vncsVpDtmfRegeneration - vncs Vp Dtmf Regeneration

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

vncsVpDtmfRegeneration

vncs Vp Dtmf Regeneration
1.3.6.1.4.1.562.2.4.1.44.3.3.1.19

This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfRegeneration is on, it is desired that DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is desired to be generated before being sent to the link. If dtmfRegeneration is off, it is desired that DTMF tones are transported transparently as audio. DTMF regeneration is not supported on 1pDS1V, 1pE1V, and J2MV cards. On these cards, the value of dtmfRegeneration is ignored. The negotiated DTMF regeneration is available in Vsr Svs Framer negotiatedDtmfRegeneration.

Back to Nortel-Magellan-Passport-VncsCallServerMIB MIB page.

IPHost Network monitor allows you to monitor vncsVpDtmfRegeneration on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel switches right now.

Easy monitoring of vncsVpDtmfRegeneration with IPHost tools

MIBs list