vsFramerEchoReturnLoss - vs Framer Echo Return Loss

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

vsFramerEchoReturnLoss

vs Framer Echo Return Loss
1.3.6.1.4.1.562.2.4.1.80.2.12.1.22

This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions. If the line quality is poor, in terms of echo, selecting a higher value may allow the echo canceller to perform better. A side effect is that the voice level is attenuated by the same amount, which may not always be acceptable. This attribute is not used if this VoiceService is running on a DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card.

Back to Nortel-Magellan-Passport-VoiceMIB MIB page.

IPHost Network monitor allows you to monitor vsFramerEchoReturnLoss on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel speech servers right now.

Easy monitoring of vsFramerEchoReturnLoss with IPHost tools

MIBs list