frUniSigUpdateBCI - Frame Relay Uni Sig Update BCI

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

frUniSigUpdateBCI

Frame Relay Uni Sig Update BCI

This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated through incoming BECN bits. If updateBCI is set to on, then BCI bits for incoming frames will be set if the BECN on the frame is set. If updatBCI is set to off, then incoming BECN bits will have no effect. Setting updateBCI on for a DLCI means that the remote end of the DLCI, which is specified by the remotedna and remotedlci attributes of the dc component of the dlci, may perform Rate Adaptation using the flow of incoming BECN bits, in addition to internal Passport congestion management systems. If the rateAdaptation attribute of the remote dlci is provisioned as eirOnly, cirProportionate, or on, then congestion from another network connected to a Passport network may trigger dynamic congestion management. If the rateAdaptation attribute of the remote dlci is provisioned to off, then the setting of updateBCI attribute here will have no effect..

Back to Nortel-Magellan-Passport-FrameRelayUniMIB MIB page.

IPHost Network monitor allows you to monitor frUniSigUpdateBCI on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel secure routers right now.

Easy monitoring of frUniSigUpdateBCI with IPHost tools

MIBs list