 : Loopback to customer at second doubler. 8 : Loopback to network at first doubler. 9 : Loopback to network at second doubler. 10: No loopback (turn loopback off). - garp Port Operation Application Type
- garpPortOperationAppType 1.3.6.1.4.1.52.4.2.12.1.3.2.2.1.1 (defined in garp-mib)
Protocol that this operation status belongs to. A 1 represents GMRP and 2 represents GVRP. - port Bsci Operation Pad Type
- portBsciOperPadType 1.3.6.1.4.1.173.7.3.4.2.1.9 (defined in netlink-specific-mib)
BSCI Pad Type - port Voice Operation Forwarded Type
- portVoiceOperForwardedType 1.3.6.1.4.1.173.7.3.8.2.1.28 (defined in netlink-specific-mib)
The method how the dial digits will be forwarded. This is applicable only when forwarded output digits is all or extended. - port Voice Operation Tone Type
- portVoiceOperToneType 1.3.6.1.4.1.173.7.3.8.2.1.34 (defined in netlink-specific-mib)
The tone type to detect/regenerate for forwarding DTMF/MF. - file Copy Source Operation Type
- fileCopySrcOperType 1.3.6.1.4.1.52.4.12.30.1.24.1.1 (defined in v2h124-24-mib)
fileCopyDestOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOperType'. file(1) means we want to perform the 'copy file fileCopyDestType' operation, runningCfg(2) means we want to perform the 'copy running-config fileCopyDestOperType' operation, startUpCfg(3) means we want to perform the 'copy startup-config fileCopyDestOperType' operation, tftp(4) means we want to perform the 'copy tftp fileCopyDestOperType' operation, unit(5) is only available in stacking system, in which we can copy files from one unit to another unit and it means we want to perform the 'copy unit fileCopyDestOperType' operation. The possible permutations is as follow: (1)copy file file (2)copy file runningCfg (3) copy file startUpCfg (4)copy file tftp (5) copy file unit(for stacking system only) (6)copy runningCfg file (7)copy runningCfg startUpCfg (8)copy runningCfg tftp (9)copy startupCfg file (10)copy startupCfg runningCfg (11)copy startupCfg tftp (12)copy tftp file (13)copy tftp runningCfg (14)copy tftp startUpCfg (15)copy unit file. - file Copy Destination Operation Type
- fileCopyDestOperType 1.3.6.1.4.1.52.4.12.30.1.24.1.3 (defined in v2h124-24-mib)
fileCopySrcOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOperType'. file(1) means we want to perform the 'copy fileCopySrcType file ' operation, runningCfg(2) means we want to perform the 'copy fileCopySrcOperType running-config ' operation, startUpCfg(3) means we want to perform the 'copy fileCopySrcOperType startup-config ' operation, tftp(4) means we want to perform the 'copy fileCopySrcOperType tftp' operation, unit(5) is only available in stacking system, in which we can copy files from one unit to another unit and it means we want to perform the 'copy fileCopySrcOperType unit' operation. The possible permutations is as follow: (1)copy file file (2)copy file runningCfg (3) copy file startUpCfg (4)copy file tftp (5) copy file unit(for stacking system only) (6)copy runningCfg file (7)copy runningCfg startUpCfg (8)copy runningCfg tftp (9)copy startupCfg file (10)copy startupCfg runningCfg (11)copy startupCfg tftp (12)copy tftp file (13)copy tftp runningCfg (14)copy tftp startUpCfg (15)copy unit file. - Enterasys SSH Server Operation Key Type
- etsysSshOperKeyType 1.3.6.1.4.1.5624.1.2.26.1.5.4 (defined in enterasys-ssh-server-mib)
Indicates the type of the key pair currently in effect on the managed entity. The value of the etsysSshAdminKeyType object is copied to the etsysSshOperKeyType object upon successful completion of the (re)creation of a key pair. A value of none indicates that due to the failure of the initial key pair generation there is no active key pair. - Enterasys Transport Layer Security Operation Key Type
- etsysTlsOperKeyType 1.3.6.1.4.1.5624.1.2.30.1.3.3 (defined in enterasys-tls-mib)
Indicates the type of the key pair currently in effect on the managed entity. The value of the etsysTlsAdminKeyType object is copied to the etsysTlsOperKeyType object upon successful completion of the (re)creation of a key pair. - Cisco Channel Interface Processor Transmission Groups Cmgr Operation Type
- cipTgCmgrOperType 1.3.6.1.4.1.9.9.73.1.3.1.1.2 (defined in CISCO-CIPTG-MIB)
Type of Connection Manager for TG. pointToPoint - One MPC+ connection per TG is supported between the host and the CMCC. pointToMultiPoint - Multiple MPC+ connections per TG are supported between the host and the CMCC. - Cisco DLSW T Connection Operation T Domain Type
- cdeTConnOperTDomainType 1.3.6.1.4.1.9.9.74.1.3.2.1.5 (defined in CISCO-DLSW-EXT-MIB)
The type of DLSw encapsulation in use on this peer connection. - Cisco DSPU Pu Operation Type
- dspuPuOperType 1.3.6.1.4.1.9.9.24.1.4.2.1.3 (defined in CISCO-DSPU-MIB)
PU type is either upstream or downstream. - Cisco DSPU Pu Operation Dlc Type
- dspuPuOperDlcType 1.3.6.1.4.1.9.9.24.1.4.2.1.14 (defined in CISCO-DSPU-MIB)
DLC type used by the dspuNode for link activation with the remote PU. - Cisco DSPU Lu Operation Type
- dspuLuOperType 1.3.6.1.4.1.9.9.24.1.5.2.1.2 (defined in CISCO-DSPU-MIB)
LU type is either pooled or dedicated. - Fibre Channel Management Port Operation Type
- cfcmPortOperType 1.3.6.1.4.1.9.10.999999.1.3.1.5 (defined in CISCO-FC-MGMT-MIB)
The current operational type of this port. - Cisco Fabric Device Management Interface Notify Registration Operation Type
- cfdmiNotifyRegOperType 1.3.6.1.4.1.9.9.373.1.2.5 (defined in CISCO-FDMI-MIB)
The type of registration operation. 'regHBA' - register HBA. 'regHAT' - register HBA attributes. 'regPRT' - register port. 'regPA' - register port attributes. - vrrp Operation Authentication Type
- vrrpOperAuthType 1.3.6.1.2.1.68.1.3.1.9 (defined in ibm-vrrp)
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. - Switch L3 Vrrp Operation Authentication Type
- swL3VrrpOperAuthType 1.3.6.1.4.1.171.11.70.5.3.14.1.1.10 (defined in DES3528-SWL3MGMT-MIB)
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track. - Switch L3 Vrrp Operation Authentication Type
- swL3VrrpOperAuthType 1.3.6.1.4.1.171.11.70.5.3.14.1.1.10 (defined in DES3552-SWL3MGMT-MIB)
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track. - Switch L3 Vrrp Operation Authentication Type
- swL3VrrpOperAuthType 1.3.6.1.4.1.171.11.70.5.3.14.1.1.10 (defined in DES3612-SWL3MGMT-MIB)
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track. - Switch L3 Vrrp Operation Authentication Type
- swL3VrrpOperAuthType 1.3.6.1.4.1.171.11.70.5.3.14.1.1.10 (defined in DES3627-SWL3MGMT-MIB)
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track. - Switch L3 Vrrp Operation Authentication Type
- swL3VrrpOperAuthType 1.3.6.1.4.1.171.11.70.5.3.14.1.1.10 (defined in DES3650-SWL3MGMT-MIB)
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track.
