The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for connect status
- atmx Vp Cross Connect Admin Status
- atmxVpCrossConnectAdminStatus 1.3.6.1.4.1.800.2.9.1.5.1.1.8 (defined in XYLAN-CSM-MIB)
The value of this object identifies the desired administrative status of this bi-directional VP cross-connect. The up and down states indicate that the traffic flow is enabled and disabled respectively on this VP cross-connect. - atmx Vp Cross Connect L2 H Operation Status
- atmxVpCrossConnectL2HOperStatus 1.3.6.1.4.1.800.2.9.1.5.1.1.9 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VP cross-connect from low to high direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atmx Vp Cross Connect H2 L Operation Status
- atmxVpCrossConnectH2LOperStatus 1.3.6.1.4.1.800.2.9.1.5.1.1.10 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VP cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atmx Vp Cross Connect Row Status
- atmxVpCrossConnectRowStatus 1.3.6.1.4.1.800.2.9.1.5.1.1.13 (defined in XYLAN-CSM-MIB)
The status of this entry in the atmxVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the atmxVplTable or to change or delete an existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. This object cannot be set to `active' unless the following columnar object exists in this row: atmxVpCrossConnectAdminStatus. To turn on a VP cross-connect, the atmxVpCrossConnectAdminStatus is set to `up'. Xylan implements createAndWait along with create&Go as create. Create is basically a superset. - atmx Service Vp Cross Connect Row Status
- atmxSvcVpCrossConnectRowStatus 1.3.6.1.4.1.800.2.9.1.5.2.1.10 (defined in XYLAN-CSM-MIB)
This object can be used to delete rows in the atmSvcVpCrossConnectTable. But unless we require it for specific reasons we will not allow creation/deletion - atmx Vc Cross Connect Admin Status
- atmxVcCrossConnectAdminStatus 1.3.6.1.4.1.800.2.9.1.7.1.1.10 (defined in XYLAN-CSM-MIB)
The value of this object identifies the desired administrative status of this bi-directional VC cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on this VC cross-connect. - atmx Vc Cross Connect L2 H Operation Status
- atmxVcCrossConnectL2HOperStatus 1.3.6.1.4.1.800.2.9.1.7.1.1.11 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VC cross-connect from low to high direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atmx Vc Cross Connect H2 L Operation Status
- atmxVcCrossConnectH2LOperStatus 1.3.6.1.4.1.800.2.9.1.7.1.1.12 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VC cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atmx Vc Cross Connect Row Status
- atmxVcCrossConnectRowStatus 1.3.6.1.4.1.800.2.9.1.7.1.1.15 (defined in XYLAN-CSM-MIB)
The status of this entry in the atmxVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using the atmxVclTable or to change or delete existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. This object cannot be set to `active' unless the following columnar object exists in this row: atmxVcCrossConnectAdminStatus. To turn on a VC cross-connect, the atmxVcCrossConnectAdminStatus is set to `up'. Xylan implements createAndWait along with create&Go as create. Create is basically a superset. - atmx Service Vc Cross Connect Row Status
- atmxSvcVcCrossConnectRowStatus 1.3.6.1.4.1.800.2.9.1.7.2.1.12 (defined in XYLAN-CSM-MIB)
This object is used to indicate the status of the SVC in the atmSvcVcCrossConnectTable. - Xylan ATM Vp Cross Connect L2 H Operation Status
- xylnatmVpCrossConnectL2HOperStatus 1.3.6.1.4.1.800.2.9.1.14.1.1.13 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VC cross-connect from low to high direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - Xylan ATM Vp Cross Connect H2 L Operation Status
- xylnatmVpCrossConnectH2LOperStatus 1.3.6.1.4.1.800.2.9.1.14.1.1.14 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VC cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - Xylan ATM Vp Cross Connect Row Status
- xylnatmVpCrossConnectRowStatus 1.3.6.1.4.1.800.2.9.1.14.1.1.17 (defined in XYLAN-CSM-MIB)
This object is used to create, delete or modify a row in this table. To create a new CrossConnect, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the following columnar objects exist in this row: xylnatmVcCrossConnectLowRxTrafficDescrIndex, xylnatmVcCrossConnectLowTxTrafficDescrIndex. Xylan implements createAndWait along with create&Go as create. Create is basically a superset. In addition, if the local VCL end-point is also the VCC end-point - Xylan ATM Vc Cross Connect L2 H Operation Status
- xylnatmVcCrossConnectL2HOperStatus 1.3.6.1.4.1.800.2.9.1.13.1.1.15 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VC cross-connect from low to high direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - Xylan ATM Vc Cross Connect H2 L Operation Status
