sig Chan E Isdn Tracing

1.3.6.1.4.1.562.2.4.1.115.14.17.1.1

This attribute defines which types of tracing are active on the signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueueSize attribute of the Lp/x Eng Ds/debug component must be greater than 0 and the operator's NMIS session must have the debug stream included in its data stream list (for example: set Nmis Telnet Session/1 dataStreams deb). Several types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and slows down call processing on a heavily loaded card. If there is message block exhaustion tracing is suspended for a period of time and then automatically re-enabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occurring. Protocol errors are also reported in summary form as alarms. q931Summary - summary of the Q.931 messages on the signalling link. q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Q.921 messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)