The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for number ports
- dot1d Base Number Ports
- dot1dBaseNumPorts 1.3.6.1.2.1.17.1.2 (defined in BRIDGE-MIB)
The number of ports controlled by this bridging entity. - dot1d Base Number Ports
- dot1dBaseNumPorts 1.3.6.1.2.1.17.1.2 (defined in rfc1493)
The number of ports controlled by this bridging entity. - Cabletron Virtual If Number Ports
- ctVirtualIfNumPorts 1.3.6.1.4.1.52.4.3.3.7.1.1.4 (defined in ctif-ext-mib)
This value displays the number of virtual ports. - BDG Device Number Ports
- bdgdeviceNumPorts 1.3.6.1.4.1.173.7.9.1.1.5 (defined in ctron-bdg-mib)
The number of ports present on the bridge. - Cabletron Bridge Load Share Port Number Ports
- ctBridgeLoadSharePortNumPorts 1.3.6.1.4.1.52.4.1.2.3.10.2.1.7 (defined in ctron-bridge-mib)
Displays the number of SmartTrunk ports in this redundant path. - sfps ATM Ports Base Interface Number
- sfpsATMPortsBaseIntfNum 1.3.6.1.4.1.52.4.2.4.2.4.5.1.1.5 (defined in ctron-sfps-esys-mib)
- sys Hw Module Number Ports
- sysHwModuleNumPorts 1.3.6.1.4.1.52.2501.1.1.2.1.4 (defined in ctron-ssr-hardware-mib)
The number of physical ports on this Card/Module. - wan Connection Number Physical Ports
- wanConnNumPhysPorts 1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.2 (defined in ctron-wan-mib)
The number of physical ports that exist on this wan connection. - interface Number Of Ports Per Line
- interfaceNumOfPortsPerLine 1.3.6.1.4.1.351.110.2.2.1.1.3 (defined in BASIS-GENERIC-MIB)
The number of physical ports of the line type. VISM has a port, but is not linked to these physical lines, hence value=0 is returned. DEFVAL {672} ::= { interfaceLineEntry 3 } SYNTAX INTEGER { other(1), ethernet-3Mbit (26), slip (28), frameRelay(32), atm(37), voice(42) } ACCESS read-only STATUS mandatory DESCRIPTION The services available on the interfaceLineType object ::= { interfaceLineEntry 4 } SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION The Max number of Permanent Virtual Channels available per physical line (line as defined in interfaceLineType). VISM has a PVC but is not linked to the lines, hence value=0 is returned. ::= { interfaceLineEntry 5 } SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION The Max number of Queues per port. Value=0 is returned for VISM card. ::= { interfaceLineEntry 6 } -- ---------------------------------------------------------------- -- -- Group "cardTest This object indicates the self test state 1 ==> self test enabled 2 ==> self test disabled DEFVAL { disable } ::= { cardSelfTest 1 } SYNTAX INTEGER (1..60) ACCESS read-write STATUS mandatory DESCRIPTION Interval (in minutes) for self test. DEFVAL { 1 } ::= { cardSelfTest 2 } SYNTAX INTEGER { passed (1), failed (2) } ACCESS read-only STATUS mandatory DESCRIPTION Self test results for the module. ::= { cardSelfTest 3 } SYNTAX DisplayString (SIZE(0..40)) ACCESS read-only STATUS mandatory DESCRIPTION Self test Result description ::= { cardSelfTest 4 } SYNTAX INTEGER { other (1), clear (2) } ACCESS read-write STATUS mandatory DESCRIPTION This object is used for clearing the result of an online diagnostics(or other self tests). - appn Cn Number Active Ports
- appnCnNumberActivePorts (defined in Nortel-Magellan-Passport-AppnMIB)
This attribute specifies the number of active ports under this ConnectionNetwork.
