frNniDlciTransferPriFromNwk - Frame Relay Nni Dlci Transfer Pri From Nwk

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Nortel device in your network.

frNniDlciTransferPriFromNwk

Frame Relay Nni Dlci Transfer Pri From Nwk

This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required.

Back to Nortel-Magellan-Passport-FrameRelayNniMIB MIB page.

IPHost Network monitor allows you to monitor frNniDlciTransferPriFromNwk on Allied Telesis device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Nortel multiplexers right now.

Easy monitoring of frNniDlciTransferPriFromNwk with IPHost tools

MIBs list