vs Framer End Of Call Pattern

1.3.6.1.4.1.562.2.4.1.80.2.12.1.17

This attribute specifies the pattern that indicates the end of a CCS call. The pattern is specified as a hexadecimal byte. If this pattern is detected for one second, the echo canceler is reset and will prepare itself to start a new call. When there is no call, this pattern replaces the PCM data that would normally be sent to the link. endOfCallPattern is not used if this VoiceService is running on a DS1V, E1V, 1pDS1V, 1pE1V and J2MV card. To determine the correct setting of endOfCallPattern, view the operational attribute recentIngressLineSamples while no calls are up. If endOfCallPattern is standard, the actual pattern used depends on the card this voice service is running on. If this voice service is running on a 1pDs1Mvp, 1pDS1Mvpe, 1pTTC2mMvp or 1pTTC2mMvpe card, the actual pattern used is 7f. If this voice service is running on a 1pE1Mvp or 1pE1Mvpe card, the actual pattern used is 54. The default value for endOfCallPattern is standard.