The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for byte count
- Cabletron Inb Utilization high Byte Count A
- ctInbUtilHiByteCountA 1.3.6.1.4.1.52.4.1.2.12.2.1.2.1.3 (defined in ctinb2-mib)
The high-order 32 bits of the 64-bit entity which represents the number of bytes transferred from the source module to the destination module across INB channel A during the last sampling interval. This 64-bit byte count may be calculated as: ctInbUtilByteCountA = (ctInbUtilHiByteCountA * 2**32) + ctInbUtilLoByteCountA - Cabletron Inb Utilization Low Byte Count A
- ctInbUtilLoByteCountA 1.3.6.1.4.1.52.4.1.2.12.2.1.2.1.4 (defined in ctinb2-mib)
The low-order 32 bits of the 64-bit entity which represents the number of bytes transferred from the source module to the destination module across INB channel A during the last sampling interval. This 64-bit byte count may be calculated as: ctInbUtilByteCountA = (ctInbUtilHiByteCountA * 2**32) + ctInbUtilLoByteCountA - Cabletron Inb Utilization high Byte Count B
- ctInbUtilHiByteCountB 1.3.6.1.4.1.52.4.1.2.12.2.1.2.1.5 (defined in ctinb2-mib)
The high-order 32 bits of the 64-bit entity which represents the number of bytes transferred from the source module to the destination module across INB channel B during the last sampling interval. This 64-bit byte count may be calculated as: ctInbUtilByteCountB = (ctInbUtilHiByteCountB * 2**32) + ctInbUtilLoByteCountB - Cabletron Inb Utilization Low Byte Count B
- ctInbUtilLoByteCountB 1.3.6.1.4.1.52.4.1.2.12.2.1.2.1.6 (defined in ctinb2-mib)
The low-order 32 bits of the 64-bit entity which represents the number of bytes transferred from the source module to the destination module across INB channel B during the last sampling interval. This 64-bit byte count may be calculated as: ctInbUtilByteCountB = (ctInbUtilHiByteCountB * 2**32) + ctInbUtilLoByteCountB - ap W Station Session Tx Byte Count
- apWStationSessionTxByteCount 1.3.6.1.4.1.52.4.13.13.1.1.14 (defined in ctron-ap3000-mib)
This is the number of bytes transmitted from the client to the AP. It includes the bytes of data, control and management packets. - ap W Station Session Rx Byte Count
- apWStationSessionRxByteCount 1.3.6.1.4.1.52.4.13.13.1.1.15 (defined in ctron-ap3000-mib)
This is the number of unicast bytes transmitted from the AP to the client. It includes the bytes of data, control and management packets. - Cabletron Wan IMux Channel Byte Count
- ctWanMuxChannelByteCount 1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.6 (defined in ctron-wan-imux-mib)
Returns a value which represents a cumulative count of bytes transmitted out from this interface. The count includes any bytes transmitted across the physical medium, less physical medium framing. - Cabletron Wan Multi IMux Channel Byte Count
- ctWanMMuxChannelByteCount 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.7 (defined in ctron-wan-multi-imux-mib)
Returns a value which represents a cumulative count of bytes transmitted out from this interface. The count includes any bytes transmitted across the physical medium, less physical medium framing. - Cisco Cable QOS monitor Cmts Enforce Rule Byte Count
- ccqmCmtsEnfRuleByteCount 1.3.6.1.4.1.9.9.341.1.1.1.1.7 (defined in CISCO-CABLE-QOS-MONITOR-MIB)
The number of kbytes that the subscriber can transmit in the monitoring duration as indicated by ccqmCmtsEnfRuleMonDuration before being flagged as over consuming. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1). - Cisco Cable QOS monitor Enforce Rule Violate Byte Count
- ccqmEnfRuleViolateByteCount 1.3.6.1.4.1.9.9.341.1.2.2.1.4 (defined in CISCO-CABLE-QOS-MONITOR-MIB)
The total kbytes consumed by the subscriber in the monitoring duration as specified in the corresponding enforce rule object ccqmCmtsEnfRuleMonDuration. If the monitoring is restarted due to change in enforce rule or any other circumstance this count will be reset.