- xylnatmVcCrossConnectH2LOperStatus 1.3.6.1.4.1.800.2.9.1.13.1.1.16 (defined in XYLAN-CSM-MIB)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VC cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - Xylan ATM Vc Cross Connect Row Status
- xylnatmVcCrossConnectRowStatus 1.3.6.1.4.1.800.2.9.1.13.1.1.19 (defined in XYLAN-CSM-MIB)
This object is used to create, delete or modify a row in this table. To create a new CrossConnect, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the following columnar objects exist in this row: xylnatmVcCrossConnectLowRxTrafficDescrIndex, xylnatmVcCrossConnectLowTxTrafficDescrIndex. Xylan implements createAndWait along with create&Go as create. Create is basically a superset. In addition, if the local VCL end-point is also the VCC end-point - Frame Relay PVC Connect Admin Status
- frPVCConnectAdminStatus 1.3.6.1.2.1.10.44.1.5.1.6 (defined in rfc1604)
The value of this object identifies the desired administrative status of this bi-directional PVC segment. The active state means the PVC segment is currently operational; the inactive state means the PVC segment is currently not operational; the testing state means the PVC segment is currently undergoing a test. This state is set by an administrative entity. This value affects the PVC status indicated across the ingress NNI/UNI of both end-points of the bi-directional PVC segment. When a PVC segment connection is created using this table, this object is initially set to `inactive'. After the frPVCConnectRowStatus object is set to `active' (and the corresponding/associated entries in the frPVCEndptTable have their frPVCEndptRowStatus object set to `active'), the frPVCConnectAdminStatus object may be set to `active' to turn on the PVC segment connection. - Frame Relay PVC Connect L2h Operation Status
- frPVCConnectL2hOperStatus 1.3.6.1.2.1.10.44.1.5.1.7 (defined in rfc1604)
The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the low to high direction). The active state means it is currently operational; the inactive state means it is currently not operational; the testing state means it is currently undergoing a test; the unknown state means the status of it currently can not be determined. This value affects the PVC status indicated across the ingress NNI/UNI (low side) of the PVC segment. - Frame Relay PVC Connect H2l Operation Status
- frPVCConnectH2lOperStatus 1.3.6.1.2.1.10.44.1.5.1.8 (defined in rfc1604)
The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the high to low direction). The active state means it is currently operational; the inactive state means it is currently not operational; the testing state means it is currently undergoing a test; the unknown state means the status of it currently can not be determined. This value affects the PVC status indicated across the ingress NNI/UNI (high side) of the PVC segment. - Frame Relay PVC Connect Row Status
- frPVCConnectRowStatus 1.3.6.1.2.1.10.44.1.5.1.11 (defined in rfc1604)
The status of this entry in the frPVCConnectTable. This variable is used to create new connections for the PVC end-points and to change existing connections of the PVC end- points. This object must be initially set to `createAndWait'. In this state, the agent checks the parameters in the associated entries in the frPVCEndptTable to verify that the PVC end-points can be connected (i.e., the In parameters for one PVC end-point are equal to the Out parameters for the other PVC end-point). This object can not be set to `active' unless the following columnar object exist in this row: frPVCConnectAdminStatus. The agent also supplies the associated value of frPVCConnectIndex for the frPVCEndptConnectIdentifier instances. To turn on a PVC segment connection, the frPVCConnectAdminStatus is set to `active'. - atm Vp Cross Connect Admin Status
- atmVpCrossConnectAdminStatus 1.3.6.1.2.1.37.1.9.1.6 (defined in rfc1695)
The value of this object identifies the desired administrative status of this bi-directional VP cross-connect. The up and down states indicate that the traffic flow is enabled and disabled respectively on this VP cross-connect. - atm Vp Cross Connect L2 H Operation Status
- atmVpCrossConnectL2HOperStatus 1.3.6.1.2.1.37.1.9.1.7 (defined in rfc1695)
The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VP cross-connect from low to high direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atm Vp Cross Connect H2 L Operation Status
- atmVpCrossConnectH2LOperStatus 1.3.6.1.2.1.37.1.9.1.8 (defined in rfc1695)
The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VP cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atm Vp Cross Connect Row Status
- atmVpCrossConnectRowStatus 1.3.6.1.2.1.37.1.9.1.11 (defined in rfc1695)
