swPoESystemInfoManagementMode - Switch PoE System Info Management Mode

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a D-Link device in your network.

swPoESystemInfoManagementMode

Switch PoE System Info Management Mode
1.3.6.1.4.1.171.12.24.2.1.1.6

This mode can be either power_limit mode or auto mode. power_limit: If power supplied to the port exceeds the power limit specified for it, this port will be shut down. auto: The system will automatically determine the PD class of the device connected to the port in the first stage. Normally, the PD can be classified as class 1, 2, or 3. If the PD can not be classified, it will be classified as class 0. For class 0, it will assume that the PD may consume the max power allowed. At the power feeding stage, if the power supplied to the port exceeds the upper limit of the detected PD class, this port will be shut down. For the upper limit for each class, it is 4W for class 1 PD class, 7W for class 2, and 15.4W for class 3 PD and class 0 PD.

Back to PoE-MIB MIB page.

IPHost Network monitor allows you to monitor swPoESystemInfoManagementMode on D-Link device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring D-Link routers right now.

Easy monitoring of swPoESystemInfoManagementMode with IPHost tools

MIBs list