With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.
vsFramerDtmfRegeneration
vs Framer Dtmf Regeneration
1.3.6.1.4.1.562.2.4.1.80.2.12.1.34
This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfRegeneration is on, it is desired that DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is desired to be generated before being sent to the link. If dtmfRegeneration is off, DTMF tones are transported transparently. DTMF regeneration is not supported on 1pDS1V, 1pE1V, and J2MV cards. dtmfRegeneration must be off if this VoiceService is running on one of these cards. The negotiated DTMF regeneration is available in negotiatedDtmfRegeneration.
Back to Nortel-Magellan-Passport-VoiceMIB MIB page.
IPHost Network monitor allows you to monitor vsFramerDtmfRegeneration on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel secure routers right now.
