vRouteInterfaceEcanBypassMode - v Route Interface Ecan Bypass Mode

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

vRouteInterfaceEcanBypassMode

v Route Interface Ecan Bypass Mode
1.3.6.1.4.1.562.2.4.1.116.3.10.1.15

This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceRoute. This attribute only applies if v2 of echoCancellation is on. If ecanBypassMode is g165, the internal echo canceller is placed in bypass mode as per ITU-T G.165. If ecanBypassMode is g164, the internal echo canceller is placed in bypass mode as per ITU-T G.164. If ecanBypassMode is never, the internal echo canceller is never placed in bypass mode. This mode should only be used for debugging. This attribute does not apply to 1pE1V, 1pDS1V, J2MV, 1pE1Mvp, 1pDS1Mvp or 1pTTC2mMvp cards.

Back to Nortel-Magellan-Passport-VoiceNetworkingMIB MIB page.

IPHost Network monitor allows you to monitor vRouteInterfaceEcanBypassMode on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel switches right now.

Easy monitoring of vRouteInterfaceEcanBypassMode with IPHost tools

MIBs list