The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for memory size
- Sys System Memory Size
- a3ComSysSystemMemorySize 1.3.6.1.4.1.43.29.4.1.6 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The amount of memory (RAM), in bytes, present on the system processor board. - Sys System Flash Memory Size
- a3ComSysSystemFlashMemorySize 1.3.6.1.4.1.43.29.4.1.7 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The amount of flash memory, in bytes, present on the system processor board. - Sys System non-volatile Memory Size
- a3ComSysSystemNvMemorySize 1.3.6.1.4.1.43.29.4.1.8 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The amount of non-volatile memory, in bytes, present on the system processor board. - Sys System Frame Processor Memory Size
- a3ComSysSystemFPMemorySize 1.3.6.1.4.1.43.29.4.1.31 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The amount of frame processor memory (RAM), in bytes. - Host Resources Memory Size
- hrMemorySize 1.3.6.1.2.1.25.2.2 (defined in HOST-RESOURCES-MIB)
The amount of physical read-write main memory, typically RAM, contained by the host. - Host Resources Memory Size
- hrMemorySize 1.3.6.1.2.1.25.2.2 (defined in rfc1514)
The amount of physical main memory contained by the host. - IBM APPN Memory Size
- ibmappnMemorySize 1.3.6.1.4.1.2.6.2.13.1.7.1 (defined in rfc1593)
Size of the shared storage segment, as obtained by storage management from the underlying operating system. - Compaq Host Server Physical Memory Size
- cpqHoPhysicalMemorySize 1.3.6.1.4.1.232.11.2.13.1 (defined in CPQHOST)
Total amount of physical memory as seen by the OS (in megabytes). A -1 will be returned if this value could not be determined. - Compaq Host Server Paging Memory Size
- cpqHoPagingMemorySize 1.3.6.1.4.1.232.11.2.13.3 (defined in CPQHOST)
Total virtual memory available from the OS (in megabytes). A -1 will be returned if this value could not be determined. - Compaq Specific PC Server Memory Module Size
- cpqSiMemModuleSize 1.3.6.1.4.1.232.2.2.4.5.1.3 (defined in CPQSINFO)
Module memory size in kilobytes. A kilobyte of memory is defined as 1024 bytes. - Compaq Standard PC Server Equipment Eisa Memory Size
- cpqSeEisaMemSize 1.3.6.1.4.1.232.1.2.5.3.1.5 (defined in CPQSTDEQ)
The size in bytes of the memory configuration. - Compaq Standard PC Server Equipment Eisa Memory Data Size
- cpqSeEisaMemDataSize 1.3.6.1.4.1.232.1.2.5.3.1.11 (defined in CPQSTDEQ)
The data access size for the memory in bits. - Compaq Standard PC Server Equipment Pci Memory Size
- cpqSePciMemorySize 1.3.6.1.4.1.232.1.2.13.3.1.7 (defined in CPQSTDEQ)
This variable specifies how much address space this function requires. A value of 0 will be returned if the agent cannot obtain this information. - sfcs Proxy Config Tx Memory Size
- sfcsProxyConfigTxMemSize 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.3 (defined in ctron-sfcs-mib)
Indicates the size of the port's Transmission memory in K. The memory size is always 1K. - sfps Memory Heap Statistics Heap Size
- sfpsMemHeapStatsHeapSize 1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.4 (defined in ctron-sfps-esys-mib)
- Cabletron Smart Switch Router Memory Size
- capMemorySize 1.3.6.1.4.1.52.2501.1.270.4.1.1.4 (defined in ctron-ssr-capacity-mib)
Memory device total memory capacity expressed in blocks. - Cabletron Smart Switch Router Memory Block Size
- capMemoryBlockSize 1.3.6.1.4.1.52.2501.1.270.4.1.1.7 (defined in ctron-ssr-capacity-mib)
Size of the memory blocks on the memory device. This is the minimum block size of memory returned when memory is requested and is expressed in bytes. - rlp Memory Size
- rlpMemorySize 1.3.6.1.4.1.173.7.2.2.1.3 (defined in netlink-specific-mib)
The amount of memory installed on this RLP - rbtws Sys Cpu Memory Size
- rbtwsSysCpuMemorySize 1.3.6.1.4.1.52.4.15.1.4.8.1.1.6 (defined in rbtws-system-mib)
Maximum available CPU Memory (RAM) in KBytes. This is the memory available to the Wireless Switch software. May be less than physical RAM size. - VMWare Vm Memory Size
- vmwVmMemSize 1.3.6.1.4.1.6876.2.1.1.5 (defined in VMWARE-VMINFO-MIB)
Memory configured for this virtual machine. Memory > MAX Integer32 is reported as max integer32. VIM Property: memoryMB MOB: https://esx.example.com/mob/?moid=vmwVmIdx&doPath=config%2ehardware - VMWare Memory Size
- vmwMemSize 1.3.6.1.4.1.6876.3.2.1 (defined in VMWARE-RESOURCES-MIB)
