prtinputmediadimfeeddirdeclared - prtinputmediadimfeeddirdeclared - hpclj4500

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

prtinputmediadimfeeddirdeclared

prtinputmediadimfeeddirdeclared
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4

This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: The object for tray 1 is read-write and can be used to set the feed dimension for the media size. The objects for trays 2 and 3 are read-only since LaserJet 4500 senses the media size those trays. Therefore the objects for trays 2 and 3 behave the same as prtInputMediaDimFeedDirChosen for trays. Attempting to set this object for trays 2 and 3 will cause to be returned. The default values assume the trays are configured for letter size paper. Valid values range between 50000 and 140000 if prtInputDimUnit is ePtenThousandthsOfInches and 127000 to 355600 if prtInputDimUnit is ePmicrometers.

Back to hpclj4500 MIB page.

IPHost Network monitor allows you to monitor prtinputmediadimfeeddirdeclared on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco mobile switches right now.

MIBs list