frUniDlciDcTransferPriority - Frame Relay Uni Dlci Dc Transfer Priority

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

frUniDlciDcTransferPriority

Frame Relay Uni Dlci Dc Transfer Priority

This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 levels from 0 to 15. Each transfer priority n, where n is the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned under the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required. The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI.

Back to Nortel-Magellan-Passport-FrameRelayUniMIB MIB page.

IPHost Network monitor allows you to monitor frUniDlciDcTransferPriority on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel multiplexers right now.

Easy monitoring of frUniDlciDcTransferPriority with IPHost tools

MIBs list