mdmDTESyncTimingSource - Modem DTE Sync Timing Source - rfc1696

MIBs list

mdmDTESyncTimingSource

Modem DTE Sync Timing Source
1.3.6.1.2.1.38.1.6.1.3

The clock source for synchronous transmissions. If set to internal(1), the modem is the clock source and sends the clock signals to the DTE. If set to external(2), the transmit clock signals are provided by the DTE. If loopback(3), the modem receiver clock is used for the transmit clock. If network(4), the clock signals are supplied by the DCE interface. If the modem is not in synchronous mode, setting this object will have no effect on the current operations of the modem.

Back to rfc1696 MIB page.

IPHost Network monitor uses SNMP for monitoring health and availability of devices and applications in your network. You can send a SNMP Set to any remote device to monitor a specific SNMP object (CPU, Memory, Disk, Server Temperature, RAID failures, IO statistics, connection counts, error and much more).

Reliable monitoring of mdmDTESyncTimingSource with IPHost Network Monitor

MIBs list