icfVgRepeaterReset - HP ICF Vg Repeater Reset - hpprocurve-v2-icfvg

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

icfVgRepeaterReset

HP ICF Vg Repeater Reset
1.3.6.1.4.1.11.2.14.8.1.1.1.9

Setting this object to reset(2) causes the repeater to transition to its initial state as specified in clause 12 [IEEE Draft Std 802.12]. Setting this object to noReset(1) has no effect. The agent will always return the value noReset(1) when this object is read. After receiving a request to set this variable to reset(2), the agent is allowed to delay the reset for a short period. For example, the implementor may choose to delay the reset long enough to allow the SNMP response to be transmitted. In any event, the SNMP response must be transmitted. This action does not reset the management counters defined in this document nor does it affect the icfVgPortAdminStatus parameters. Included in this action is the execution of a disruptive Self-Test with the following characteristics: a) The nature of the tests is not specified. b) The test resets the repeater but without affecting management information about the repeater. c) The test does not inject packets onto any segment. d) Packets received during the test may or may not be transferred. e) The test does not interfere with management functions. After performing this self-test, the agent will update the repeater health information (including icfVgRepeaterHealthState and icfVgRepeaterHealthText).

Back to hpprocurve-v2-icfvg MIB page.

IPHost Network monitor allows you to monitor icfVgRepeaterReset on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.

MIBs list