xdsl2SCStatusBandSigAtten - xdsl2 SubCarrier Status Band Sig Atten - VDSL2-LINE-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

xdsl2SCStatusBandSigAtten

xdsl2 SubCarrier Status Band Sig Atten
1.3.6.1.4.1.2011.2.25.251.1.2.4.1.3

When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all subcarriers during Showtime after the diagnostics mode. When referring to the upstream direction, it is the measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all subcarriers during Showtime after the diagnostics mode. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated.

Back to VDSL2-LINE-MIB MIB page.

IPHost Network monitor allows you to monitor xdsl2SCStatusBandSigAtten on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco wireless switches right now.

Easy monitoring of xdsl2SCStatusBandSigAtten with IPHost tools

MIBs list