prtoutputstatus - prtoutputstatus - clj4500

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

prtoutputstatus

prtoutputstatus
1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6

The current status of this output sub-unit. Additional information: The default value assumes an empty bin. The value of this object is a combination of the following values: Bit 0 is the least significant bit. Bit 0 : Availability Value Bit 1 : Availability Value Bit 2 : Availability Value Bit 3 : Non-Critical Value Bit 4 : Critical Value Bit 5 : On-Line Value Bit 6 : Transitioning Value The availability value can be one of the following: 0 Available & Idle 1 Unavailable & On request 2 Available & On standby 3 Unavailable & Broken 4 Available & Active 5 Unknown 6 Available & Busy The non-critical alert bit is set if the device has non-critical alerts. The critical alert bit is set if the device has critical alerts. The off-line bit is set if the device is off-line. The transitioning bit is set if the device is transitioning to an intended state. Bin is full, printing won't continue: Unavailable and OnRequest (1) + Critical Alerts(16) Paper is moving, bin is not full: Available and Busy (6) Paper is not moving, bin is not full: Available and Idle (0)

Back to clj4500 MIB page.

IPHost Network monitor allows you to monitor prtoutputstatus on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco routers right now.

MIBs list