hpRptrMonGlobalDataRateMismatches - hp Rptr Monitor Global Data Rate Mismatches - hpprocurve-v2-hprptr

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

hpRptrMonGlobalDataRateMismatches

hp Rptr Monitor Global Data Rate Mismatches
1.3.6.1.4.1.11.2.14.11.2.2.1.1.11

********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each frame received on any port that meets all of the following conditions: a) The CollisionEvent signal is not asserted. b) The ActivityDuration is greater than ValidPacketMinTime. c) The frequency (data rate) is detectably mismatched from the local transmit frequency. The exact degree of mismatch is vendor specific and is to be defined by the vendor for conformance testing. When this event occurs, other counters whose increment conditions were satisfied may or may not also be incremented. This counter is the summation of the values of the rptrMonitorPortDatRateMismatches counter for all of the ports in this repeater.

Back to hpprocurve-v2-hprptr MIB page.

IPHost Network monitor allows you to monitor hpRptrMonGlobalDataRateMismatches on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

MIBs list