rfc1229

rfc1229 Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the rfc1229-gintf . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the rfc1229-gintf .

OID list for rfc1229

ifExtnsTable
A list of interfaces extension entries. The number of entries is given by the value of ifNumber, defined in [4,6].
ifExtnsEntry
An extension to the interfaces entry, defined in [4,6], containing additional objects at the subnetwork layer and below for a particular interface.
ifExtnsIfIndex
The value of this object identifies the interface for which this entry contains extended management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,6], for the same interface.
ifExtnsChipSet
This object identifies the hardware chip set being used in the interface. The assignment of OBJECT IDENTIFIERs to various types of hardware chip sets is managed by the IANA. If the hardware chip set is unknown, the object identifier unknownChipSet OBJEC ...
ifExtnsRevWare
An arbitrary octet string that describes the firmware version of this interface. It is intended that this should be human readable. It must only contain ASCII printable characters. Typically this will be the firmware version of the main interface softwa ...
ifExtnsMulticastsTransmittedOks
The count of frames successfully transmitted to a subnetwork or link-layer multicast destination address other than a broadcast address. For a MAC layer protocol, this includes both Group and Functional addresses.
ifExtnsBroadcastsTransmittedOks
The count of frames successfully transmitted to a subnetwork or link-layer broadcast addresses. It does not include frames sent to a multicast address.
ifExtnsMulticastsReceivedOks
The count of frames successfully received that are directed to an active subnetwork or link-layer multicast address (for a MAC layer protocol, this includes both Group and Functional addresses). This does not include frames directed to a broadcast address ...
ifExtnsBroadcastsReceivedOks
The count of frames successfully received that are directed to a subnetwork or link-layer broadcast address. This does not include frames received with errors.
ifExtnsPromiscuous
This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal ...
ifExtnsTestTable
This table contains one entry per interface.
ifExtnsTestEntry
An entry containing objects for invoking tests on an interface.
ifExtnsTestIfIndex
The value of this object identifies the interface for which this entry contains information on interface tests. The value of this object for a particular interface has the same value as the ifIndex object, defined in [4,6], for the same interface.
ifExtnsTestCommunity
This object contains the name of the SNMP authentication community [5] which was used to authenticate the SNMP Message which invoked the current or most recent test on this interface. If the authentication community is unknown or undefined, this value co ...
ifExtnsTestRequestId
This object contains the value of the request-id field in the SNMP PDU [5] which invoked the current or most recent test on this interface. If the request-id is unknown or undefined, this value contains the value zero.
ifExtnsTestType
A control variable used to start and stop operator-initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in associ- ation with specific types of interface. However, this document assigns a value for a full-duple ...
ifExtnsTestResult
This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as cou ...
ifExtnsTestCode
This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. However, one sub ...
ifExtnsRcvAddrTable
This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/ frames on a particular interface. When an interface is operating in promiscuous mode, entries are only required for those address ...
ifExtnsRcvAddrEntry
A list of objects identifying an address for which the system will accept packets/ frames on a particular interface.
ifExtnsRcvAddrIfIndex
The value of ifIndex, defined in [4,6], of an interface which recognizes this entry's address.
ifExtnsRcvAddress
An address for which the system will accept packets/frames on this entry's interface.
ifExtnsRcvAddrStatus
This object has the value nonVolatile(4) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(3) are valid and exist, but have not been saved, so that will not ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list