rfc1389 Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
rfc1389-rip-2
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
rfc1389-rip-2
.
OID list for rfc1389
- rip2GlobalRouteChanges
- The number of changes made to the IP Route Da- tabase by RIP.
- rip2GlobalQueries
- The number of responses sent to RIP queries from other systems.
- rip2IfStatTable
- A list of subnets which require separate status monitoring in RIP.
- rip2IfStatEntry
- A Single Routing Domain in a single Subnet.
- rip2IfStatAddress
- The IP Address of this system on the indicated subnet.
- rip2IfStatRcvBadPackets
- The number of RIP response packets received by the RIP process which were subsequently dis- carded for any reason (e.g. a version 0 packet, or an unknown command type).
- rip2IfStatRcvBadRoutes
- The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
- rip2IfStatSentUpdates
- The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
- rip2IfStatStatus
- Writing invalid has the effect of deleting this interface.
- rip2IfConfTable
- A list of subnets which require separate con- figuration in RIP.
- rip2IfConfEntry
- A Single Routing Domain in a single Subnet.
- rip2IfConfAddress
- The IP Address of this system on the indicated subnet.
- rip2IfConfDomain
- Value inserted into the Routing Domain field of all RIP packets sent on this interface.
- rip2IfConfAuthType
- The type of Authentication used on this inter- face.
- rip2IfConfAuthKey
- The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has the value simplePass- word. A modification of the corresponding in- stance of rip2IfConfAuthType does not modify the rip2IfConfAu ...
- rip2IfConfSend
- What the router sends on this interface. ripVersion1 implies sending RIP updates compli- ant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multi- casting RIP-2 up ...
- rip2IfConfReceive
- This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast pack- ets.
- rip2IfConfDefaultMetric
- This variable indicates what metric is to be used as a default route in RIP updates ori- ginated on this interface. A value of zero in- dicates that no default route should be ori- ginated; in this case, a default route via another router m ...
- rip2IfConfStatus
- Writing invalid has the effect of deleting this interface.
- rip2PeerTable
- A list of RIP Peers.
- rip2PeerEntry
- Information regarding a single routing peer.
- rip2PeerAddress
- The IP Address of the Peer System.
- rip2PeerDomain
- The value in the Routing Domain field in RIP packets received from the peer.
- rip2PeerLastUpdate
- The value of sysUpTime when the most recent RIP update was received from this system.
- rip2PeerVersion
- The RIP version number in the header of the last RIP packet received.
- rip2PeerRcvBadPackets
- The number of RIP response packets from this peer discarded as invalid.
- rip2PeerRcvBadRoutes
- The number of routes from this peer that were ignored because the entry format was invalid.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