The status of this entry in the atmVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the atmVplTable or to change or delete an existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. This object cannot be set to `active' unless the following columnar object exists in this row: atmVpCrossConnectAdminStatus. To turn on a VP cross-connect, the atmVpCrossConnectAdminStatus is set to `up'. - atm Vc Cross Connect Admin Status
- atmVcCrossConnectAdminStatus 1.3.6.1.2.1.37.1.11.1.8 (defined in rfc1695)
The value of this object identifies the desired administrative status of this bi-directional VC cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on this VC cross-connect. - atm Vc Cross Connect L2 H Operation Status
- atmVcCrossConnectL2HOperStatus 1.3.6.1.2.1.37.1.11.1.9 (defined in rfc1695)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VC cross-connect from low to high direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atm Vc Cross Connect H2 L Operation Status
- atmVcCrossConnectH2LOperStatus 1.3.6.1.2.1.37.1.11.1.10 (defined in rfc1695)
The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VC cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined. - atm Vc Cross Connect Row Status
- atmVcCrossConnectRowStatus 1.3.6.1.2.1.37.1.11.1.13 (defined in rfc1695)
The status of this entry in the atmVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using the atmVclTable or to change or delete existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. This object cannot be set to `active' unless the following columnar object exists in this row: atmVcCrossConnectAdminStatus. To turn on a VC cross-connect, the atmVcCrossConnectAdminStatus is set to `up'. - Compaq Fibre Array Fibre Channel Switch Fibre Connect Status
- cpqFcSwitchFibreConnectStatus 1.3.6.1.4.1.232.16.4.1.1.1.12 (defined in CPQFCA)
Compaq Fibre Channel Switch Fibre Channel Connection Status. The following values are defined: other(1) The agent is unable to determine the status of the switch fibre channel connection. ok(2) The switch Fibre Channel connection is OK. offline(3) The switch Fibre Channel connection is offline. - Cisco ATM Vp Cross Connect Admin Status
- atmVpCrossConnectAdminStatus 1.3.6.1.2.1.37.1.9.1.6 (defined in ATM-MIB)
The desired administrative status of this bi-directional VP cross-connect. - Cisco ATM Vp Cross Connect L 2 H Operation Status
- atmVpCrossConnectL2HOperStatus 1.3.6.1.2.1.37.1.9.1.7 (defined in ATM-MIB)
The operational status of the VP cross-connect in one direction; (i.e., from the low to high direction). - Cisco ATM Vp Cross Connect H 2 L Operation Status
- atmVpCrossConnectH2LOperStatus 1.3.6.1.2.1.37.1.9.1.8 (defined in ATM-MIB)
The operational status of the VP cross-connect in one direction; (i.e., from the high to low direction). - Cisco ATM Vp Cross Connect Row Status
- atmVpCrossConnectRowStatus 1.3.6.1.2.1.37.1.9.1.11 (defined in ATM-MIB)
The status of this entry in the atmVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the atmVplTable or to change or delete an existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. To turn on a VP cross-connect, the atmVpCrossConnectAdminStatus is set to `up'. - Cisco ATM Vc Cross Connect Admin Status
- atmVcCrossConnectAdminStatus 1.3.6.1.2.1.37.1.11.1.8 (defined in ATM-MIB)
The desired administrative status of this bi-directional VC cross-connect. - Cisco ATM Vc Cross Connect L 2 H Operation Status
- atmVcCrossConnectL2HOperStatus 1.3.6.1.2.1.37.1.11.1.9 (defined in ATM-MIB)
The current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). - Cisco ATM Vc Cross Connect H 2 L Operation Status
- atmVcCrossConnectH2LOperStatus 1.3.6.1.2.1.37.1.11.1.10 (defined in ATM-MIB)
The current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). - Cisco ATM Vc Cross Connect Row Status
- atmVcCrossConnectRowStatus 1.3.6.1.2.1.37.1.11.1.13 (defined in ATM-MIB)
The status of this entry in the atmVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using the atmVclTable or to change or delete existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. To turn on a VC cross-connect, the atmVcCrossConnectAdminStatus is set to `up'. - Cisco ATM Service Vp Cross Connect Row Status
- atmSvcVpCrossConnectRowStatus 1.3.6.1.2.1.37.1.14.1.1.1.7 (defined in ATM2-MIB)
This object is used to delete rows in the atmSvcVpCrossConnectTable. - Cisco ATM Service Vc Cross Connect Row Status
- atmSvcVcCrossConnectRowStatus 1.3.6.1.2.1.37.1.14.1.2.1.9 (defined in ATM2-MIB)
This object is used to delete rows in the atmSvcVcCrossConnectTable. - Cisco Distributed Director Host Connect Configuration Row Status
- cddHostConnectCfgRowStatus 1.3.6.1.4.1.9.9.197.1.2.2.1.3 (defined in CISCO-DIST-DIRECTOR-MIB)
The status of the row. This object is used to create a new row or delete an existing row in this table.