Amount of physical memory present on machine as provided by Hypervisor. It is computed from the sum of vmwMemCOS plus unreserved property as reported VIM subsystem. Unreserved is computed from hypervisor's total number of memory pages. VIM Parent Container: https://esx.example.com/mob/?moid=memorySystem VIM property: unreserved MOB: https://esx.example.com/mob/?moid=memoryManagerSystem&doPath=consoleReservationInfo For reference here two other related VIM properties: VIM property: memorySize MOB: https://esx.example.com/mob/?moid=ha%2dhost&doPath=summary%2ehardware VIM property: totalMemory MOB: https://esx.example.com/mob/?moid=ha%2dcompute%2dres&doPath=summary ::= { vmwMemory 1 } SYNTAX Gauge32 UNITS "kilobytes This managed object reports memory allocated for COS, theConsole OS (aka Service Console) which is a memory region carved out of physical memory to boot a RedHat Linux distribution/provides device management interface. Note that in the VMware ESXi product there is no COS so this will report 0. This managed object reports the amount of physical memory allocated to the COS. VIM Parent Container: https://esx.example.com/mob/?moid=memorySystem VIM property: serviceConsoleReserved MOB: https://esx.example.com/mob/?moid=memoryManagerSystem&doPath=consoleReservationInfo ::= { vmwMemory 2 } SYNTAX Gauge32 UNITS "kilobytes Amount of memory available to run Virutal Machines and to allocate for hypervisor needs. It is computed by subtracting vmwMemCOS from vmwMemSize. The result is the amount of memory available to VMs and to the hypervisor. To get a more accurate view of memory available to VMs the following property represents the amount of resources available for the root resource pool for running virtual machines. VIM property: effectiveMemory MOB: https://esx.example.com/mob/?moid=ha%2dcompute%2dres&doPath=summary ::= { vmwMemory 3 } -- Storage subtree vmwStorage OBJECT IDENTIFIER ::= { vmwResources 5 } SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION Number of entries in vmwHostBusAdapterTable. - Enterasys R2 Management Memory Size
- etsysR2MgmtMemorySize 1.3.6.1.4.1.5624.1.2.11.1.1.1 (defined in enterasys-R2Management)
The size of the memory in the Access Point in Mbytes. - shared Memory Rm If Output Q Requested Max Size
- sharedMemRmIfOutputQRequestedMaxSize 1.3.6.1.4.1.9.10.10.1.6.1.1.3 (defined in CISCO-ATM-RM-MIB)
This object reflects an explicit configuration of the maximum number of cells that may occupy this queue. If the value of this object is 0, the maximum size in effect is a default value calculated by software. Prior to any user configuration, the value of this object is 0. The actual maximum size is reflected in the object sharedMemRmIfOutputQInstalledMaxSize (and is a default value calculated by software). Setting this value to 0 causes the size to assume it's default value. When changing a port that is up, must be set in conjunction with the force object (sharedMemRmIfOutputQMaxSizeForce) to take effect. - shared Memory Rm If Output Q Installed Max Size
- sharedMemRmIfOutputQInstalledMaxSize 1.3.6.1.4.1.9.10.10.1.6.1.1.4 (defined in CISCO-ATM-RM-MIB)
The maximum number of cells that may occupy this queue. Will be a multiple of 32. Explicit configuration of maximum size are made via the object sharedMemrmIfOutputQRequestedMaxSize. Such requests are rounded up to the nearest multiple of 32 prior to installation. - shared Memory Rm If Output Q Max Size Force
- sharedMemRmIfOutputQMaxSizeForce 1.3.6.1.4.1.9.10.10.1.6.1.1.5 (defined in CISCO-ATM-RM-MIB)
Must be set to forceChange to allow changing of sharedMemRmIfOutputQRequestedMaxSize for a queue on an interface that is 'up'. This is because such a change causes the interface to lose data while the size is changed. Once the change takes place, the force object assumes the noForceChange value. - Cisco Enhanced Memory Buffer Size
- cempMemBufferSize 1.3.6.1.4.1.9.9.221.1.1.2.1.5 (defined in CISCO-ENHANCED-MEMPOOL-MIB)
Indicates the size of buffer element in number of bytes on the physical entity. - Cisco Enhanced Memory Buffer Cache Size
- cempMemBufferCacheSize 1.3.6.1.4.1.9.9.221.1.1.3.1.1 (defined in CISCO-ENHANCED-MEMPOOL-MIB)
Indicates the number of buffers in the cache pool on the physical entity. - IBM APPN Memory Size
- ibmappnMemorySize 1.3.6.1.4.1.2.6.2.13.1.7.1 (defined in ibm-mem)
Size of the shared memory chunk, as obtained by memory management from the underlying operating system, that is allocated to this APPN node. - system Hardware Memory Size
- systemHardwareMemorySize 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.4 (defined in ALCATEL-IND1-SYSTEM-MIB)
This object identifies the size of the RAM memory available on this CMM. It is the total RAM hardware memory and does not indicate how much of the memory is free, used, etc.
